• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2009년도 춘계 학술논문 발표대회 학계
• /
• pp.235-238
• /
• 2009

The study of our investigating and analyzing through experiments the performance on nonslip techniques, which has been nationally applied and represented, showed the following results. 1) In wearing shoes condition, regardless the shape of the surface and surface condition of the object, it satisfied the performance standard in cleaned and dried condition and the pulverulent body mixed liquid dispersed moisture condition. However, for the case of the non-slip agent treatment, not likely as the non-slip tape treatment case, the effect was not approved as it shows almost the same CSR as none treatment. 2) In bare foot condition, it satisfied the performance standard in most of the objects except for the Ceramic tile (A), Ceramic tile (B), pure and soapy water dispersed condition.

• 한국환경과학회지
• /
• 제6권6호
• /
• pp.645-658
• /
• 1997

A study on ventilation design using the spreadsheet model is carried out to propose means of available design. A sample of complex ventilation system In the non-standard condition Is used to illustrate thins spreadsheet model. In developing the spreadsheet model, this study has attempted to it general by using computional equations and design parameters that can be readily applied to any spreadsheet software. Also, most design data is contained in the spreadsheet template. This template provides the same design information as the ACGIH worksheet, and operates Quickly and emclenuy, and is fiexible enough to use under different conditions. This spreadsheet model allows the ventilation engineer to design quickly and accurately the ventilation system, without spending too much effort In the design process. By storing on computer and diskette, the design data computed finally can be used as a permanent record of specific ventilation system, and because of finally to be able to design over and over again while making only slight changes to the Input data, the spreadsheet model is used availably to accomplish the design optimazation by redesign and troubleshooting by review from field measurements. Also, the spreadsheet model is available for designing ventilation system under different condition or evaluating existing system or design drawing, because changes In the layout or formulae can be readily made to fit the needs of the designer.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1997년도 가을 학술발표회 논문집
• /
• pp.729-736
• /
• 1997

This paper gives the information of field concrete placed under raining condition. Experimental factors in this study are concrete strength, standard deviation and coefficient of variation. The results are as follows: 1. The strength of field concrete placed under raining condition is not largely dependent on the raining condition. 2. But, the quality of concrete is very critical.

• 산업경영시스템학회지
• /
• 제31권2호
• /
• pp.71-79
• /
• 2008

The Certification system will be able to expect that effect of marketing and the corporate image rising, if the certification body guarantees the contents of certification against industrial technical advance and safety, environment and efficiency, quality when it is suitable in the standard which is provided. The certification system where the private organization operates but recently on the legal notarization outside is disordering and the trust regarding the certification falls and the objective and gist of origin are damaged. But recently the trust of certification has fallen and the objective and gist of origin are damaged. Because the non-government certifications are disordering. Also the damage of the consumers majority occurs but it is insufficient the investigation analysis against the present condition regarding a non-government certification system and the operation actual condition. So it is necessary the actual condition where the countermeasure against hereupon is urgent. In this study, we present the operation direction of efficient against non-government certification system through investigation and the analysis.

• 한국항공우주학회지
• /
• 제50권4호
• /
• pp.233-240
• /
• 2022

스마트무장은 종말 유도조종을 통해 정밀타격 임무를 수행하는 초소형 유도무기로 미래 전장환경의 신무기체계이다. 하지만 크기로 인한 구조적 제한으로 인해 압전구동 방식의 조종날개를 이용해 제어를 수행하기 때문에 기동력이 작아 유도범위가 제한적이다. 본 논문에서는 스마트무장의 효과도를 높이기 위한 비 표준조건 사격제원 산출 알고리즘을 제안한다. 제안된 알고리즘은 획득한 전장환경 정보를 이용해 표준조건에서의 사격제원을 보정해 비 표준조건의 사격제원을 산출한다. 다양한 조건에서의 수치 시뮬레이션을 통해 제안된 알고리즘의 성능을 검증하였다.

• 펄프종이기술
• /
• 제46권6호
• /
• pp.16-25
• /
• 2014

This study was investigated in optimum condition of pulping of ramie and the mechanical properties of non-woven fabric for the performance of ramie/cotton panty liner. The result of pulping condition on ramie was most suitable for type I (mixed NaOH with $Na_2CO_3$ in 30%:70%). The sample (I) was showed yield value of 68.2% and the best fibrillation and lignin removal rate. The non-woven fabrics of ramie/cotton were made in range of ramie content of 0, 15 and 30%. As ramie content increased, so were increased in air permeability, compressive strength and compression recovery rate. But surface roughness and compressional energy were decreased. Therefore, the non-woven fabrics of ramie/cotton are very suitable in hygienic goods for female panty liner. The ramie panty liner showed a little decrease in absorption and strength, as increasing the amount of ramie. But the performance of ramie panty liner was appeared beyond standard values used by usual panty liner.

• 한국환경농학회지
• /
• 제27권1호
• /
• pp.10-17
• /
• 2008

The objective of this study was to estimate the pollutant loads from paddy fields by cultivation practices using a non-point-sources models. One of them is CREAMS-PADDY model that was developed considering the water balance and mass balance of paddy fields. The CREAMS-PADDY model was applied to provide basic data to reduce runoff loadings under various scenarios such as various water management control and various fertilizer condition. The model was verified against T-N, T-P and runoff flow data collected during cropping periods at 2000. The model results agreed well with the measured data in verification. The results showed that the model could be used for estimating the runoff loadings from irrigated paddy fields by cultivation practices was possible. Comparison of simulated the standard height and the sluice management of T-N and T-P runoff loadings from paddy fields were +32.4%, +10.3% in 10 mm below the standard height, -29.2%, -35.9% in 20 mm above the standard height, 52.6%, 59.0% in 40 mm above the standard height, respectively. Comparison of simulated the standard fertilizer and the fertilizer control of T-N and T-P runoff loadings from paddy fields were -1.3%, -21.7%in reduction of conventional fertilizer 30%, -1.0%, -12.5% in reduction of standard fertilizer 30%, respectively. Therefore, reducing nonpoint-sources nutrient loading by reducing fertilization may not work well in the range of normal paddy rice farming practices, and instead it could be achieved by reducing surface drainage outflow.

• 한국임상수의학회지
• /
• 제24권2호
• /
• pp.119-124
• /
• 2007

Milk components analysis was carried out milk yield(MY), milk fat(MF), milk protein(MP), milk urea nitrogen(MUN), milk solid(MS), day of non-pregnant condition(DNPC), and days of primipara(DPRI) involved. Dairy farms were divided high, middle and low groups according to the standard records for milk components. Examination records were divided by farm, parity, year, season and month, the number of samples were 28,957. MUN concentration was below 12 mg and when the MPP was below 3.0%, the days of non-pregnant condition were $94{\pm}10.77$ days but concentration of MUN was under 12 mg and when MPP was above 3.2%, longer period of non-pregnant condtion of $181.3{\pm}9.25$ was noted. The days of gestation of the first calving cow was $495.9{\pm}9.04$ days when the concentration of MUN was below 12mg/dl and MPP was under 3.0%. If the concentration of MUN was 12 mg/dl and when the MPP was over 3.2%, the days of gestation were $511.0{\pm}8.36$ days. It was believed that the concentrations of MPP and MUN have significant effects on the days of non-pregnant condition and the days of gestation. Determination of MY, MF, MS, and MUN was Milkoscan $4,000{\sim}5,000$ Serier(FOSS Electric Co., Copenhagen, Denmark). MUN standard concentration was 12-18(mg/dl) similar to blood urea nitrogen(BUN). Mutual relationship of milk components(MF, SCC, MY, DNPC, MS) and MUN concentration was low in regression analysis.

• 설비공학논문집
• /
• 제7권4호
• /
• pp.681-693
• /
• 1995

A new set of capillary tube selection charts for R-22 is proposed. The set of charts takes into account of the roughness effect on the mass flow rate. For this purpose, a set of numerical model is developed and a series of experiments is conducted to verify the numerical model. A numerical model is used to calculated the mass flow rate for several sets of tube diameter, length, inlet pressures and degree of subcooling. The outlet of the tube is controlled to be at critical condition. The experimental flow rate is compared with calculated values. The calculated values are consistently less than the experimental ones except for the flow rate range below 40kg/hr. The deviation is within 10---. Based on the nunmerical model and results of experiments, the set of capillary tube selection charts for R-22 is constructed. The set of charts consists of standard capillary tube chart(L=2030mm, d=1.63mm, ${\varepsilon}=2.5{\mu}m$), non -standard flow factor(${\phi}_1$) chart, and non-standard roughness factor(${\phi}_2$) chart. The mass flow rate, flow factor, and the roughness factor are defined respectively as; $\dot{m}={\phi}_1{\phi}_2\dot{m}_{standard}\\{\phi}_1=\frac{\dot{m}(L,\;d,\;\varepsilon_{standard})}{\dot{m}_{standard}(L_{standard},\;d_{standard},\;{\varepsilon}_{standard})}\\{\phi}_2=\frac{\dot{m}(L_{standard},\;d_{standard},\;{\varepsilon})}{\dot{m}_{standard}(L_{standard},\;d_{standard},\;{\varepsilon}_{standard})}$.

• Food Science and Biotechnology
• /
• 제18권1호
• /
• pp.60-65
• /
• 2009

Near infrared reflectance spectroscopy (NIRS) was used as a rapid and non-destructive method to determine the protein content in intact and ground seeds of pea (Pisum sativum L.) germplasms grown in Korea. A total of 115 samples were scanned in the reflectance mode of a scanning monochromator at intact seed and flour condition, and the reference values for the protein content was measured by auto-Kjeldahl system. In the developed ground and intact NIRS equations for analysis of protein, the most accurate equation were obtained at 2, 8, 6, 1 math treatment conditions with standard normal variate and detrend scatter correction method and entire spectrum (400-2,500 nm) by using modified partial least squares regression (n=78). External validation (n=34) of these NIRS equations showed significant correlation between reference values and NIRS estimated values based on the standard error of prediction (SEP), $R^2$, and the ratio of standard deviation of reference data to SEP. Therefore, these ground and intact NIRS equations can be applicable and reliable for determination of protein content in pea seeds, and non-destructive NIRS method could be used as a mass analysis technique for selection of high protein pea in breeding program and for quality control in food industry.