• Journal of Auto-vehicle Safety Association
• /
• v.8 no.4
• /
• pp.12-17
• /
• 2016

NHTSA (National Highway Traffic Safety Administration) has offered consumers the vehicle safety information on their car since 1978. NHTSA believes that they contribute auto makers to develop safer vehicle for customers, which will result in even lower numbers of deaths and injuries resulting from motor vehicle crashes. NHTSA has been studied why people are still dying in frontal test despite of the use of many restraints system and they understand that current test does not reflect real world crash data such as oblique and corner impact test. As a result, NHTSA announced that a new test method will be introduced to use of enhanced biofidelic dummy and new crash avoidance technology evaluation from 2019. New and refined injury criteria will be applied to Head / Neck / Chest / Lower Leg. BrIC(Brain Injury Criterion)value in NHTSA test results using THOR dummy from 2014 to 2015 was average 0.91 and 1.24 in driver and passenger dummies. IIHS 64kph SOF test is the most likely to new frontal oblique test in an aspect of offset impact which is being studied by NHTSA. In this paper, we focused on head injury, especially brain injury - BrIC and conducted IIHS 64kph SOF (Small Offset Front) test with Hybrid III dummy to evaluate the injury for BrIC. Based on the test results, these data can be predicted BrIC level and US NCAP rating with current vehicle.

• Journal of Auto-vehicle Safety Association
• /
• v.5 no.2
• /
• pp.39-44
• /
• 2013

Motor vehicle crashes are the leading cause (70%) of children injury and fatality. 98% of Children under the age of 9 who came to emergency room with a traffic accident are not seated in CRS. Reduction in mortality when using CRS (NHTSA study), 71% for infants of 1-2 years old, 54% for 3-6 years old and 7-12 years old. It is very important and essential to use CRS for child passenger safety. But in Korean market, the CRS fitment rate is relatively low (20~40%). For European market, at the start of 2013, Euro NCAP started to check how easy it is to install the most common seats. And US market, NHTSA is planning a new consumer information program of CRS fitment for near future. This study examines CRS installation performance of 3 vehicles which are produced by GM Korea and 21 CRS which are based on sales volume in Korean market. Purpose of this study is to identify both vehicle and CRS design that causes bad interaction for CRS installation.

• Journal of the korean Society of Automotive Engineers
• /
• v.18 no.4
• /
• pp.18-26
• /
• 1996

• The tire
• /
• s.80
• /
• pp.31-40
• /
• 1979

1976년에 실시예정이었던 미국의 타이어 품질등급제(UTQGS)가 79년 3월부터 실시될 것 같다. UTQGS란 ①Tread 마모성능, ②Traction 성능, ③고속성능 등에 대해서 각각의 품질등급을 타이어에 표시할 것을 의무화시켜, 사용자가 타이어를 구입하는 경우 선택하기 쉽도록 편의를 도모하기 위한 목적이다. 이것은 당초 76년 1월부터 실시될 예정이었으나, 주로 Tread 마모성능의 테스트 방법과 표시방법을 둘러싸고 미국 High Way 안전청(NHTSA)과 미국의 타이어 메이커 간에 소송까지 벌어져서 그 실시가 지연되었다. 제1심에서는 타이어 메이커 측이 패소하여 타이어 메이커는 즉시 상소하였으나, 기간 재판의 진행 상태로 보아 UTQGS가 실시될 정망이 농후해졌다. 그러나 NHTSA는 내년부터 실시되는 동법령중에서 Radial을 제외하고 있어서, 세계의 주류로 되어 있는 Radial 타이어를 제외 하는 것은 「UTQGS의 효과를 반감하는 것」이라는 비판이 나오고 있다.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.9 no.2
• /
• pp.99-106
• /
• 2001

NHTSA has been conducting biomechanical studies to reduce inujuries sustained sustained during automotive collision. Furthermore, NHTSA added the regulation to the FMVSS 201, limiting the equivalent HIC(Head Injury Criterion) value under 1000. In the presont work, a methodology was developed for the optimum design of the A-pillar trim with rib-structures. The design variables for the rib-strucrures were the transverse spacing, the longitudinal spacing, and the thickness. The required sets of the design varibles were decided based on the design of experiments. The head impact simulations were carried out using the LS-DYNA3D, and the HIC(d) values were computed using the resulrs of the head impact simulation. The objective function was constructed using the response surface methed (RSM). When the obtained optimum values were not inside the region of interest, the design proceduers were repeated by changing the region of interest. Finally, an A-pillar trim with rib-structures, which resulred in HIC(d) value under 850 for 15 mph head-trim impact, was developed.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.20 no.5
• /
• pp.81-87
• /
• 2012

New car assessment program (NCAP) originated from USNCAP in 1979 has been implemented in several countries or markets, for instance USA, Europe, Korea, Japan, China and Australia. NCAP has contributed greatly to reduce accidental tolls. But recently, NCAP performance has no distinction between cars because manufacturer have been continuously developed to improve NCAP performance. Therefore, NHTSA announced new USNCAP protocol becoming effective from MY2011. NHTSA had carried out many NCAP tests based on the new test protocol and announced these test results. In this paper, USNCAP test results were reviewed by statistical method. This review was focused on passenger cars and frontal crash test results in order to investigate effect of changes in new NCAP protocol. There are two key changes, one is sited female dummy in passenger position, the other is enlarged to 4 scoring body regions in each dummy. Results of this review were summarized as followings. Performance in Passenger (12.5%) is lower than Driver's (50%) for number of 5 star vehicle. Neck injury criterion is dominant to NCAP star rating for both dummies in the mean sense. For standard deviation, chest deflection is showed largest value in driver dummy but neck injury criterion is showed for passenger's. DKAB and PKAB were equipped 28.1% and 6.2%, respectively. Consequently, the countermeasure for new USNCAP frontal crash test is essential to control well dummy kinematics with some safety features including KAB to reduce neck injuries.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.19 no.6
• /
• pp.30-36
• /
• 2011

The current test methods are insufficient to evaluate and ensure the safety and reliability of vehicle system for all possible dynamic situation including the worst case such as rollover, spin-out and so on. Although the known NHTSA Sine with dwell steering maneuvers are applied for the vehicle performance assessment, they aren't enough to estimate other possible worst case scenarios. Therefore, it is crucial for us to verify the various worst cases including the existing severe steering maneuvers. This paper includes useful worst case based upon the existing worst case scenarios mentioned above and worst case evaluation for vehicle dynamic controller in simulation basis and UCC HILS. The only human steering angle is selected as a design parameter here and optimized to maximize the index function to be expressed in terms of both yaw rate and side slip angle. The obtained scenarios were enough to generate the worst case to meet NHTSA worst case definition. It has been concluded that the new procedure in this paper is adequate to create other feasible worst case scenarios for a vehicle dynamic control system.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.16 no.6
• /
• pp.1-9
• /
• 2008

The current test methods are insufficient to evaluate and ensure the safety and reliability of vehicle system for all possible dynamic situation including the worst case such as rollover, spin-out and so on. Although the known NHTSA J-turn and Fish-hook steering maneuvers are applied for the vehicle performance assessment, they aren't enough to estimate other possible worst case scenarios. Therefore, it is crucial for us to verify the various worst cases including the existing severe steering maneuvers. This paper includes the procedure to search for other useful worst case based upon the existing worst case scenarios mentioned above and its application in simulation basis. The only human steering angle is selected as a design parameter here and optimized to maximize the index function to be expressed in terms of either roll angle or yaw rate. The obtained scenarios were enough to generate the worst case to meet NHTSA worst case definition (ex.2-inch wheel lift). Additionally, as an application, the worst case steering maneuver is acquired for the vehicle to operate with a simple ESP system. It has been concluded that the new procedure in this paper is adequate to create other feasible worst case scenarios for a vehicle system both with an intelligent safety control system and without it.

• The tire
• /
• s.90
• /
• pp.13-21
• /
• 1980

Radial 타이어의 타이어 품질등급제 (UTQGS: Uniform Tire Quality Grading Standard)가 80년 4월1일 발효되었다. 다음 일람표는 미국운수성(DOT) 국유 High Way 교통안전국(NHTSA)에 80년 4월1일까지 등록된 각 타이어 메이커 및 자가 Brand 품(Private Brand)업자로부터 제출된 등급표시이다. Grades 표시내용에 대해서는 지난 5~6월호에 주석해 놓았으므로 참조바랍니다.<편집자주>

• Transactions of the Korean Society of Automotive Engineers
• /
• v.23 no.4
• /
• pp.420-427
• /
• 2015

This paper statistically reviewed for the USNCAP frontal crash test results carried out by NHTSA. Vehicle samples were selected on total 20 vehicles which were included on 15 vehicles for MPV&SUV and 5 Pickup. The results was summarized as followings. The performance for the driver was better than the passenger's in the average sense. There exist distinctions between the driver and the passenger on the USNCAP front test procedure, for example dummy size, seating position and airbag style. Therefore these differences originated in the statistical results. Main effect was Neck injury for crash performance on both dummies on the average value. Root cause of neck injury was different for each dummy, ie, the driver caused from Nte & Ntf, but the passenger did absolutely Nte mode. Reliability evaluated from the standard deviation was highly dependent upon chest injury on the driver and neck injury on the passenger. Restraint system was also summarized.