• Journal of Welding and Joining
• /
• v.12 no.1
• /
• pp.94-101
• /
• 1994

In this study, plasma spraying has been used to produce $TiO_2$ polycrystalline coatings from $TiO_2$ powders. The physical and chemical properties of plasma sprayed $TiO_2$ coatings depend greatly on plasma spraying conditions. The electrical resistivity, oxygen concentration, photocurrent and crystal structure of plasma sprayed $TiO_2$ coating has been studied. The results are as follows: 1. The oxygen loss and electrical conductivity of $TiO_2$ plasma sprayed coatings increased by low pressure and high amount of auxiliary gas, hydrogen in plasma spraying. 2. Oxygen loss increase electrical conductivity, and decrease photocurrent of $TiO_2$ plasma sprayed coatings. 3. Photocurrent of $TiO_2$ plasma sprayed coatings manufactured in atmospheric pressure is higher than that of low pressure.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.11a
• /
• pp.163-163
• /
• 2003

TiN barrier막 위에 metal organic chemical deposition(MOCVD)법으로 RuO$_2$ 를 증착시 TiN막 표면을 세정처리하지 않을 경우 RuO$_2$의 핵생성이 어렵고, 그로 인해 RuO$_2$ 연속막이 형성되기 힘들다. 그러므로 RuO$_2$의 핵생성을 향상시키기 위해 TiN막에 대한 전처리 세정이 필수적이다. TiN막의 전처리 세정방법으로 ECR plasma 세정법을 사용하였으며, $O_2$ plasma와 H$_2$ plasma 그리고 Ai plasma를 이용해 각각의 exposure time을 변화시키며 전처리 세정을 실시하였다. H$_2$ plasma와Ar plasma의 exposure time이 증가됨에 따라 RuO$_2$의 핵생성이 향상되었다. 본 연구에서는 scanning electron microscopy(SEM), Auger electron emission spectrometry(AES), Atomic Force Microscope(AFM), X-ray diffraction (XRD) 등의 분석을 통해 TiN막 표면에 대한 ECR plasma 전처리 세정 이 RuO$_2$의 핵생성과 연속막 성장에 미치는 효과에 대해 조사하였다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.802-805
• /
• 2003

The ion-induced secondary electron emission coefficient ${\gamma}$ for MgO thin film with $O_{2}$ plasma treatment has been investigated by ${\gamma}$-FIB (focused ion beam) system. The MgO thin film deposited from sintered material with $O_2$ plasma treatment is found to have higher ${\gamma}$ than that without $O_{2}$ plasma treatment. The energy of $Ne^{+}$ ions used has been ranged from 100eV to 200eV throughout this experiment. It is found that the highest secondary electron emission coefficient ${\gamma}$ has been achieved for 10 minutes of $O_{2}$ plasma treatment.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.04a
• /
• pp.67-68
• /
• 2008

A simple bi-layer structure of organic light emitting diode (OLED) was used to study the characteristics of anode preparation. Indium tin oxide (ITO) anode surface treatment of OLEDs was performed to get the optimum condition for the ITO anode. The ITO surface was treated by $O_2$ or $O_2$ / Ar mixed gas plasma with different processing time. The electrical characteristics of OLED were improved by plasma treatment. The operating voltage of OLED with $O_2$ or $O_2$/Ar mixed gas plasma treated anodes decreases from 8.2 to 3.4 V and 3.2V, respectively. The $O_2$ /Ar mixed gas plasma treatment results in better electrical property.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.07a
• /
• pp.863-865
• /
• 2001

In this study, RuO$_2$thin films were etched in inductively coupled $O_2$plasma. Etching characteristics of RuO$_2$thin films including etch rate and selectivity were evaluated as a function of rf power in $O_2$plasma and gas mixing ratio in $O_2$/Ar plasma. In $O_2$ plasma, the etch rate of RuO$_2$thin film increases as rf power increases. In $O_2$/Ar plasma, the etch rate of RuO$_2$thin film increases up to 10% Ar, but decrease with furthermore increasing Ar mixing ratio. The enhanced etch rate can be obtained with increasing rf power and small addition of Ar gas.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.525-528
• /
• 2004

The ion-induced secondary electron emission coefficient ${\gamma}$ and work function for MgO thin film with $O_2$ plasma treatment has been investigated by ${\gamma}$ -FIB (focused ion beam) system. The MgO thin film deposited from sintered material with $O_2$ plasma treatment is found to have higher ${\gamma}$ and lower work function than those without $O_2$ plasma treatment. The energy of various ions used has been ranged from 100eV to 200eV throughout this experiment. It is found that the highest secondary electron emission coefficient ${\gamma}$ has been achieved for 10 minutes of $O_2$ plasma treatment under RF power of 50W.

• Journal of the Semiconductor & Display Technology
• /
• v.18 no.2
• /
• pp.98-102
• /
• 2019

Direct plasma-enhanced atomic layer deposition (PEALD) are widely used for $SiO_2$ and SiON thin film process in current semiconductor industry. However, this exhibits poor step coverage for three-dimensional device structure due directionality of plasma species as well as plasma damage on the substrate. In this study, to overcome this issue, low temperature (< $300^{\circ}C$) $SiO_2$ and SiON thin film processes were studied using inductively coupled plasma (ICP) type remote PEALD with various reactant gases such as $O_2$, $H_2O$, $N_2$ and $NH_3$. It was confirmed that the interfacial properties such as fixed charge density and charge trapping behavior of thin films were considerably improved by hydrogen species in $H_2O$ and $NH_3$ plasma compared to the films grown with $O_2$ and $N_2$ plasma. Furthermore, the leakage current density of the thin films was suppressed for same reason.

• Journal of the Korean Ceramic Society
• /
• v.48 no.1
• /
• pp.69-73
• /
• 2011

A $ZrO_2$ thin film as a corrosion protective layer was deposited on Zircaloy-4 (Z-4) clad material using $N_2O$ as a reactive gas by RF reactive magnetron sputtering at room temperature. The Z-4 substrate was located in plasma or out of plasma during the $ZrO_2$ deposition process to investigate mechanical and corrosive properties for the plasma immersion. Tetragonal and monoclinic phases were existed in $ZrO_2$ thin film immersed in plasma. We observed that a grain size of the $ZrO_2$ thin film immersed in plasma state is larger than that of the $ZrO_2$ thin film out of plasma state. In addition, the corrosive property of the $ZrO_2$ thin films in the plasma was characterized using the weight gains of Z-4 after the corrosion test. Compared with the $ZrO_2$ thin film immersed out of plasma, the weight gains of $ZrO_2$ thin film immersed in plasma were larger. These results indicate that the $ZrO_2$ film with the tetragonal phase in the $ZrO_2$ can protect the Z-4 from corrosive phenomena.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.22 no.8
• /
• pp.645-649
• /
• 2009

We investigated the effects of a high density $O_2$ plasma treatment on the structural and electrical properties of Ga-, B- codoped ZnO (GZOB) films. The GZOB films were deposited on polymer substrate without substrate heating by DC magnetron sputtering. Prior to the GZOB film growth, we treated a polymer substrate with highly dense inductively coupled oxygen plasma. The optical transmittance of the GZOB film, about 80 %, was maintained regardless of the plasma pre-treatment. The resistivity of the GZOB film on PC substrate decreased from 9.08 ${\times}$ $10^{-3}$ ${\Omega}-cm$ without an $O_2$ plasma pre-treatment to 2.12 ${\times}$ $10^{-3}$ ${\Omega}-cm$ with an $O_2$ plasma pre-treatment. And PES substrate decreased from 1.14 ${\times}$ $10^{-2}$ ${\Omega}-cm$ without an $O_2$ plasma pre-treatment to 6.13 ${\times}$ $10^{-3}$ ${\Omega}-cm$ with an $O_2$ plasma pre-treatment.

• Journal of the Korean institute of surface engineering
• /
• v.44 no.3
• /
• pp.89-94
• /
• 2011

In this study, the photocurrent characteristics of plasma sprayed $TiO_2$ coatings have been investigated according to additive transition metal (Fe, Mn, Nb powder) and heat treatment conditions. The plasma sprayed $TiO_2$ coatings by heat treatment at $400^{\circ}C$ and 90 min had the higher photocurrent at ultraviolet light, no photocurrent at visible light. The photocurrent of plasma sprayed $TiO_2$ coatings added by Fe, Mn, Nb (named by plasma sprayed $TiO_2$ composite coatings) was lower than that of plasma sprayed $TiO_2$ coatings at ultraviolet light, as was low in intensity ratio of XRD(101)/(110). and the atomic percentage of oxygen by plasma sprayed $TiO_2$ composite coatings was higher than that by plasma sprayed $TiO_2$ coatings. The photocurrent of plasma sprayed $TiO_2$ composite coatings in heat treatment at $400^{\circ}C$ and 90 min was higher than that of plasma sprayed $TiO_2$ coatings in same heat treatment conditions at ultraviolet and visible light, as was high in oxygen affinity by heat treatment.