• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.3
• /
• pp.1512-1518
• /
• 2013

Polycarbonates (PCs) with six different end capping agents were synthesized from melt polymerization. Chemical structure of the synthesized PC was determined by FT-IR spectroscopy. The average molecular weight and distribution, glass transition and thermal degradation temperatures were determined by GPC, DSC and TGA. Average molecular weight changed with the chemical structure of end capping agent, and 4-tert-butylphenol was estimated as the optimum end capping agent. The average molecular weights of PCs decreased with the concentration of the agent, the number average molecular weight was observed as 20,000 - 30,000 when 0.05-0.15 mol% of 4-tert-butylphenol added in PCs. The melt viscosities and glass transition temperature of the PCs decreased with molecular weight. The change for adding method of the agent affected on both the molecular weight distribution and decrease in power law index.

• 한국생물공학회:학술대회논문집
• /
• 2003.10a
• /
• pp.621-625
• /
• 2003

In order to investigate the properties of aqueous fibroin solution, the molecular weight distribution of silk fibroin was determined by gel filtration chromatography. The molecular weights spreaded from 200 kDa to less than 20 kDa. The distribution of molecular weight was significantly affected when the pH of solubilization solution is less than 1. Distributions of fibroin solution stored at various condition were also investigated.

• Economic and Environmental Geology
• /
• v.32 no.3
• /
• pp.307-315
• /
• 1999

Four organic polymers were mixed with mothmorillonite. Two cationic polymers a hi로 molecular weight polyacrylamide (494C) and a low molecular weight polymer (587C).Two anionic polymers include a high molecular weight polymer (aerotil). Each clay supension series were allowed to stand for 24 hours and were centrifuged, and the clay plugs were washed and dried. The dried samples investigated by XRD, IR and CEC measurement. The suspended clay containing anionic polymers was not flocculated at any concentratuons of polymer. But the suspendions containing two cationic polymers were rapidly flocculated at almost all concentrations. the d(001) spacings of Na-montmorillonite after being with cationic polymer 587C show about 15$\AA$ suggesting the polymers may have entered the interlayer spaces. The polymer 494C-treated sample produced double peaks of about 12 and 15$\AA$ in XRD. It indicates that the high molecular weight polymer. And cationic polymer 494C may be adsorbed mainy on the outside surface of clay, and some polymers may peretrate into olny interlayers in the margin of montmorillonite particles because of its high molecular weught. CEC of polumer 587-treated sample was reduecd mmarkedly suggesting polymer blocks CEC sites. The d(001) spacings of Ca-montmorillonite after being treated with cationic polymers show about 15$\AA$ suggesting that the interlayer spaces have not been expanded. In the experiment using a dilute Ca-bearing solution, the suspended caly containinf anionic polymers was flocculated. The results indicate that the flocculation behavior of montmorillonite-polymer supension depends on not only polymer properties such as concentration, electric charge and molecular weight but also compositions of solvent.

• Korean Journal of Materials Research
• /
• v.29 no.12
• /
• pp.812-817
• /
• 2019

A zinc-air battery is one of most promising advanced batteries due to its high specific energy density, low cost, and environmental friendliness. However, zinc anodes in zinc-air batteries lead to several issues including self-discharge, corrosion reaction, and hydrogen evolution reaction (HER). In this paper, viscosity of electrolyte has been controlled to suppress the corrosion reaction, HER, and self-discharge behavior. Various viscosity average molecular weights of poly(acrylic acid) (PAA) are adopted to prepare the electrolyte. The evaporation of electrolytes is proportional to the increase in molecular weight. In addition, enhanced self-discharge behavior is obtained when the gelling agent with high molecular weight is used. In addition, the zinc-air cell assembled with lower viscosity average molecular weight of PAA (M_v ~ 450,000) delivers 510.85 mAh/g and 489.30 mAh/g of discharge capacity without storage and with 6 hr storage, respectively. Also, highest capacity retention (95.78 %) is obtained among studied materials.

• Macromolecular Research
• /
• v.13 no.2
• /
• pp.147-151
• /
• 2005

The main objective of this study was to modulate pH-sensitive polymers (poly($\beta-amino esters$)) by controlling their molecular weight during their synthesis. These pH-sensitive and biodegradable polymers were synthesized by Michael-type step polymerization. 1,4-Butane diol diacrylate was used as the unsaturated carbonyl compound and piperazine as the nucleophilic compound. Various molecular weight polymers were obtained by varying the mol ratio of piperazine/1,4-butane diol diacrylate. The synthesized polymers were characterized by $^{1}H-NMR$ and their molecular weights were measured by gel permeation chromatography(GPC). The dependence of the molecular weight on the mol ratio was evaluated by the titration method. Also, the pH dependent turbidity of the polymers was determined by UV-Vis spectrophotometry. This pH dependent property of the polymers could be very useful for preparing drug carriers that are sensitive to pH.

• Korean Chemical Engineering Research
• /
• v.56 no.3
• /
• pp.343-348
• /
• 2018

Each of the two polycarbonates (PC) of different molecular weights was blended with acrylonitrile-butadiene-styrene (ABS) under high-shear rate processing to afford PC/ABS. Sizes of ABS dispersed phases and mechanical properties of PC/ABS blends were investigated and high-shear rate processing of PC/ABS was carried out by changing screw speed and processing time. Prepared specimens were examined by scanning electron microscope (SEM) to observe morphology changes. Sizes of ABS dispersed phases in PC/ABS blends were observed to decrease gradually as screw speeds increased. Tensile strengths and elongations of specimens were investigated by universal testing method (UTM) to study the influence of molecular weight of PC exerting on PC/ABS blends. As a result, PC1/ABS blends (PC1: higher molecular weight PC) exhibited more strengthened properties than PC2/ABS (PC2: lower molecular weight PC). The tensile strength of PC1/ABS showed an increasing tendency when the screw speed increased, and the elongation did not show a significant decrease, but increased slightly with increasing shear time at a constant screw speed of 1000 rpm.

• Journal of Nutrition and Health
• /
• v.30 no.7
• /
• pp.751-769
• /
• 1997

This study was performed to investigate the effect of chitosan and NOCC from different sources and of different molecular weights on cadmium toxicity. Sprague-Dawley rats were blocked into 26 groups according to body weight, and were raised for 4 weeks. Cadmium chloride was given at the level of 0 or 400 ppm in diet. Various forms of chitosan and NOCC were given at the level of 0 or 4%(w/w) of diet. Cd toxicity was alleviated by various chitosan and NOCC supplements. However, the alleviating effects were different with fiber source(crab and shrimp), type(chitosan and NOCC), and molecular weight (low, medium, and high). Molecular weight had no significant effect. Compared with shrimp-source-fiber-fed groups, crab-source-fiber-fed groups showed lower Cd concentrations in blood and kidney, lower kidney metallothionein concentration, and lower liver and kidney MT-Cd contents. Compared with NOCC -fed groups, chitosan-fed groups showed lower intestine and liver Cd concentrations, lower liver and kidney MT concentrations and MT-Cd content, and higher fecal Cd excretion. Among cadmium-exposed group, low molecular weight shrimp chitosan group showed low Cd concentrations of liver and kidney, high fecal Cd excretions, and the lowest intestine and liver MT concentrations and liver MT-Cd content. In summary, a crab source fiber was more effective than shrimp source fiber, chitosan was more effective than NOCC, and the most effective one in alleviating Cd toxicity was low molecular weight shrimp chitosan.

• 한국생물공학회:학술대회논문집
• /
• 2003.10a
• /
• pp.634-638
• /
• 2003

For the investigation of the properties of aqueous fibroin solution, the variation of molecular weight by agregation of silk, morphology and difference of molecular weight at pI value was investigated. The distribution of molecular weight investigated using gel filtration chromatography and formation of aggregates were confirmed by using Field emission scanning electron microscope. The precipitation of fibroin solution at its pI value was compared by molecular weight distribution and the formation of fibroin aggregated were investigated. The aggregation kinetics were investigated at various condition.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.05b
• /
• pp.77-80
• /
• 2006

Graft copolymerized polycarboxylate(PC)-type superplasticizers(PCs) which have carboxylic acid with $\pi$ bond among the molecular structure and polyethyleneglycol methyl ether methacrylate(PMEM) were synthesized by free radical reaction and investigated the chemical structure, polymerization condition, and physical and chemical properties. Also, the effects of PCs in the dispersion, adsorption and hydration of cement were evaluated. As the molecular weight of graft chain decreases, the adsorption amount on cement particles increased. It was advantageous for the flow to reduce molar ratio, the lower the side bone molecular weight, and increase the molar ratio, the larger the side bone molecular weight. The hydration reaction speed was highly delayed at day 1, due to increase in molar ratio and reduction in side bone molecular weight, but it was recovered in the days after.

• Mass Spectrometry Letters
• /
• v.12 no.3
• /
• pp.81-84
• /
• 2021

Collagen, which accounts for one-third of human protein, is reduced due to human aging, and much attention is focused on making collagen into food to prevent such aging. Gel permeation chromatography with Reflective Index (RI) detection (GPC/RI) was chosen as the most suitable instrument to confirm molecular weight distribution, and we explored the use of this technique for analysis of collagen peptide molecular sizes and distributions. Data reliability was verified by matrix-assisted laser desorption/ionization coupled to time-of-flight (MALDI-TOF) mass spectrometric analysis. The data were considered meaningful for comparative analysis of molecular weight distribution patterns.