• Korean Institute of Interior Design Journal
• /
• v.20 no.1
• /
• pp.24-32
• /
• 2011

The study was to grasp features of new material applicable to housing space in the sustainable side by analyzing materialistic features of new material and features of sustainable material with sustainable new material. Through analysis on sustainable new material, the study deducted the below conclusion. First, through the precedent studies, the characteristics of sustainable materials have been classified into eight categories : friendly healthiness, non-toxicity, comfortableness, naturality, recycling, harmlessness of environment, separate collection, reusability. After the criteria have been brought up from new material applicable to housing space in the sustainable. Second, in materialistic Characteristics of new material, 'New Process' was mainly applied. There was no any new material applied to 'new raw material'. Therefore, it is thought that it is necessary to study on development of perfectly new material and to study on new material to apply material used in other fields to finishing material of dwelling space. Third, in Characteristics of sustainable material, 'Re-serviceability' appeared most and 'Non-toxicity' and 'Recycling' appeared in the next. 'Friendly Healthiness' and 'Separate collection' appeared only one on the other side. Therefore, it is judged that it is necessary to develop and study new material including health components considering user's health, function for health increase and function to grope comfort for humans. Finally, after researching and analysis the criteria by recently presented the new material, it has been concluded that the standard can be used as the criteria of new material for the possibility of application in housing space. On the basis of the study, the author will carry out analysis on sustainable new material minutely and utilize it as basic data to suggest a standard of sustainable new material applicable to dwelling space in the future.

• Korean Institute of Interior Design Journal
• /
• v.21 no.3
• /
• pp.22-30
• /
• 2012

Nowadays the issue of environmental pollution and ecological destruction is not a simple issue but an important issue to be continuously considered. It is deemed that a study for recycled new materials is immediately required and this study is to analyze features and processing methods of new materials which can be used to interior space. We found the recycled new materials used for space through researching various web sits. And then we analyzed what the base materials are and classified that base materials are whether natural or artificial of the recycled materials. We classified processing methods of the recycled new materials after researching general processing methods. The result of this study would be an important material to the research and development of new finishing materials with consideration of environment and to the research for a guideline of applicable new materials. The results of this study are as follows : First, we could classify widely 2 categories into natural material and artificial material and then 10 subcategories into metal, glass, wood, rubber, stone, plastic, leather or fabric, ceramic, concrete and so on, and analyzed that which material is mostly used and whether it is single material or multiple material. In order to analyze the feature of processing method. Second, we could classify into 4 categories such as junction, surface process, molding, and insert, and found out which processing method is applied based on objects of research. Third, as an analysis result of the recycled new material feature, in order to develop various new materials, it is required to study on combination and application of 2 materials or more rather than single material. Four, as a analysis result of the processing method feature, I would like to suggest that development and application of various processing methods are required. Especially, it is necessary to grope for a way to develop new functional materials for interior space through a systemic research and analysis of processing method of other fields. Furthermore, a way to reuse recycled new materials should be considered in a stage of selection and application of processing method.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2006.11a
• /
• pp.38-38
• /
• 2006

• Proceedings of the Korean Vacuum Society Conference
• /
• 2009.02a
• /
• pp.173.1-173.1
• /
• 2009

• Bulletin of the Korean Chemical Society
• /
• v.27 no.2
• /
• pp.187-188
• /
• 2006

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.05a
• /
• pp.601-604
• /
• 1999

Electroluminescence(EL) devices based on organic thin films have attracted lots of interests in large-area light-emitting display. Recently, many EL researcher have interested a new emissive organic material. In this study, light-emitting organic electroluminescent devices were fabricated using Langmuir-Blodgett(LB) technique with new emissive organic material. This new emissive organic material were synthesis by our teams and we called PECCP [poly(3,6-N-2ethylhexyl carbazoly cyanoterephthalidene)] which has strong electron donor group and electron acceptor group in main chain repeat unit. This material has good solubility in common organic solvent such as chloroform. THF, etc. and has a good stability in air. In here, the new emissive material is applied to Langmuir-Blodgett(LB) method because our new material has a good stability in air. Optimum conditions of film deposition were examined by a surface pressure-area( $\pi$ -A) isotherms with various factors. The LB film were deposited on a indium Tin Oxide(ITO) glass. We were investigated by measuring current-voltage(I-V) characteristics. Also we were measured the UV/visible absorption at about 410nm and PL spectrum at about 530nm. We are attempt to the electroluminescence device properties of the new emissive material by Langmuir-Blodgett(LB) technique.

• Korean Institute of Interior Design Journal
• /
• v.22 no.5
• /
• pp.367-375
• /
• 2013

Using the 'New material' concept has recently been introduced into the natural characteristics. In the course of such a, Janine M. Benyus has proposed to mimic the characteristics of natural ecosystems to mention the concept of Biomimicry. Process made engineered using technical elements for representing the material properties of Biomimicry such will be acting importantly, This study intends to analyze how new materials applied to 'Biomimicry' characteristics are processed in space. The results were as follows : 1) Processing methods of new materials resulted as 'Forming', 'Surface treatment', 'Bonding', 'Inserting'. These four were divided and analyzed into 'Form', 'System', 'Adaptation'. As a result of this analysis, such significances were shown as 'Forming/Surface treatment/Bonding' in 'Form', 'Bonding' in 'System' and 'Adaptation'. 2) 'Bonding' applied to 'System' of new material can be recycled to be combined with other materials through the existing adhesive material, and present as a solution of 'Sustainable development'. 3) 'Bonding' applied to 'Adaptation' of new material is to impart the ability to react to the environment through the joint, but is characteristic, at this time, using digital and other field technology. It appeared primarily that it can be known to meet the social trends and convergence between fields. Thus, as the finish that are friendly to the environment from the interior design, the results of the study are expected to be utilized in the study of new materials guidelines.

• Proceedings of the Korean Institute of Resources Recycling Conference
• /
• 2003.10a
• /
• pp.129-133
• /
• 2003

• Proceedings of the Korean Society of Life Science Conference
• /
• 2001.09a
• /
• pp.127-127
• /
• 2001

• International Journal of Costume and Fashion
• /
• v.7 no.1
• /
• pp.22-31
• /
• 2007

The systematic study of the future began with curiosity and imagination about the future; a unique trait of human mental effort-and this seems to be based on the idea that the future can be different depending on current choices or effort. In this sense, it would be seemly to encourage more interest and academic study on the progress of future fashion. In this study, we examine recent changes of fashion material; e.g. that which science and technology have more impact and importance in futuristic fashion since the 1990�s. The period analysed is from the1990's to the present and related data from recent fashion collections and fashion books has also been included The current prediction of the future is largely based on what was formed between the 19th Century and the 20th Century which has persisted until now and has been influenced by the view that science will play a bigger role in the future. This is especially reflected in fashion which chiefly represents material culture. New materials used for fashion are strong and permanently durable, in addition to being very light, thin, flexible, hygienic, ecological and comfortable to wear-almost like a second skin. These fashionable new materials roughly function in two different ways according to external and internal characteristics. First, they cause external change. Second, they exemplify or allow new functions. Examples of external change are the use of silver color, achromatic color, metallic material, smooth-to-the-touch shiny material and the use of luminous material. Examples of the extended function of clothing through the use of new materials are the use of conducting thread, the use of special material for blocking & opening and the use of material which changes colors as the surroundings change. These days, the use of new material which changes its appearance is a novelty unique to the fashion world but we also expect to witness the debut of diverse new materials with extended inner functions.