• Textile Coloration and Finishing
• /
• v.7 no.4
• /
• pp.45-53
• /
• 1995

Natural rubber(NR)-polyacrylamide(PAAm) graft copolymers(GP)(toluene soluble GP : TSGP, water dispersible GP : WDGP) have been synthesized as coupling agents by pre-emulsification methods based on "inverse emulsion graft polymerization" technique. The polymerization was carried out at $65^{\circ}C$ using Azobisisobytyro nitrile(AIBN) as an initiator in the inverse emulsion system formed by inxing NR toluene solution with inverse emulsion of awueous AAm solution emulsified with $Tween^{\#}$ 80 in toluene. The mechanism of inverse emulsion graft copolymerization was studied on AAm conversion, % grafting, grafting efficiency, NR conversion, production ratio of TSGP and amount of GP(sum of TSGP and WDGP). The reaction has been confirmed through use of optical microscope to proceed via adsorption of emulsifier colloid particles onto the stretched NR molecule. From the analysis of the effects of various polymerization conditions on the grafting, it has also been found that the present rection system can easily yield high(over 90%) grafting efficiency and AAm conversion and relatively high(over 80%) NR conversion.onversion.

• Journal of the Korea Society of Computer and Information
• /
• v.23 no.12
• /
• pp.163-170
• /
• 2018

This study was conducted to investigate the effects of noise from dental clinics on workers and to establish a reduction plan. The noise generated by the treatment instrument(Ultrasonic scaler, Hand piece, 3-way syringe, Suction, Compressor) was measured in order to determine the characteristics(level, frequency) of the noise during medical treatment(Oral prophylaxis, Conservation treatment, Prosthesis treatment, Implant Scaling, Tooth eliminating). We also assessed the noise levels in dental clinic using evaluation indicators such as NR-curves and NRN. The results of the analysis showed that the noise generated during the treatment was 85dB(A) ~ 70dB(A) and that the high frequency component was dominant, which would affect the workers working at the dental clinic. The NR-curve analysis showed NR-67 to NR-83 and the high frequency components of 4kHz to 8kHz were predominant and far exceeded noise levels in the workplace. To minimize the noise damage of workers and to provide high quality medical service, it is necessary to establish countermeasures such as wearing a soundproof and periodic hearing tests.

• Journal of Genetic Medicine
• /
• v.19 no.2
• /
• pp.115-119
• /
• 2022

The 46,XX testicular disorder of sex development (DSD) is a rare condition in which 46,XX individuals develop testicular differentiation and virilization. Translocation of the sex-determining region Y (SRY) onto the X chromosome is the main cause of 46,XX testicular DSD, whereas dysregulation between pro-testis and pro-ovarian genes can induce SRY-negative 46,XX testicular DSD. Nuclear receptor subfamily 5 group A member 1 (NR5A1), a nuclear receptor transcription factor, plays an essential role in gonadal development in XY and XX embryos. Herein, we report the first Korean case of SRY-negative 46,XX testicular DSD with a heterozygous NR5A1 p.Arg92Trp variant. The patient presented with a small penis, bifid scrotum, and bilateral undescended testes. Whole exome sequencing revealed a heterozygous missense variant (c.274C>T) of NR5A1. Our case highlights that NR5A1 gene variants need to be considered important causative factors of SRY-negative non-syndromic 46,XX testicular DSD.

• Proceedings of the Korean Fiber Society Conference
• /
• 2003.10a
• /
• pp.98-98
• /
• 2003

Mechanical Properties of NR/PET fiber composite were studied. First, PET fiber was grafted under EB irradiation. The mechanical properties of composite were improved with the addition of grafted fiber into NR.

• Elastomers and Composites
• /
• v.29 no.3
• /
• pp.213-225
• /
• 1994

The Purpose of this dissertation is to study the preparation technique and physical properties of expanded rubber. The respective samples of NR, NBR and the standard compounds of EPDM rubber were prepared by mixing plasticizer DOP and LCR in various ratio. And their vulcanization characteristics, physical properties and foaming states were studied. Vulcanization characteristics were investigated using cure curve that had been obtained from Oscillating Disk Rheometer study, and the microscopic photographs of foaming states were obtained using electron microscope. The vulcanization characteristics of the samples, DOP 30phr and LCR 30phr, were found to be suitable. The tests, like hardness test and resilience, tensile test on the physical properties of each sample showed that plasticizing efficiencies of DOP and LCR were almost the same. Oil resistance test exhibited DOP was better than LCR and compression set test showed LCR was excellent plasticizer. The foaming states of NR, EPDM compounds were uniform, but those of NBR compounds were not uniform. Consequently vulcanization characteristics, physical properties and foaming states of all the samples satisfied the SAE requirements.

• Toxicological Research
• /
• v.8 no.1
• /
• pp.119-129
• /
• 1992

Present study was carried out to investigate the cytotoxicity of cadmium, chromium and mercury on cultured rat fibroblasts. The colorimetric assays of neutral red (NR) and tetrazolium MTT, the measurement of total content of protein and electron microscopic studies were performed on the fibroblasts cultured in the media containing various concentrations of cadmium, chromium and mercury. The results are as follows' 1. In cadmium-treated group, the NR and MTT values were dose-dependent increase. The NR90, NR50, MTT90 and MTT50 values of cadmium were 0.2mM, 19.5mM 1.0mM and 60.0mM, respectively.

• Macromolecular Research
• /
• v.9 no.1
• /
• pp.37-44
• /
• 2001

A premixing effect for the properties of carbon black-filled rubber compounds was investigated using biblends of natural rubber (NR), styrene-butadiene rubber (SBR), and butadiene rubber (BR). Degree of mixing of the biblends was controlled by preblending time of 0.0, 2.5, and 5.0 min. Mooney viscosities of the compounds decreased by increasing the preblending time. Of three carbon black-filled compounds of NR/SBR, NR/BR, and SBR/BR compounds, only the SBR/BR blends showed a specific cure characteristics depending on the preblending time. For the bound rubber composition, the NR content was higher than SBR and BR. The difference in the rubber composition ratio of the bound rubber became smaller with increasing the preblending time. Physical properties of the vulcanizates such as hardness, modulus, tensile property, abrasion loss, and tans were also compared. Differences in properties of the compounds were discussed with miscibility of the dissimilar rubbers and degree of mixing.

• Toxicological Research
• /
• v.7 no.1
• /
• pp.13-20
• /
• 1991

To investigate the cytotoxicity and genotoxicity of the DNA alkylating agnet, mitomycin C and the antimetabolite, 5-Fluorouracil (5-FU) in cultured rat fibroblasts, the colorimetric assay of netural red (NR) for cytotoxicity and for genotoxicity, sister chromatid exchange (SCE) assay and the measurement of the rate of DNA synthesis were performed in cells cultured in media containing various concentrations of mitomycin C and 5-FU. The uptake ability of neutral red decreased does-dependently. NR90 and NR50 values of mitomycin C were 1.49 nM and 6.87mM and 5-FU were 38.4mM AND 284.4Mm respectively.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.11a
• /
• pp.519-524
• /
• 2007

In this study, NR GT 101 (water-to-water Ground source heat pump unit) and NR GT 102 (water-to-air Ground source heat pump unit) related with ISO and ARI guideline were introduced and researched. GSHPs testing was performed by NR GT 101, 102 and analyzed performance factors. Test result, Energy Efficiency Ratio and Coefficient of performance factor of GSHPs were relatively low at an average value rather than Certification.

• The tire
• /
• s.65
• /
• pp.10-17
• /
• 1976

아민계열화방지제(이하 아민이라고 한다)를 첨가한 천연고무 순고무가유물에 대해서 고온으로 반복대신장피로를 주어서 응력변화, 피로수명에 주는 열화방지제의 영향을 조사하였다. 아민첨가시료에 대해서 고온으로 반복 신장피로를 가하면 무첨가시료와 동양, 화학응력 연화가 출현했다. 아민첨가시료의 화학응력연화의 임계온도는 NR-DPG로 110℃, NR-MBTS로 110℃, NR-TT로 130℃이며 가교구조의 내열성에 일치하며 무첨가시료의 임계온도보다도 10~30℃높아졌다. 아민첨가시료의 반복신장피로수명은 60℃로 극대화 되어 (NR-DCP만이 40℃이었으나) 무첨가시료의 피로수명은 40℃에서 극대화됐다. 전보에서 보고한 피로수명과 변형률과의 관계식(F=A(εb-ε)n)은 100℃에서 아민첨가시료에 대해서만이 성립하고 무첨가시료에 대해선 성립되지 않았다. 이들의 결과는 아민을 고무에 첨가함으로써 고무의 열산화반응이 억제되었음에 원인하고 있다고 생각된다.