• 한국정밀공학회지
• /
• 제18권2호
• /
• pp.79-83
• /
• 2001

A verification of multi-spindles drilling NC data is presented. The drilling of multi-spindles can offer productivity over three times as fast as that of single spindle. The most important things in machining tube sheet are precision of hole position and machining time. The drilling of multi-spindles has difficulties in controlling many motors to drive spindles and assign a correspondent number to each spindles. Multi-spindles drilling has different codes from CNC milling ; many subroutines, assignment of spindle, and so on. The conventional method, which inspects the NC code of the drilling, is to drill holes on a thin plate or tube sheet previously. The method results in low productivity because it consumed long machining time and welding for correction. This paper describes details of multi-spindles NC code and operation of multi-spindles drilling machine. A verification software of the multi-spindles drilling NC code is developed on the details.

• 한국정밀공학회지
• /
• 제10권1호
• /
• pp.52-61
• /
• 1993

Developed in this research is a CAM system for 5-axis NC Machining of sculptured surfaces. We identify problems in generating 5-axis NC data and propose methods of overcoming them. Issues discussed in this paper are: kinematic modelling of NC machines; determination of cutter position (location and orientation); check of machine work-range; linear trajectory plann- ing ; calculation of feedrate number. The proposed system has been implemented in FORTRAN77 on the Personal IRIS EWS, and it also constitutes a module of the CAD/CAM system 'CASSET' developed in KIST CAD/CAM lab.

• 한국산업정보학회논문지
• /
• 제9권1호
• /
• pp.7-16
• /
• 2004

효율적인 최종 NC코드를 만들어내기 위해서 공구경로는 효과적인 방법으로 결정되어 져야한다. 이는 3축 CNC 공작기계상에서 자유형상의 벽을 가진 자유곡면을 가공할 때 특히 중요하다. 많은 CAD/CAM 시스템들은 자유곡면가공을 위한 NC코드 생성 시 직선 보간을 이용한다. 그러나 이 방법은 가공된 바닥 표면의 매끄러움과 가공시간, 그리고 CL파일 사이즈를 줄이기 위해서 보정되어야 한다. 곡선 가공이 이러한 문제들을 줄이기 위한 해결책이 될 수 있다. 단일화된 황삭과 정삭 알고리즘과 공구경로가 그래픽으로 시뮬레이션 되었다. 본 연구에서는 자유곡면 바닥을 가진 파켓을 3축 CNC 공작기계를 이용하여 일반적인 파켓 밀링을 위한 직선 보간과 직선+아크를 혼합한 보간을 위한 NC 공구경로 데이터를 만들기 위한 3D 격자 항행 알고리즘을 개발하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.551-554
• /
• 2002

The paper discusses new approach for machining operation simulation using enhanced Z map algorithm. To extract the required geometric information from NC code, suggested algorithm uses supersampling method to enhance the efficiency of a simulation process. By executing redundant Boolean operations in a grid cell and averaging down calculated data, presented algorithm can accurately represent material removal volume though tool swept volume is negligibly small. Supersampling method is the most common form of antialiasing and usually used with polygon mesh rendering in computer graphics. The key advantage of enhanced Z map model is that the data structure is same with conventional Z map model, though it can acquire higher accuracy and reliability with same or lower computation time. By simulating machining operation efficiently, this system can be used to improve the reliability and efficiency of NC machining process as well as the quality of the final product.

• 한국CDE학회논문집
• /
• 제4권2호
• /
• pp.110-120
• /
• 1999

In general, turbine blades are usually machined on 5-axis NC machine. The 5-axis machining of sculptured surface offers many advantages over 3-axis machining including the faster material-removal rates and an improved surface finish. But it is difficult and time-consuming to generated interference-free 5-axis tool path. This paper describes research on the algorithm for generation of an interference-free 5-axis NC data for machining turbine blades. The approach, using the section profile derived from the intersection of cutting planes with a triangulated-surface approximation, includes (1) CL-data generation by detecting an interference-free heel angle (2) the calculation method for finding a adaptive feed-rate value, and (3) the inverse kinematics depending on the structure of 5-axis machine.

• International Journal of Precision Engineering and Manufacturing
• /
• 제2권3호
• /
• pp.69-78
• /
• 2001

This paper presents a process and operation planning system and an NC code post-processor for effective machining of press dies for production of cars. Based on the machining feature, major parts of press dies are categorized into 15 groups and a standard process plan is defined for each group. The standard process plan consists of a series of processes where a process is defined as a group of operations that can be done with one setup. Details such as cutting tools, cutting conditions, and tool paths are decided at the operation planning stage. At the final stage of process and operation planning, the NC code post-processor adjusts feedrates along the tool path to reduce machining time while maintaining the quality. The adjustment rule is selected based on the machining load estimated by virtual machining.

• 대한기계학회논문집
• /
• 제18권11호
• /
• pp.3091-3097
• /
• 1994

An expert system for NC part programming of NC lathe (ESPP-1) is developed as a part of Computer-Adied Manufacturing system. Conventional computer-assisted part programming system essentially requires an NC part programmer who is an expert in NC part programming. But the developed ESSP-1 can allow an inexperienced person to make an excellent NC data for the NC Lathe without any problem, since the system has a knowledge base composed of EIA and ISO NC code, feed rate, spindle speed, machining coordinates selection, and tool selection etc., which were directly evoked from some skilled NC part programmers, and referenced some machining handbooks. This paper discusses the algorithm of the expert system for NC part programming of the NC lathe (ESPP-1) and the performance comparisons between the developed expert system and the conventional system.

• 한국정밀공학회지
• /
• 제10권1호
• /
• pp.108-113
• /
• 1993

This paper proposes a method for obtaining blend surfaces between machining data of surfaces. This blending algorithm consists of trangation, detection, tracing, construction of blend surfaces, and generation of machining data for the blend surfaces. Inpus of the algorithm are a blend radius and machining data of surfaces to be blended. CL data as well as CC data can be applied as an input machining data of the algorithm.

• 산업공학
• /
• 제21권4호
• /
• pp.411-417
• /
• 2008

An impeller is a type of high-speed rotor that is used to compress or transfer fluid under high-speed and pressure at high temperatures. The impeller is composed of an axial hub and several blades attached along the hub. The weight and shape of an impeller must be balanced, because their imbalances can cause noise and vibration, which can lead to the breakage of the impeller blades during operation. Thus, the hub and blades of an impeller are commonly machined in a 5-axis NC machine to obtain qualified surfaces. The impeller machining strategy or process plan can not be easily obtained due to the complex, overlapped and twisted shapes of impeller blades. Skillful machining process planners may generate appropriate machining strategies based on their experiences and floor data. However, in practice most shop floor data for the impeller machining is not well-structured such that it does not effectively provide a process planner with information for machining strategies and/or process plans. This paper reports the development of a case-based machining strategy support system (CBMS) that employs case-based reasoning to obtain the machining strategy of an impeller by using the existing machining strategies of the shop floor. The CBMS generates impeller machining strategies through a stepwise reasoning process considering the similarity features between the blade shapes and machining regions. A case study is provided to demonstrate that CBMS can generate useful machining strategies facilitating process planners. The developed system can simulate the tool paths of impeller machining and runs on the web.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.51-54
• /
• 2002

This paper deals with an implementation of NUBS interpolator and presents the process of its integration into PC-NC. For more accurate feed, NURBS algorithm is improved. Also, Evaluation of real time NURBS interpolator is provided to verify fred accuracy and geometrical accuracy of NURBS curve. NURBS machining of fee surface is simulated on the real time NC simulator so that machining time is compared to that of linear path machining.