• 대한기계학회논문집A
• /
• 제25권1호
• /
• pp.115-126
• /
• 2001

In this paper, through a series of comparative experiments, effects of two different cure processing methods, cocure and precure, on the mechanical properties of honeycomb core materials for aircraft applications are considered. Mass of moisture accumulated into the closed cells of the sandwich panel specimen from the measured mass of moisture diffused to the full saturation state into the elements(skin, adhesive layer, Nomex honeycomb), consisting the honeycomb sandwich specimen has been calculated. Water reservoir of 70$\^{C}$ was used to have specimens absorb moisture to see the influence of moisture absorbed into sandwich panel on its mechanical properties. For the repair condition holding for 2 hours at 177$\^{C}$(350℉) temperature, a pressure due to the vapor expansion in each cell of the sandwich panel, which may result in the local separation of the interface between laminated skin and the surface of the honeycomb, has been estimated by vapor pressure-temperature relation from the thermodynamic steam table and compared to the pressure from the ideal gas state equation. The bonding strengths of the laminated skins on the flat surface of the Nomex honeycomb have been compared by the flatwise tension test and climbing drum peel test performed at room temperature for dry, wet and wet-repair specimens, respectively.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2004년도 춘계학술발표대회 논문집
• /
• pp.1-4
• /
• 2004

In this paper we developed Composite-Smart-Structures(CSS) using sandwich structure composed of Glass/Epoxy laminates and Nomex honeycomb and microstrip antenna. Transmission/reflection theory shows that antenna performances can be improved due to multiple reflection by Glass/Epoxy facesheet, and honeycomb is used for air gap between antenna and facesheet. Stacked radiating patches are used for the wideband. Facesheet and honeycomb thicknesses are selected considering both wideband and high gain. Measured electrical performances show that CSS has wide bandwidth over $10\%$ and higher gain by 3.5dBi than initially designed antenna, and no doubt it has excellent mechanical performances by sandwich effect given by composite laminates and honeycomb core. The CSS concept can be extended to give a useful guide for manufacturers of structural body panels as well as antenna designers, promising innovative future communication technology.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2000년도 추계학술발표대회 논문집
• /
• pp.195-198
• /
• 2000

Microstrip antenna for SAR applications is designed with microwave composite laminates and Nomex honeycomb cores, which becomes an aircraft's structural panel. This study demonstrated fabrication, design procedures and structural and electrical performances of complex antenna system presented. For validating structural rigidity, 3-point bending test is performed, and simulation results for the complex antenna array are compared with measurements for its electrical performance. The results show that this antenna system can be applied in dual polarized synthetic aperture radar and has a good flexural stiffness with comparison of previous sandwich constructions.

• Composites Research
• /
• 제16권4호
• /
• pp.59-65
• /
• 2003

샌드위치 구조물의 응용된 형태인 스마트 스킨 구조물을 ABAQUS로 유탄요소 해석하였다. 심재로 쓰이는 하니컴은 일반적으로 두께 방향 강성 및 전단 강성만 제작회사에 의하여 제공된다. 이를 바탕으로 하니컴 재료의 물성을 추정하여 다른 방향의 제공되지 않는 물성을 계산하였고, 이를 유탄요소 해석시 물성 자료로 적용하였다. 또한, 스마트 스킨 구조물의 좌굴 및 3점 굽힘 거동을 유한요소 해석하였으며, 기존의 실험결과 및 이론값과 비교 분석하였다. 비교적 결과가 잘 일치하였다. 본 연구를 통하여서 하니컴의 물성을 상용 패키지에 적용하는 방법 및 타당한 근거를 제시하였고, 이 결과를 바탕으로 스마트 스킨 구조물을 상용패키지로 유한요소 해석시 지침을 제시할 수 있다

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2002년도 춘계학술발표대회 논문집
• /
• pp.195-198
• /
• 2002

Two types of conformal load-bearing antenna structure (CLAS) were designed with microwave composite laminates and Nomex honeycomb cores, to give both structural rigidity and good electrical performance. One is 4$\times$8 array for Synthetic Aperture Radar(SAR) system and the other is $5\times2$ array for wireless LAN system. Design was based on wide bandwidth, high polarization purity, low loss and good structural rigidity. We studied the design, fabrication and structural/electrical performances of the antenna structures. The flexural behavior was observed under a 3-point bending test, an impact test, and a buckling test. Electrical measurements were in good agreement with simulation results and these complex antenna structures have good flexural characteristics. The design of this antenna structure is extended to give a useful guide for sandwich panel manufacturers as well as antenna designers.

• 한국의류산업학회지
• /
• 제21권5호
• /
• pp.606-617
• /
• 2019

The present study newly developed a firefighters' protective jacket and pants using a Nomex honeycomb structured layer (HPC) in cases of being exposed to flashover or flameover. This study evaluated the protective and comfort functions of an HPC compared to the current KFI firefighters' protective clothing (FPC). The results are as follows. First, thermal protective performance (TPP) of fabric layers was 2.75 times greater for HPC than FPC at $125kW/m^2$. Second, the predicted second and third degree burn areas were smaller for HPC than FPC when using a flame manikin. Third, thermal insulation using a thermal manikin was 0.2 clo greater for HPC than FPC. Fourth, there were no marked differences in maximal performance, mobility, and microclimate temperature/humidity between FPC and HPC through human wear trials. The thermal insulation of HPC was higher than that of FPC; however, any negative effect of HPC thermal insulation on the comfort functions for firefighters was not found. In conclusion, the newly-developed HPC provided more protection in reducing burn injuries from $125kW/m^2$, while no negative impact on maximal performance, mobility and thermal comfort functions of firefighters, which is appropriate for quick-evasive tactics at the flashover, flameover or back draft fires.

• 산업기술연구
• /
• 제31권A호
• /
• pp.33-38
• /
• 2011

In an express tilting train, side wall insulating the noise from the exterior sound source consists of two parts. One is the layered composite panel including aluminum honeycomb, glass wool and nomex honeycomb. The other is the double glazed window. In this study, sound insulation performance of the two parts is investigated by mass law and experiment. Based on ASTM E2249-02, the intensity sound transmission loss (TL) is measured on the specimens of the two parts. Mass law deviation (MLD) is considered in order to compare the sound insulation performance in respect of weight. Contribution of each part to the sound insulation is analyzed and the sound insulation strategy for the interior noise reduction is investigated.

• 대한기계학회논문집A
• /
• 제34권12호
• /
• pp.1931-1936
• /
• 2010

한국형 틸팅열차에는 고속화와 경량화를 위하여 허니콤 복합재가 처음으로 사용된다. 틸팅열차의 측벽은 탄소섬유강화 에폭시층과 접착된 알미늄 허니콤 및 노멕스 허니콤 판재를 주 요소로, 유리면이 적층된 복합 적층재이다. 본 연구에서는 ASTM E2249-02에 근거하여 알미늄 및 노멕스 허니콤 복합 적층재의 층별 인텐시티 투과손실을 측정한다. 질량법칙편차를 이용하여 허니콤 복합재의 중량 대비 차음 성능을 평가하고, 차음 측면에서 알미늄 허니콤 복합재가 기존의 주름강판을 대체할 수 있는지의 가능성을 검토한다. 본 연구를 통하여 얻은 허니콤 복합 적층재의 차음성능 자료는 향후 틸팅 열차의 실내 소음 대책 수립에 활용될 것이다.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2001년도 춘계학술발표대회 논문집
• /
• pp.74-77
• /
• 2001

The impact response and damage of CLAS panel was investigated experimentally. The facesheet material used was RO4003 woven-glass hydrocarbon/ceramic and the core material was Nomex honeycomb with a cell size of 3.2mm and a density of 96 kg/$\textrm{m}^{3}$. The shield plane used was RO4003 and 2024-T3 aluminum. Static indentation and impact test was conducted to characterize the type and extent of the damage observed in two CLAS panels, and the performance of antenna used in a wireless LAN system. Correlation of peak contact force, residual indentation and the delamination area shows impact damage of the panel with an aluminum shield plane is larger than that of the panel with RO4003 shield plane, although tile former is more penetration resistant. The damage was observed by naked eye, ultrasonic inspection and cross sectioning. The shape and size of delamination was estimated by ultrasonic inspection, and the area of delamination linearly increases as impact energy increases. The performance of impact damaged antenna was estimated by measuring return loss and radiation pattern.

• Composites Research
• /
• 제14권6호
• /
• pp.1-8
• /
• 2001

본 연구에서는 샌드위치 패널 구성 요소인 면재와 심재를 변화시켜 4종류의 샌드위치 패널을 제작하였다. 그리고 제작된 샌드위치 패널의 기계적 특성과 철도차량 개발시 중요한 요인으로 작용하는 음향투과 특성 그리고 화재에서의 안정성을 확인하기 위하여 난연특성 실험을 통하여 샌드위치 패널의 특성을 검토하고자 하였다. 샌드위치 패널의 기계적 특성은 알루미늄 면재 + 알루미늄 하니컴 심재로 구성된 샌드위치 패널이 면방향 인장강도와 변방향 압축강도 특성에서 우수하며 알루미늄 면재 + 노멕스 하니컴 심재로 구성된 샌드위치 패널은 면방향 압축강도와 굽힘 강도가 우수한 것으로 확인되었다. 알루미늄 면재 + PMI 포옴 심재로 구성된 샌드위치 패널은 심재의 전단강도 및 면재의 굽힙강도가 우수하였다. 난연성 시험에서는 phenol 수지 면재와 2종의 외국 면재는 모든 시험 결과에서 유사한 견과를 확인하였다.