• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.4
• /
• pp.1005-1014
• /
• 2010

When reader collect tags, we found that they tend to get together to specific interface in Multi-Interface Multi-Channel 2.4GHz Active RFID system. To solve this problem, we designed the LP-Combind and AP-Balanced protocol for load distribution between interfaces, then verified its superiority of the performance through the simulation. There are three problems to implement designed protocols in hardware of firmware-level. first, tag selects randomly the channel of reader and reader need the method which can change the channel of tags. second, reader has the synchronization problem between reader and tag. third, reader has problem that MCU of reader have to operate simultaneously dual interface. To slove this problems, we designed the message and implemented method for tag channel change and the protocol in order to adjust synchronization between reader and tag, Therefore, we compared and analyzed the performance of protocols by experiment. If LP windows size is same, the performance of LP-Combined protocol and AP-Balanced protocol which lower collision probability by its load distribution is more outstanding than single interface protocol performance.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.1
• /
• pp.13-19
• /
• 2012

The use of RFID is recently increasing for the realization of Ubiquitous computing. Reducing the process time of tag recognition is crucial as RFID system has to recognize multiple objects in a short amount of time. In this manuscript, therefore, an effective scheme using multi-reader is suggested to improve processing speed for tag authentication in RFID system. According to the result of performance analysis, the processing time required for tag authentication was drastically reduced in multi-reader environment than it was in a single reader. Consequently, the use of the suggested scheme cuts down on the processing time while identifying tags by using multi-reader and bring about overall performnce improvement of RFID system.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.9
• /
• pp.4133-4137
• /
• 2011

Reliable Multi-Reader RFID identification is one of issues in Multi-Reader RFID realization program in recent. And the Multi-Reader RFID reader has difficulty to obtain reliable data in data capture layer. The reason is that unreliable readings such as a false positive reading and a false negative reading and missed readings can happen by reader collision problems, noise, or the mobility of tagged objects. We introduce performance metrics to solve these reader problems. We propose three solutions the Minimum Overlapped Read Zone (MORZ) with Received Signal Strength Indicator (RSSI), the Spatial-Temporal Division Access (STDA) method, and double bigger size of tags attached on the object. To show the improvement of the proposed methods, we calculate tag's successful read rates in a smart office, which consists of Multi-Reader RFID systems.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.667-668
• /
• 2006

Radio Frequency Identification (RFID) is an automatic identification method, relying on storing and remotely retrieving data using devices called RFID tags or transponders. RFID systems is coming into increasing use in industry and logistics. This paper discuses implementation of multi-protocol RFID reader SoC. The SoC contains multi-protocol RFID RFID reader, CPU, UART, memory.

• The Journal of Korea Robotics Society
• /
• v.4 no.1
• /
• pp.1-9
• /
• 2009

Radio Frequency Identification (RFID) is an automatic identification method. Information such as identification, logistics history, and specification of products are written and stored into the memory of RFID tags (that is, transponders), and retrieved through RF communication between RFID reader device and RFID tags. RFID systems have been applied to many fields of transportation, industry, logistics, environment, etc in order to improve business efficiency and reduce maintenance cost as well. Recently, some research results are announced in which RFID devices are combined with other sensors for mobile robot localization. In this paper, design of multi-protocol baseband for RFID reader device is proposed, and the baseband modem is implemented into SoC (System On a Chip). The baseband modem SoC for multi-protocol RFID reader is composed of several IP (Intellectual Property) blocks such as multi-protocol blocks, CPU, UART(Universal Asynchronous Receiver and Transmitter), memory, etc. As a result, the SoC implemented with FPGA(Field Programmable Gate Array) is applied to real product. It is shown that the size of RFID Reader module designed with the FPGA becomes smaller, and the SoC chip price for the same function becomes cheap. In addition, operation performance could be the same or better than that of the product with no SoC applied.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.3
• /
• pp.1367-1371
• /
• 2013

The RFID market seems to grow mostly in the logistics and distribution areas. The areas and small sized work places requires multi-steps based system. In the environment, the performance of RFID READER is the most important factor. If RFID READER fails to operate frequency well, it will be difficult to apply RFID technology to work places and manage multi-readers used in a narrow place. This work reveals that making possible multiple readers environment and reporting the state of the entire upgrade are of significant in terms of the system's functions. This thesis studied RFID reader platform with self-diagnosis function.

• The Journal of the Korea Contents Association
• /
• v.14 no.3
• /
• pp.52-58
• /
• 2014

Point of care testing (POCT) is could be easily and economically performed and was widely used. In particular, the test items using immune chromatographic method has been conveniently used. But when an error occurs, we should reaffirmed the test results, but we could not reaffirm because the test line is disappeared as the time pass, and the test results are different between laboratory workers. Therefore, we developed multi-strip reader which can store images for the test results and can interpretate the test results automatically. Then we evaluated newly developed multi-strip reader for urine pregnancy test, the test results of the multi-strip reader was 100% matched with the previously results. Our newly developed multi-strip reader was convenient and economic, and will be widely used in many laboratories.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.4
• /
• pp.46-55
• /
• 2009

In RFID field, when the neighboring readers try to occupy the same or adjacent channel simultaneously, there exists reader-to-reader interference; it calls reader collision. From the reader collision, the tags cannot response correctly query from the reader. Reader anti-collision schemes have been developed, and particularly, the Listen-Before-Talk(LBT) scheme is proposed to avoid reader collision in ETSI in multi channel environment. However, in ETSI, there is a drawback that the reader collision does not decreases effectively because the reader selects randomly a channel without considering the channel environment and readers try to occupy the channel concurrently. In this paper, we propose a algorithm based on LBT scheme considering multi channel environment as well as made up for the drawbacks of LBT The proposed algorithm applies random backoff, the collision avoidance mechanism. And it can reduce delay because of our proposed estimation mechanism Simulation using OPNET shows that the proposed algorithm achieves higher superiority than that of the simple algorithms in sparse and dense reader mode.

• Proceedings of the KIEE Conference
• /
• 2005.10b
• /
• pp.67-69
• /
• 2005

This paper is for the design and implementation of the reader which can recognize the tag of the band that we do not become internationally the standardization. RFID Reader uses the software and specifies the class of UHF band. And then, it can recognize UHF band tags controlling the hardware.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.05a
• /
• pp.95-98
• /
• 2009

RFID(Radio Frequency IDentification) technology is an automatic identification method using radio frequencies between RFID reader which collects the informatin and tag which transmits the information. RFID technology develops passive RFID which transmit the only ID to active RFID which transmit the additional information such as sensing information. there is ISO/IEC 18000-7 as typical standard of active RFID. it is single channel system of 433.92MHz and has limitation of collection of a number of tags. to overcome limitation of collection of many tags, we propose the new 2.4GHz active RFID technology which can use the multi-channel. if reader has multi-interface and uses another channel in each, reader could fast collect the tags. but, if a reader which has many interfaces collects tags through the specific interface, the performance may not improve any more comparing with a reader using single interface. in this paper, we show the fast collection through design and implementation of protocol for load balancing between interfaces in multi-interface RFID reader.