• The Journal of the Convergence on Culture Technology
• /
• v.4 no.4
• /
• pp.419-427
• /
• 2018

This paper designs and develops auto-tuning temperature controller with multi-channel, which controller with multi-channel could control a number of control system simultaneously. This controller has multi-channel input and output. And a number of control algorithms run in this controller simultaneously and independently. Firstly we present design method of controller with multi-channel. Secondly we design electrical circuit of sensor input, controller output and power control for temperature control board. And finally we design data protocol for serial communication to monitor control state and present verification of temperature controller with muiti-channel through field experiment.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.951-956
• /
• 2007

This paper suggests a high-speed control method which is suitable for multi-joint robots using a real-time stand-alone controller for general-purpose. The fast processing controller consists of a PCI Interface Board and 2-axe PWM drivers. The PCI Interface Board consists of 32-channel PWM output ports, 32-channel Encoder Counters, 32-channel A/D Converters and 48-channel Digital I/O ports, and all the I/O data transmissions are completed within 1ms. And The 2-axe PWM driver can be redesigned easily in order to embed in each link. Experimental implementations show that the high-speed control method can be used for the real-time control which is essential to controlling of multi-body robots such as humanoid robots. Especially, it is efficient for realizing the model-based motion control in demand of much calculation time by the high I/O communication speed.

• The Journal of the Acoustical Society of Korea
• /
• v.38 no.1
• /
• pp.9-22
• /
• 2019

In this paper, we propose a method that can be applied to the efficient implementation of multi-channel active noise controller. Since the normalized MFxLMS (Modified Filtered-x Least Mean Square) algorithm for the multi-channel active noise control requires a large amount of computation, the difficulty has lied in implementing the algorithm using a low-cost MCU (Microcontoller Unit). We implement the multi-channel active noise controller efficiently by optimizing the software based on the features of the MCU. By maximizing the usage of single-cycle MAC (Multiply- Accumulate) operations and minimizing move operations of the delay memory, we can achieve more than 3 times the performance in the aspect of computational optimization, and by parellel processing using the auxillary processor included in the MCU, we can also obtain more than 4 times the performance. In addition, the usage of additional parts can be minimized by maximizing the usage of the peripherals embedded in the MCU.

• Journal of Biomedical Engineering Research
• /
• v.36 no.5
• /
• pp.221-227
• /
• 2015

In this study, Multi-Array Electrodes (MAE) and Programmable Multi-channel Electrical Stimulator (PMES) were implemented for firing Trigger Points (TPs) of the patient with Myofascial Pain Syndrome (MPS). MAE has 25 Ag/AgCl electrodes arranged in the form of array ($5{\times}5$) fabricated with flexible pad, which are applicable to be easy-attached to curved specific region of the human body. PMES consisted of 25 channels. Each channel was to generate various electric stimulus patterns (ESPs) by changing the mono-phasic or bi-phasic of ESP, On/Off duration of ESP, the interval between ESP, and amplitude of ESP. PMES hardware was composed of Host PC, Stimulation Pattern Editing Program (SPEP), and Multi-channel Electrical Stimulator (MES). Experiments were performed using MAE and PMES as the following. First experiment was performed to evaluate the function for each channel of Sub- Micro Controller Unit (SMCU) in MES. Second experiment was conducted on whether ESP applied from each channel of SMCU in PMES was focused to the electrode set to the ground, after applying ESP being output from each channel of SMCU in PMES to MAE.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.4
• /
• pp.784-789
• /
• 2007

This paper presents an implementation of a new type of architecture to improve an overflow problem on the network buffer. Each receiver channel of network system stores the message in its own buffer. If some receiver channel receives many messages, buffer overflow problem may occur for the channel. This paper proposes a network controller that implements a receiver channel with shared-memory to save all of the received messages from the every incomming channels. The proposed architecture is applied to ARINC-429, a real-time control network for commercial avionics system. For verifying performance of the architecture, ARINC-429 controller is designed using a SOPC platform, designed by Verilog and targeted to Xilinx Virtex-4 with a built-in PPC405 core.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1897-1900
• /
• 2004

In recent years, a lot of industrial equipments have serial communication channel such as FieldBus (CAN, Profibus, etc.) or Ethernet that provides real time communication between industrial equipments. Theses applications include gantry crane, robot, chip mounter, etc.. In this paper, we discuss the synchronization technique for networked multi-motor systems where controllers (commercial servo amps) are distributed and interconnected by CAN (Controller Area Networks). We first describe the equivalent model for the individual servo-amp and motor using the frequency response. We design the $H{\infty}$ controller for motion synchronization. Finally, the synchronization technique using the equivalent model and the $H{\infty}$ controller is verified by the simulation and the experiment.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.35 no.6
• /
• pp.209-216
• /
• 1986

This paper describes the design of multi channel data acquisiton system for industrial process automation. The prototype hardware assembly consists of Z-80A microprocessor, 10-bit A/D converter with 16-channel analog multiplexor and related interface circuitry. The first order lag filter, which can be implemented without any particular computational problem has implemented in software, and the simulation results are shown. The protype system can communicate with a central processor through RS-232C, and can be used either as an intelligent stand-alone controller or as a satellite controller which can be monitored and controlled by a central processor. The singal conditioners for various temperature and humidity sensors are designed and experimental results are shown.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.4
• /
• pp.33-41
• /
• 2014

This paper presents an effective memory access method for a high-speed data transfer on mobile systems using a direct memory access controller that considers the characteristics of a multi-port memory controller. The direct memory access controller has an integrated channel management function to control multiple direct memory access channels. The channels are physically separated and operate independently from each other. Experimental results show that the proposed direct memory access method improves the transfer performance by up to 72% and 69% on read and write transfer cycles, respectively. The total number of transfer cycles of the proposed method is 63% less than in a commercial method under 4-channel access.

• ETRI Journal
• /
• v.45 no.4
• /
• pp.615-626
• /
• 2023

Under limited transmission conditions, many factors affect the efficiency of video transmission. During the flight of an unmanned aerial vehicle (UAV), frequent network switching often occurs, and the channel transmission condition changes rapidly, resulting in low-video transmission efficiency. This paper presents an efficient video coding flow for UAVs working in the 5G nonstandalone network and proposes two bit controllers, including time and spatial bit controllers, in the flow. When the environment fluctuates significantly, the time bit controller adjusts the depth of the recursive codec to reduce the error propagation caused by excessive network inference. The spatial bit controller combines the spatial bit mask with the channel quality multiplier to adjust the bit allocation in space to allocate resources better and improve the efficiency of information carrying. In the spatial bit controller, a flexible mini graph is proposed to compute the channel quality multiplier. In this study, two bit controllers with end-to-end codec were combined, thereby constructing an efficient video coding flow. Many experiments have been performed in various environments. Concerning the multi-scale structural similarity index and peak signal-to-noise ratio, the performance of the coding flow is close to that of H.265 in the low bits per pixel area. With an increase in bits per pixel, the saturation bottleneck of the coding flow is at the same level as that of H.264.

• The Journal of the Acoustical Society of Korea
• /
• v.34 no.1
• /
• pp.46-51
• /
• 2015

In fields of controlling acoustical noises, the overall adaptive control system is nonlinear due to the loudspeaker, amplifiers, converters, and microphones, etc. and the performance of noise control is decreased by the extent of nonlinearities, so an adaptive control system compensating nonlinear distortions is needed. In this paper, a new multi-channel adaptive noise controller was proposed, which was combined with the adaptive compensator to effectively linearize nonlinear distortions in the overall adaptive control system. Through computer simulations, the proposed adaptive compensator could linearize the nonlinear distortions and the proposed noise controller had better capability of controlling the noises than the conventional LMS controller.