• Journal of the Korean Geotechnical Society
• /
• v.34 no.7
• /
• pp.39-49
• /
• 2018

Jacked pile that involves the use of hydraulic jacks to press the piles into the ground is free from noise and vibration, and is possibly installed within a limited construction area. Thus, as an alternative to conventional pile driving methods, pile jacking could become widely accepted for the construction projects in urban area (e.g., reconstruction or remodeling construction projects). Great concern has arisen over the prediction of axially loaded jacked pile behavior. Against this background, a series of pile load tests were hence conducted on a jacked steel pipe pile installed in weathered zone (i.e., weathered soil and weathered rock). From the test results, base resistance and shaft resistance for each test condition were evaluated and compared with the values predicted by the previous driven pile resistance assessment method. Test results showed that the previous driven pile resistance assessment method highly underestimated both the base and shaft resistances of a jacked pile; differences were more obviously observed with the shaft resistance. The reason for this discrepancy is that a driven pile normally experiences a larger number of loading/unloading cycles during installation, and therefore shows significantly degraded stiffness of surrounding soil. Based on the results of the pile load tests, particular attention was given to the modification of the previous driven pile resistance assessment method for investigating the axially loaded jacked pile behavior.

• KSBB Journal
• /
• v.24 no.3
• /
• pp.217-226
• /
• 2009

p53 undergoes various post-translational modifications, including phosphorylation, ubiquitination, sumoylation, acetylation, methylation, and poly(ADP-ribosyl)ation. Modification of p53 widely affects to various functions of p53. Acetylation and phosphorylation of p53 have been studied for regulating its transcriptional activity which is observed in various stress condition. Otherwise, ubiquitination of p53 by Mdm2 has been well-studied as a canonical ubiquitin-mediated proteasomal degradation pathway. Moreover several investigators have recently reported that ubiquitination of p53 modulates not only its proteasome-dependent degradation by poly-ubiquitination but also its localization and transcriptional activity by mono-ubiquitination which usually does not serve the proteasome dependent degradation. Here we review recent studies on the cellular functions of p53 regulated by post-translational modifications, particularly focusing on mechanisms of ubiquitination.

• Korean Chemical Engineering Research
• /
• v.43 no.1
• /
• pp.60-65
• /
• 2005

The electrosorption of U(VI) from waste water was carried out by using activated carbon fiber(ACF) felt electrode in a continuous electrosorption cell. In order to enhance the electrosorption capacity at lower potential, ACF felt was chemically modified in acidic, basic and neutral solution. Pore structure and functional groups of chemically modified ACF were examined, and the effect of treatment conditions was studied for the adsorption of U(VI). Specific surface area of all ACFs decreases by this treatment. The amount of acidic functional groups decreases with basic and neutral salt treatment, while the amount increases a lot with acidic treatment. The electrosorption capacity of U(VI) decreases on using the acid treated electrode due to the shielding effect of acidic functional groups. Base treated electrode enhances the capacity due to the reduction of acidic functional groups. The electrosorption amount of U(VI) on the base treated electrode at -0.3 V corresponds to that of ACF electrode at -0.9 V. Such a good adsorption capacity was not only due to the reduction of shielding effect but also the increase of $OH^-$ in the electric double layer on ACF surface by the application of negative potential.

• Fibers and Polymers
• /
• v.6 no.1
• /
• pp.19-27
• /
• 2005

High-speed melt spinning of syndiotactic polystyrene was carried out using high and low molecular weight poly­mers, HM s-PS and LM s-PS, at the throughput rates of 3 and 6 g/min. The effect of take-up velocity on the structure and properties of as-spun fibers was investigated. Wide angle X-ray diffraction (WAXD) patterns of the as-spun fibers revealed that the orientation-induced crystallization started to occur at the take-up velocities of 2-3 km/min. The crystal modification was a-form. Birefringence of as-spun fibers showed negative value, and the absolute value of birefringence increased with an increase in the take-up velocity. The cold crystallization temperature analyzed through the differential scanning calorimetry (OSC) decreased with an increase in the take-up velocity in the low speed region, whereas as the melting temperature increased after the on-set of orientation-induced crystallization. It was found that the fiber structure development proceeded from lower take-up velocities when the spinning conditions of higher molecular weight and lower throughput rate were adopted. The highest tensile modulus of 6.5 GPa was obtained for the fibers prepared at the spinning conditions of LM s-PS, 6 g/min and 5 km/min, whereas the highest tensile strength of 160 MPa was obtained for the HM s-PS fibers at the take-up velocity of 2 km/min. Elongation at break of as-spun fibers showed an abrupt increase, which was regarded as the brittle-duc­tile transition, in the low speed region, and subsequently decreased with an increase in the take-up velocity. There was a uni­versal relation between the thermal and mechanical properties of as-spun fibers and the birefringence of as-spun fibers when the fibers were still amorphous. The orientation-induced crystallization was found to start when the birefringence reached -0.02. After the starting of the orientation-induced crystallization, thermal and mechanical properties of as-spun fibers with similar level of birefringence varied significantly depending on the processing conditions.

• Journal of the Korean Geotechnical Society
• /
• v.20 no.3
• /
• pp.75-83
• /
• 2004

The Indiana Department of Transportation (INDOT) has permitted the use of Lime Kiln Dust (LKD) as a low-cost construction material in creating a workable platform for soil modification (not for soil stabilization) since the early 1990s on selected projects. However, the enhanced strength of soils with LKD has not been accounted for in the subgrade stability calculations in the design process. This study was initiated to evaluate how the lime kiln dust is a comparable material to hydrated lime. A series of laboratory tests were performed to assess the mechanical benefits of lime kiln dust in combination with various predominant fine grained soils encountered in the State of Indiana, such as A-4, A-6 and A-7-6. In the course of this study, several tests such as the Atterberg limits, standard Proctor, unconfined compression, CBR, volume stability, and resilient modulus were performed. As a result, mixtures of fine grained soils with 5% lime or 5% LKD substantially improve unconfined compressive strength up to 60% - 400%. CBR values for treated soils are in the range of 25 to 70 while those for untreated soils range from 3 to 18. In general, significant increase in resilient moduli of the soils treated with lime and LKD was observed. This indicates that lime kiln dust may be a viable, cost effective alternative to hydrated lime in enhancing the strength of fine grained soils.

• The Journal of Korean Academy of Prosthodontics
• /
• v.45 no.5
• /
• pp.589-600
• /
• 2007

Statement of Problem: Titanium has many advantages of high biocompatibility, physical porperties, low-weight, low price and radiolucency, but it is incompatible with conventional dental porcelain due to titanium's oxidative nature. Many previous studies have shown that they used the method of sandblast surface treatment prior to porcelain application, the researchs are processing about the method of acid etching or surface coating. Purpose: The purpose of this research is to study the effect on bond strength between titanium and porcelain when using macro-surface treatment and micro-surface treatment and macro and micro surface treatment. Material and method: In this study, we evaluated the bond strength by using 3-point bending test based on ISO 9693 after classified 7 groups-group P : polished with #1200 grit SiC paper, group SS : sandblasted with $50{\mu}m$ aluminum oxides, group LS : sandblasted with $250{\mu}m$ alumium oxides, group HC : treated with 10% hydrochloric acid, group NF : treated with 17% solution of fluoric acid and nitric acid, group SHC : treated with 10% hydrochloric aicd after sandblsting with $50{\mu}m$ alumium oxides, group SNF treated with 17% solution of fluoric acid and nitric acid. Results : Within the confines of our research, the following results can be deduced. 1. Group SS which was sandblasted with $50{\mu}m$ aluminum oxides showed the highest bond strength of 61.74 MPa and significant differences(P<0.05). The bond strengths with porcelain in groups treated acid etching after sandblasting decreased more preferable than the group treated with sandblasting only. It gives significant differences(P<0.05). 2. After surface treatments, the group treated with sandblasting showed irregular aspect formed many undercuts, in the SEM photographs. The group treated with hydrochloric acid had the sharp serrated surfaces, the group treated with the solution of fluoric acid and nitric acid had the smooth surfaces, the group with sandblasting and hydrochloric acid had irrigular and porous structure, the group with sandblasting and the solution of fluoric acid and nitric acid had crater-like surfaces. But all of the groups treated with acid etching was not found and undercut. Conclusion: In above results, average surface roughness increase, bond strength also increase, but surface topographs influences more greatly on bond strengths.

• Journal of The Korean Association For Science Education
• /
• v.22 no.3
• /
• pp.411-421
• /
• 2002

This study investigated small group processes in paired think-aloud problem solving. Two high school chemistry classes were assigned to St-SL group (using Strategy-Solve Listener) and SL group (Solver Listener), and their small-group behaviors were audio/video taped. Verbal behaviors of solver and listener in respect to 4 problem-solving stages and performance levels at each stage were analyzed. At the understanding stage, listeners in the St-SL group exhibited more behaviors of agreement to solver's understanding processes about given and goal of problem. As regards recalling a related law at the planning stage, solvers in the St-SL group exhibited more behaviors of modification based on listener's questions or pointing out. These verbal interactions seemed to have a positive effect on students' deriving the physical quantity with the proper laws. Few in both SL and St-SL groups exhibited the behaviors regarding setting up subgoals. No verbal behavior was observed in the SL group at the reviewing stage, and solvers in the St-SL group tended to ask for listener's agreement. However, only few performed the strategy explaining the meaning of answer at the molecular level correctly through the interactions. The St-SL group perceived that the understanding stage was the most helpful and that the planning or reviewing stages were difficult to apply.

• The Journal of Korean Academic Society of Nursing Education
• /
• v.7 no.2
• /
• pp.264-274
• /
• 2001

About the patients who visited the emergency department of a hospital, investigative study was performed to assess and to classify them with triage tool, and to estimate the characteristics of them. 210 patients older than 15 years were investigated. Among them 11 patients who had responded inappropriately were excluded and remaining 210 patients were chosen as study subjects. Investigation had been performed for 30 days from Jan. 10, 2001 to Feb. 9, 2001. The triage tool was designed through the modification of triage tools developed by Kim and Choi. The data were analyzed with the SPSS program using mean, standard deviation, frequency, percentage, ANOVA and Scheffe's test. The results were as follows: 1. Of the characteristics of the study subjects, mean age of patients were 55.76 years and 70-79 years group which included 41 patients(20.6%) were most numerous. 101 (51.8%) patients visited emergency room by 119 emergency service and 91(45.7%) patients walked with assistance. 127 patients were cared in internal medicine department. 2. The distribution of triage scores were from minimum 6 points to maximum 18 points with mean $13.76{\pm}2.58$ points. 3. Triage scores had significant relationship with age(F=13.349,P=0.000), visiting method (F=8.832, P=0.000), walking status(F=28.185, p=0.000), care department(F=2.596, P=0.019), and preexisting disease(F=12.012, P=0.000). 4. After trage there were no urgent patient, 35 emergent patients(17.6%),109 subemergent patients(54.8%), and 55 nonemergent patients (27.6%). The result of emergency care were 80 admission(40.2%), 59 discharge (29.6%), 34 ICU admission(17.1%), 14 transfer to other hospital(7%), 10 operation (5%), and 2 death (2%). 5. About the time required for triage, mean duration to triage were $7.54{\pm}2.28$ mins in emergent patients, mean $7.23{\pm}2.50$ mins in subemergent patients and mean $6.49{\pm}2.19$ mins in nonemergent patients. There were no differences in duration to triage according to the severity of triage. 6. Time required in emergency treatment were mean $116.23{\pm}88.10$ in emergent patients mean $101.61{\pm}73.27$ in subemergent patients and mean $81.56{\pm}61.01$ in nonemergent patients. There were no significant difference among groups. This study depicted that triage scores were below the middle level and there were many geriatric patients in this hospital. Among the characteristics of patients, age, visiting method, walking status, care department, and accompanying disease could be data for triage of emergency patients. With triage score of a patient, the outcome of emergency care of a patient could be anticipated and this could be basal data in determining the priority of emergency nursing.

• Publications of The Korean Astronomical Society
• /
• v.27 no.5
• /
• pp.419-429
• /
• 2012

In this paper, we propose a new re-quantization method after FFT processing to prevent the distortion of correlation result of VCS (VLBI Correlation Subsystem). The re-quantization is used to rearrange the data bit so as to reduce the data rate processed as 16-bit of FFT result of VCS. Having done this procedure, we found that the distorted spectrum of correlation result occurred in the delay tracking experiments by the re-quantization method introduced for initial design of VCS. In order to solve this, two kinds of re-quantization method, that is, the comparison and selection-type, are proposed. The first is to re-quantize the FFT result as a valid-bit by comparing with the input data after determining the adequate threshold. The second is manually to select the valid-bit of FFT result after finding the valid-field of data according to the bit-distribution of input data. We confirmed that the second is more effective compared with the first through the experimental result, and it will be implemented without so much modification of applied method in the condition of the limited resource of FPGA. The re-quantization is, however, carried out with 4-bit in the proposed second method for FFT result, and then the distortion of correlation result is also appeared. To fix this problem, the bit for re-quantization is extended to 8-bit. The proposed 8-bit selection-type is effectively verified so that the distortion of correlation result disappeared by applying to VCS in consequence of the simulation and correlation experiments.

• Korean Chemical Engineering Research
• /
• v.43 no.1
• /
• pp.1-8
• /
• 2005

In this study, $TiO_2$ powders were prepared by hydro-thermal synthesis with titanium tetra isopropoxide. The prepared $TiO_2$ and the commercial $TiO_2$(P-25, Degussa) were by impregnating $H_2PtCl_6$ solution or the leached solution from the waste catalytic converter of automobile. Modified photocatalysts were analyzed by ICP-AES, UV-DRS, XRD, SEM. And band-gap energy of modified photo-catalyst was found to decreased to 1.76eV and basic structure was changed upon modification by leached solution. Modified photocatalysts were coated on the wallpaper after using mixed solution with adhesive materials(PVC). And then to know the modified photo catalysts tested the reactivity and quantum efficiency in the mixed gas with NO as reactants in the photo catalytic reactor. In the gas phase, photo-catalytic activity of NO was the highest for modified P-25 catalysts(P-25(w)) that P-25(w) was impregnated by leached solution of wasted catalytic converter.