• Journal of Oral Medicine and Pain
• /
• v.33 no.3
• /
• pp.269-277
• /
• 2008

The purpose of this study was to estimate occlusal tooth wear and bruxism severity in TMD patients, and evaluate the effectiveness of the present age estimation method by occlusal tooth wear in TMD patients. Takei's age estimation method was applied to 163 subjects(56 controls, 107 TMD patients). The author analyzed the degree of occlusal tooth wear from the difference between estimated age and actual age. The obtained results were as follows: 1. In all age group, occlusal tooth wear in TMD patients is higher than those in asymptomatic controls. In 20's age group, a statistically significant difference was found. 2. In both gender, occlusal tooth wear in TMD patients is higher than those in asymptomatic control. In male, a significant difference was found. 3. Occlusal tooth wear in TMD patients with bruxism is significantly higher than that in control. 4. We found no significant difference in bruxism severity and occlusal tooth wear among the RDC/TMD subgroups. 5. Application of Takei's method would be still useful for age estimation in Korean. In case of age estimation of TMD patients using occlusal tooth wear, evaluation of the bruxism severity and appropriate correction according to age, sex and difference of geographical location should be considered.

• Journal of Oral Medicine and Pain
• /
• v.19 no.2
• /
• pp.153-168
• /
• 1994

The aim of the present study was to investigate a relation between occlusal wear area and occlusal contact patterns. For the purpose, occlusal wear area were measured in 58 dental students and in 129 patients with temporomandibular disorders(TMDs) from dental casts. Teeth used in this study were from canine to second molar on both sides in upper arch, totally ten. Occlusal wear area on casts was marked by pencil and photocopies, and then, the area was measured with planimeter. Occlusal relation was clinically examined with regard to Angle's classification, chewing side preference, lateral guidance pattern and bruxing and/or clenching habit. T-Scan, electronic occlusal contact analyzer, was used to record occlusal contact number, contact force, contact time and occlusal balance that is TLR(total left-right statistics) during tooth contact. All measurement were repeated 3 times and the average value was used for data processing. The obtained results were as follows : 1. Mean value of occlusal wear area did not differ significantly between dental students and patients. 2. There ws not significant difference in wear area between chewing side and non-chewing side in both groups. 3. Occlusal wear area was significantly increased with age in both groups. 4. Three subgroups divided by Angle's classification did not show any difference in occlusal wear area among them, but three subgroups divided by lateral guidance pattern showed slightly significant difference between canine guide subgroup and group function subgroup in patients. Occlusal wear ares\a in group function subgroup wear larger than canine guide subgroup. 5. Mean value of wear area in patients with bruxing and/or clenching habit did not differ from those in patients without such habit. 6. Correlationship among items related to occlusal contact pattern were highly consistent and significant in dental students and only one item significantly correlated with occlusal wear area was tooth contact time.

• The Journal of Korean Academy of Prosthodontics
• /
• v.58 no.2
• /
• pp.121-129
• /
• 2020

From the point of view of oral rehabilitation, the treatment of extensive tooth wear requires a prosthetic approach. Physiological tooth wear is considered as a normal process and generally does not require treatment, but excessive tooth wear causes problems like inadequate occlusion and esthetics. Changes of occlusal vertical dimension should be made through accurate diagnosis and analysis. Also, the patient's adaptation to the changed occlusal vertical dimension should be assessed over time. This case was a 60-year-old male patient who complained of a decrease in chewing function and esthetics due to severe tooth wear. Full-mouth rehabilitation was performed with a tooth supported fixed prosthesis. An occlusal stabilization splint and provisional restoration were used to evaluate the adaptation to increased occlusal vertical dimension and induce a stable centric relation position. After that, monolithic zirconia prosthesis was delivered. We report this as a satisfactory functional recovery and esthetics.

• The Journal of Korean Academy of Prosthodontics
• /
• v.57 no.4
• /
• pp.405-415
• /
• 2019

Excessive tooth wear can cause irreversible damage to the occlusal surface and can alter the anterior occlusal relationship by destroying the structure of the anterior teeth needed for esthetics and proper anterior guidance. The anterior deep bite is not a morbid occlusion by itself, but it may cause problems such as soft tissue trauma, opposing tooth eruption, tooth wear, and occlusal trauma if there are no stable occlusal contacts between the lower incisal edge against its upper lingual surface. The most important goal of treatment is to form stable occlusal contact in centric relation. In this case report, patients with decrease in vertical dimension and anterior deep bite due to maxillary posterior tooth loss and excessive tooth wear were treated full mouth rehabilitation with increased vertical dimension to regain the space for restoration and improve anterior occlusal relationship and esthetics. The functional and aesthetic problems of the patient could be solved by the equal intensity contact of all the teeth in centic relation (CR), anterior guidance in harmony with the functional movement, and restoration of the wear surface beyond the enamel range.

• The Journal of the Korean dental association
• /
• v.50 no.1
• /
• pp.6-12
• /
• 2012

As in all other parts in the body, oral tissue also undergoes dramatic changes with increasing age. Since these changes occasionally go beyond physiological scope, which may result in pathological changes, it is essential for dentist to understand changes caused by normal aging process. With increasing age, tooth morphology and occlusion also varies, especially loss of hard tissue, which is taking place in lifelong time, occurs as a result of tooth wear. When this loss of hard tissue is presented rapidly or excessively, functional and esthetical problems are raised, resulting in lowering quality of life of patient as well as making dental treatment for oral rehabilitation even more complex. Therefore, based on understanding of change in occlusion with increasing age, strategic approaches for maintenance of oral health in both functional and esthetic aspect are required as appropriate restoration and maintenance for progressive tooth wear enables desirable occlusal relationship. Carefully planned-restorative treatment in accordance with changed occlusal relationship is also required in the same context. Instead of taking changes in oral tissue as only a consequence of ageing, it is vital to educate patient and his or her guardian, assuring maintenance of oral hygiene and regular dental check-up are of utmost importance for improved oral health.

• The Journal of Korean Academy of Prosthodontics
• /
• v.56 no.4
• /
• pp.302-307
• /
• 2018

Multiple tooth loss and excessive occlusal wear can result in damage to occlusal disharmony, functional disorders and esthetic problems, requiring comprehensive prosthetic treatments. Changing vertical dimension harmonized with surrounding muscle tissue is important. In this case, the patient with loss of vertical dimension caused by severe tooth loss and tooth wear was treated with the analysis of vertical dimension, such as diagnostic model, radiography and various clinical exams. the patient was satisfied with favorable functions and esthetics for 1 years of follow-up.

• The Journal of Korean Academy of Prosthodontics
• /
• v.37 no.3
• /
• pp.328-342
• /
• 1999

This study was performed to investigate the factors related to tooth wear. For this study, 78 patients with temporomandibular disorders and 76 dental students without any signs and symptoms of temporomandibular disorders were selected as the patients group and as the normal group, respectively. Preferred chewing side, Angle's classification, lateral guidance pattern, head and shoulder posture were observed clinically. Electromyographic activity of anterior temporalis and masseter muscle were recorded with $BioEMG^{(R)}$ and occlusal status were recorded with $T-Scan^{(R)}$. Wear facet area of each tooth was measured from working model of upper arch corresponding to the occlusal status from T-Scan. Wear facet area were measured with planimeter in $mm^2$. Total area were divided into incisal, canine, posterior tooth area. Anterior wearfacet area was incisor area plus canine area, and unilateral area was anterior area plus posterior area. The data collected were analyzed by SAS statistical program and the results of this study were as follows: 1. There was no significant difference between the two groups in total werafacet area, and male subjects showed tendency to have larger area in the normal group but female subjects showed tendency vice versa. 2. There was no significant difference related to preferred chewing side and Angle's classification, however some difference was observed by lateral guidance pattern. Anterior wear facet area in subjects of canine guidance was the largest in the three subgroups. 3. Subjects with head tilting to right side had larger posterior and total area, and subjects with higher shoulder in right side had larger canine and anterior area than any other subgrous. 4. Electromyographic activity of masseter muscle was more correlated with wear facet area than anterior temporalis muscle, and tooth contact number and force were significantly correlated with wear facet area, but the most important factor affecting tooth attrition was age.

• Journal of the Korean Academy of Esthetic Dentistry
• /
• v.32 no.1
• /
• pp.23-32
• /
• 2023

A patient with para-functional habits can cause widespread teeth wear, along with temporomandibular joint disorders and myofascial pain syndrome in the masticatory muscles. Prolonged teeth wear is associated with a decrease in vertical occlusal dimension, leading to issues such as changes in facial morphology, decreased masticatory efficiency, and temporomandibular joint disorders. To achieve a three-dimensional full-mouth rehabilitation in patients with decreased vertical occlusal dimension, accurate diagnosis, analysis, and proactive treatment planning are essential. Prosthetic treatment accompanied by the restoration of physiological vertical occlusal dimension and the re-establishment of a normal occlusal plane is necessary. This case report presents a full-mouth rehabilitation case involving a patient with overall teeth wear, showing decreased vertical occlusal dimension which results in discomfort in the temporomandibular joint and aesthetic dissatisfaction. The report highlights the successful outcome achieved through the use of occlusal stabilization splint for temporomandibular joint stability and Gothic arch tracing devices for the re-establishment of intermaxillary relationships. Also, through adjustments and adaptation assessment using provisional prostheses, favorable outcomes were achieved both functionally and aesthetically.

• The Journal of Korean Academy of Prosthodontics
• /
• v.54 no.2
• /
• pp.140-145
• /
• 2016

Excessive occlusal wear causes loss of tooth structure, occlusal plane disharmony, impaired function and esthetic problems. Although the decrease of occlusal vertical dimension may be compensated by the growth of alveolar bone and tooth eruption, minimal increase of occlusal vertical dimension may be required for esthetics and retention of prosthesis. In this case, a 44-year-old male patient visited Seoul National University Dental Hospital with chief complaint of severe tooth wear and shade disharmony. Based on assessment of diagnostic wax-up, 3 mm increase of occlusal vertical dimension was determined. Removable occlusal splint and interim prosthesis was used to ascertain patient's comfort and adaptation. After the adaptation period, definitive prosthesis fabricated with full-contour monolithic zirconia were delivered and the patient was recommended to wear a nightguard device for prosthesis protection. This report presents a case of full mouth rehabilitation with the elevation of patient's occlusal vertical height, resulting in satisfactory esthetics and functions.

• The Journal of Korean Academy of Prosthodontics
• /
• v.50 no.4
• /
• pp.324-329
• /
• 2012

Excessive tooth wear causes loss of tooth structure, disharmony of occlusal plane, functional and esthetic problems. Although the decrease of occlusal vertical dimension may be compensated by growth of alveolar bone, if the length of tooth is not enough for the retention of restoration, minimum increase of occlusal vertical dimension is required without discomfort of the patient. In this case, 33-year-old woman drinks more than 1 liter of soft drinks a day and has bruxism in night time, visited in Seoul National University Dental Hospital with chief complaint of generalized tooth wear and related esthetic and functional problems. It was considered as a loss of occlusal vertical dimension based on the accelerated tooth wear caused by erosion and bruxism and facial appearance, phonetic, esthetic, functional evaluations. It was planned to raise occlusal vertical dimension by provisional restoration two times for patient's adaptation, 3 mm and 2 mm each, total 5 mm. Confirming no discomfort and clinical symptom during total 16 weeks after restoration with provisional fixed restoration, it was restored with porcelain fused to gold crown and bridge. Because the patient was young woman, anterior teeth were restored with collarless porcelain fused to gold crown. This case presents that satisfactory esthetic and functional result by full mouth rehabilitation with increase of occlusal vertical dimension.