• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.II
• /
• pp.1394-1397
• /
• 2005

Hyundai LCD Inc. and LUXELL Technologies Inc. have jointly developed a 1.5" passive matrix full color OLED display ($132{\times}RGB{\times}96$, 111ppi) with characteristics of enhanced contrast ratio using black layer technology. This prototype ECR OLED was fabricated with the structure of ITO/HIL/HTL/RGB EML/HBL/ETL/LiF/Black Layer/Cathode and showed significant improvement of contrast ratio comparing with that of non-filtered OLED as well as compatible with circular polarizer OLED

• 전자통신동향분석
• /
• 제27권1호
• /
• pp.113-121
• /
• 2012

OLED는 두 개의 전극 사이에 유기물층을 배열하고 전계를 가하여 주입된 전자와 정공이 유기물 내에서 재결합하여 형성되는 여기자가 기저상태로 떨어지면서 빛을 내는 소자이다. 최근 OSRAM, Philips, LG화학, Panasonic 등의 기업에서 매우 우수한 특성을 보이는 OLED 패널 광원을 발표하고 있어 가까운 장래에 예전에 볼 수 없던 디자인의 OLED 조명이 일반조명 시장에 나올 것으로 예상됨에 따라 표준화 활동도 활발해지고 있다. OLED 조명은 기존 조명과 형태 및 특성이 다르기 때문에 기존 조명의 규격 사항을 그대로 적용할 수 없으며, 새로운 OLED 조명 표준 제정은 필수이다. 또한 국제표준화기구의 인증 마크의 유무는 자사 제품의 우수성과 안전성을 홍보하는 수단이고 해외로 진출하기 위해서는 해외의 주요 인증 획득이 필수적인 요소이므로 올바른 OLED 조명 표준 제정과 시험 방법 정립을 통하여 OLED 조명 제품의 국내외 신뢰를 확보하는 데 노력해야 할 것이다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.246.2-246.2
• /
• 2014

Green-light emitting OLED with single layer of Alq3 and orange-light emitting OLED with double layer of rubrene/Alq3 as EML were fabricated and characterized comparatively. The two OLED devices were based on an anode of ITO, HTL of TPD, and cathode of Al, respectively. The green light emitting OLED was then prepared with Alq3 as both ETL and EML, while the orange-light emitting OLED was prepared with rubrene deposited on Alq3. All the component layers of the OLED devices were deposited by a thermal evaporation technique in vacuum. Photoluminescence characteristics of the EML layers were investigated. Electrolumiscence characteristics of the OLED devices were comparatively investigated.

• 한국산업융합학회 논문집
• /
• 제23권6_2호
• /
• pp.1111-1117
• /
• 2020

In this study, the carbonation characteristics of concrete according to the mixture of OLED waste glass were evaluated. Replacement capacities of OLED waste glass were 0%, 10%, 20%, and 30% of cement, and they were named OG 0, OG 10, OG 20, and OG 30. As a result of the compressive strength test, OG 0 without replacing OLED waste glass showed high intensity until the 14th. However, the higher the replacement rate of OLED waste glass, the higher the compressive strength of 28 days. In addition, the speed of carbonation was faster with the higher the replacement rate of OLED waste glass, and the accelerated carbonation experiment was about three times faster than the natural carbonation test. In conclusion, the carbonation characteristics of OLED concrete are expected to be positive in terms of atmospheric CO2 absorption.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
• /
• pp.39-42
• /
• 2007

Since the scalability of OLED process is crucial factor for large-sized TV manufacturing, various technologies are reviewed based on the published information. Despite of recent technology advancement enabling high color purity, large-sized AMOLED, a lot of problems to solve still exist to enter the large-sized display market. Here, Samsung will discuss what has to be concerned for large panel and how far the OLED technologies need to go more for the large-sized AMOLED TV marketplace.

• 한국표면공학회지
• /
• 제50권5호
• /
• pp.398-404
• /
• 2017

In order to study the AC driving mechanism for OLED lighting, the fluorescent OLEDs were fabricated and the electroluminescent characteristics of the OLEDs by AC forward bias were analyzed. In the case of the driving method of OLED by AC forward bias under the same voltage and the same current density, degradation of luminescent characteristics for elapsed time progressed faster than in the case of the driving method by DC bias. These phenomena were caused by the peak voltage of AC forward bias which is ${\sqrt{2}}$ times higher than the DC voltage. In addition, the degradation of the OLED was accelerated because the AC forward bias had come close to the upper limit of the allowable voltage range even though the peak voltage didn't exceed the allowable range of the OLED. However, the fabricated fluorescent OLED showed little degradation of OLED characteristics due to AC forward bias from 0 V to 6.04 V. Therefore, OLED lighting by AC driving will become commercialized if sufficient luminance is realized at a voltage at which the characteristics of the OLED are not degradation by the AC driving method.

• 한국전기전자재료학회논문지
• /
• 제32권1호
• /
• pp.40-46
• /
• 2019

To study the frequency response characteristics of alternating-current-driven organic light-emitting diodes (OLEDs), we fabricated blue-fluorescent OLEDs and analyzed their electroluminescent characteristics according to the alternating current voltage and frequency. The luminance-frequency characteristics of alternating-current-driven OLED was similar to that of a low-pass filter, and the luminance of high-voltage OLED decreased at higher frequency than low-voltage OLED. The luminance characteristics of the OLED according to the frequency is due to the capacitive reactance in the OLED, generated during the alternating current driving. The frequency response characteristics of the OLED according to the voltage is due to the decrease in internal resistance of the organic layer. In addition, the negative voltage component of the alternating current did not affect the frequency response of the OLED. Therefore, the electroluminescent characteristics of OLED with an alternating current power of 60 Hz are not influenced by the frequency.

• 한국전자통신학회논문지
• /
• 제9권3호
• /
• pp.279-284
• /
• 2014

본 논문에서는 p-채널 저온 다결정 실리콘 박막 트랜지스터의 문턱전압 변동을 보상할 수 있는 새로운 OLED 화소회로를 제안하였다. 제안한 5-TFT OLED 화소회로는 4개의 스위칭 박막 트랜지스터, 1개의 OLED 구동 박막 트랜지스터 및 1개의 정전용량으로 구성되어 있다. 제안한 화소회로의 한 프레임은 초기화 구간, 문턱전압 감지 및 데이터 기입 구간, 데이터 유지 구간 및 발광 구간으로 나누어진다. SmartSpice 시뮬레이션 결과, 구동 트랜지스터의 문턱전압이 ${\pm}0.25V$ 변동 시 최대 OLED 전류의 오차율은 -4.06%이였고 구동 트랜지스터의 문턱전압이 ${\pm}0.50V$ 변동 시 최대 OLED 전류의 오차율은 9.74%였다. 따라서 제안한 5T1C 화소회로는 p-채널 다결정 실리콘 박막 트랜지스터의 문턱전압 변동에 둔감하여 균일한 OLED 전류를 공급함을 확인하였다.

• 한국통신학회논문지
• /
• 제36권11B호
• /
• pp.1403-1412
• /
• 2011

본 연구는 OLED 조명산업을 대상으로 직관적 방법론을 이용한 R&D 유망 분야 발굴 연구를 수행했다. 이를 위해 국내 조명산업 전문가 69명을 패널로 구성하여 1개월에 걸친 심층면접 및 설문조사를 진행하였다. 본 연구는 OLED 조명산업을 패널, 패널용 소재/부품, 제조장비, 조명시스템의 4개 분야로 대분류하고, 각 분야별로 핵심기술을 선정하여 총 14개의 R&D 가능분야를 세분류했다. 각 분야별 기술경쟁력을 평가한 결과, 우리나라의 기술경쟁력이 가장 높게 평가된 분야는 OLED 패널 분야로 나타났으며, 반면에 OLED 패널용 소재/부품의 기술경쟁력이 낮은 것으로 평가되어 개선책이 요구된다. 한편, 경제성, 정책부합성, R&D 효과성을 종합적으로 평가하여 7개 R&D 유망 분야를 선정했다. OLED 패널의 4가지 핵심기술인 백색, 투명, 색가변, 플렉시블 OLED 패널 제조 기술이 가장 유망한 분야로 평가되었고, 다음으로 면광원용 유기소재, 기판 소재/부품, 대면적 기판형성 장비가 유망 분야로 평가되었다.

• Journal of Information Display
• /
• 제11권1호
• /
• pp.17-20
• /
• 2010

With the increasing demand for a better FPD image quality, better evaluation metrics and advanced display quality measurement methods are required to meet these needs. There are many measurement methods for evaluating the viewing angle of various display devices, but these methods, which include luminance drop, color shift, and contrast ratio decrease, are imperfect considering that human perception does not completely correlate to them. In this paper, a new method of measuring the perceptual angle of FPDs is proposed, considering human visual perception, which uses the color space of the color appearance model.