• Journal of Navigation and Port Research
• /
• v.36 no.3
• /
• pp.149-155
• /
• 2012

This study primarily analyzed the use of shipping companies' welfare program by the characteristics of crew's demography and working condition on board, and next examined the effect of the satisfaction to the program on the organizational commitment and job satisfaction to the companies, in order to survey the shipping companies' welfare reality which has performed an influential role to meet the various welfare needs of personal crew. According to the findings in the recent survey of 459 seamen on board, there are differences among the use of the program by crew's the tolerance to work on board and personal characteristics, for example, age, marriage, position, period on board, and years of service. Moreover, the study verified the fact that the higher satisfaction to the use of those program, the higher organizational commitment and job satisfaction of crew.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.579-587
• /
• 2008

Promotion of the line no.2 in Seoul Metro was changing from the existing signaling facilities for ATS(Automatic Train Stop) vehicles to the up-to-date signaling facilities for ATO(Automatic Train Operation). But, in consequence of conducting a trial run after being equipped with the ATO signaling facilities, the matter related to mix-operation with the existing ATS signaling facilities appeared. The operation of the existing ATS signaling system in combination with the ATO signaling system has made improper working related to frequency recognition of the ATS On-board Computerized Equipment. This obstructs operation of a working ATS vehicle. That is, as barring operation of an ATS vehicle that should proceed, it may make the proceeding ATS vehicle stop suddenly and after all, it will cause safety concerns. In this paper, we designed a wayside track occupancy detector that previously prevents improper working related to frequency recognition of the ATS On-board Computerized Equipment by gripping classification and working processes of operating trains throughout transmission of local signaling information from the existing facilities, which does not need to change or replace the existing signaling facilities. Furthermore, we described general characteristics of the wayside track occupancy detector and modeled the IFC(InterFace Contrivance) device and the logical circuit recognizing signal information. Then, we made an application program of PLC(programmable Logic Computer) based on the stated model. We, in relation to data transfer method, used the frame in TCP/IP transfer mode as the standard, and we demonstrated that ATO transmission frequency is intercepted.

• Journal of Navigation and Port Research
• /
• v.42 no.4
• /
• pp.299-310
• /
• 2018

This study examined the significance of the crew's professional consciousness and sought to clarify the differences in the professional consciousness of crew by considering biographical characteristics of the crew and onboard working situations, which were expected to influence the professional consciousness of crew. The empirical analysis showed the crew's individual characteristics such as age, marital status, position in ship organization and nationality significantly influenced professional consciousness. The comparison in the differences of professional consciousness level among crew's nationalities showed that the professional consciousness of Filipino crew was the highest, and in the descending order of Indonesia, Myanmar, Chinese, and South Korea. The analysis results of other variables of on-board working characteristics showed that as crew's satisfaction of welfare increased, crew's professional consciousness increased, whereas the feeling of isolation from home and society had a statistically significant negative (-) impact on crew's professional consciousness. Furthermore, the analysis of multinational crew manning characteristics stated that cross-cultural acceptance did not have a statistically significant impact on the crew's professional consciousness, while cross-cultural adaptability had a statistically significant impact. This study emphasize the importance of the crew's professional consciousness and suggest how to enhance it, which allows crew to continue their career with the charm and pride of their profession.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.48 no.2
• /
• pp.147-154
• /
• 2012

In head sea, a ship has mainly the longitudinal motion such as vertical acceleration and pitch. In that case, the motion characteristics of a ship will have changed as the location different from each of place vertically and horizontally on board. The author carried out an experiment about the ship's vertical acceleration and pitch according to the location for the head sea, and analyzed the data with the aid of the statistical and spectral analyzing method to get the motion characteristics of the vessels. The response of vertical acceleration and pitch not deeply depend on the decks vertically, but displayed the relative big different value horizontally even if same deck. The biggest response of vertical acceleration and pitch among the accommodations was shown at scientist room, but the value of it not reached to the minimum requirement of ISO 2631-1 for working on board.

• Journal of the Korean Institute of Navigation
• /
• v.25 no.4
• /
• pp.347-360
• /
• 2001

The purpose of this study is to find out the subjective and objective fatigue level and the characteristics of seamen's physical strength with the service period on board, to have a new understanding of the vocation, and to explore a physical exercising program for the seamen. The questionnaire survey for the seamen who had been in service on the ocean going vessels was conducted and the results are fumed out as the followings. Total number of seamen who had answered the questionnaire was 64 persons and the distribution status of service period group was identified as 16 persons for each of 4 groups； the group was classified as the group of less than 5 years, 5 - 10 years, 10 - 15 years, and more than 15 years. 1. Working conditions Working hours in a week was identified as 44－56 hours(45.3%) and the number of 45.3% of the seamen answered the working hours in week is more than 56 hours. The seamen of 25.0% are unsatisfied or very unsatisfied with their vocation. The seamen of 65.6% are smoking, and 45.3% of them drink. The seamen of 44.,3% drink once or more in a week. And the seamen of 67.2% do not take any exercise in a week. 2. Contribution to the seamen's fatigue and subjective symptom The most contributive factor to the seamen's fatigue was identified as the short of sleeping(21.5%), overwork(19.2%), poor working conditions (18.6%), and the friction in human relations also becomes one the contribution to the fatigue(14.0%). The subjective symptom by fatigue was identified as the feeling of languid, sleepy and tiredness of eyes. 3. Characteristics of the seamen's physical strength and Interrelations The grip strength and back strength of the seamen whose service period is less than 5 years were measured as 40.44kg and 127.8kg. The sit ups in the group of service period less than 5 years was measured as 36.84 times, and the vertical jump for the seamen in this group was measured as 46.55cm. The closed-eyes foot balance was measured as 33.64 seconds in the group of service period between 5 and 10 years, and side-step was measured as 35.31 times in the group of service period less than 5 years. The standing trunk flexion was measured as 10.54cm for the seamen whose service period is between 10-15 years, and the trunk extension was measured as 50.70cm for the seamen whose service period is less than 5 years. And the step test of the seamen whose service period is between 10-15 years was measured as 54.44 numbers, and the number of flickers of the seamen whose service period is less than 5 years was measured as 32.94.

• Journal of the Korean Home Economics Association
• /
• v.20 no.4
• /
• pp.155-168
• /
• 1982

What is attempted here is to find out an optimum method for the design of physical environments that could save human energy expenditures and safely perform household duties. There are, if any, very little amount of research done in this area. This is particulary so when the work relates to the designing of household storage facilities in the light of the energy metabolism of human body. The first step to this study, therefore, is to find out the ways by which we can determine the energy metabolism of human body accurately. To measure the volume and the concentration of human respiration continuously and automatically, a new apparatus is selected here. This includes the recording system with the Wright Respirometer and the Expired Gas Analyzer as well as the computer system to multiply volume by concentration of human respiration and to integrate them for a given time. Then, the author experimented on the reliability of this apparatus and came to the conclusion that this apparatus satisfied our need to research the energy metabolism of human body. Next, the general plan and procedures to experiment with this apparatus have been determined as follows: 1) subjects are three young and sound females. Their physical characteristics are shown in Table 1 and most approximates the standard characteristics of Japanese females, 2) height of open shelves is selected in such away as to correspond to the respective height of each subject(see Table 2), 3) utensils to be stored are box shaped object, which weight is 0.5kg, 1.0kg, 2.0kg or 3.0kg, 4) working motions are given while one or two hands as to place utensil on each shelf from the standard working board, 85 cm in height and then to place back it on the board from the shelf and repeated in constant velocity as 10 times per a minute, 5) each posture of motion is chosen by each subject in free, 6) procedures of measurement of human energy metabolism ard shown at(6), 1, Section 3 as specific methods for using this apparatus. Findings of this study are as follows: 1. Human energy expenditures for storing utensils on shelves by each subject are shown in quantity more accurately than in any other studies, under varying conditions about height of shelves, load of utensils and working motion with one hand and two hands (see Fig. 8~13 and Table 3). 2. Experimental formulae of human energy expenditure for that work are shown as formula (8), (9) and (10), to generalize results of 1. and to apply those for working motion under given conditions. 3. As results of analysis on gained data, we are able to show the standard model of human energy expenditures for storing untensils on shelves by the standard Japanese female (see Table 7 and Fig. 14).

• Journal of electromagnetic engineering and science
• /
• v.5 no.3
• /
• pp.140-145
• /
• 2005

In this paper, an experimental investigation for return loss and a software-based prediction for interference level of single-packaged filtering antenna composed of dielectric waveguide filter and PCB(Printed Circuit Board) slot antenna in transceiver module have been carried out with several different feeding structures in millimeter-wave regime. The implementation and embedding method of the existing air-filled waveguide filters working at millimeter-wave frequency on general PCB substrate have been described. In a view of the implementation of each components, the dielectric waveguide embedded in PCB and LTCC(Low Temparature Co-fired Ceramic) substrates has employed the via fences as a replacement with side walls and common ground plane to prevent energy leakage. The characteristics of several prototypes of filtering antenna embedded in PCB substrate are considered by comparing the wideband and transmission characteristics as a function of bent angle of transmission line connecting two components. In addition, as an essential to the packaging of transceiver module working at millimeter-wave, miniaturization technology maintaining the performances of independent components and the important problems caused by integrating and connecting the different components in different layers are described in this paper.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.31 no.6
• /
• pp.433-436
• /
• 2018

A total internal reflection (TIR) linear lens of size $190(W){\times}5(D){\times}2.1(H)mm^3$ has a directivity of $25^{\circ}$ and was made of a polydimethysiloxane (PDMS) silicone resin with a refractive index of 1.4 and a transmittance of 93% at 365 nm UV wavelength. A light source with a size of $190{\times}25.5mm^2$ was fabricated by installing a TIR linear lens on a chip on board (COB) type LED module mounted with a $1.1{\times}1.1mm^2$ size UV LED. The optical characteristics of the light source showed a maximum irradiation density of $3,840mW/cm^2$ at a working distance of 5 mm and a high uniformity of 91.6% over a $150{\times}25mm^2$ irradiation area. The thermal characteristics of the light source were measured at a supply current of 500 mA. The saturation temperature was reached after 30 min of operation, and measured to be $95^{\circ}C$.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.7
• /
• pp.819-827
• /
• 2023

If respiratory arrest occurs or cardiopulmonary resuscitation (CPR) is performed for a long period on board ships, CPR with rescue breathing (not compression-only CPR) is required. Accordingly, ships must have resuscitation equipment for oxygen supply, and seafarers must have the maritime competence to use it. This study aimed to analyze the placement status of resuscitation equipment on ships and seafarers' intention to use them in order to increase the usability of resuscitation equipment on board ships and propose improvement measures. The study was conducted from February 2, 2023, to April 21, 2023, and a total of 340 seafarers were surveyed. The data were analyzed by frequency, percentage, and chi-square test using SPSS WIN 23.0. The results showed that the checking of resuscitation equipment was high among seafarers in the positions of officer, captain, deck department personnel, and ocean-going personnel. The intention of seafarers to use resuscitation equipment was low, and the main barrier was the lack of knowledge on how to use. Among the general characteristics of the study participants, those whose rank was that of officer or captain, whose working department was the deck, voyage who were ocean-going, and who managed a gross tonnage of 20,000 tons or more had a high intention to use resuscitation equipment. Participants who knew the necessity of rescue breathing and had received practice and equipment-based training were active in using resuscitation equipment. Therefore, a system should be developed so that all ships can be equipped with resuscitation equipment, and an environment must be created to increase accessibility to resuscitation equipment on board ships. In addition, an education system based on practical and resuscitation equipment training must be established to ensure that seafarers have maritime competence.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.05a
• /
• pp.3.1-3.1
• /
• 2011

Over the past decade, the major efforts for lowering the cost of electronics has been devoted to increasing the packaging efficiency of the integrated circuits (ICs), which is defined by the ratio of all devices on system-level board compared to the area of the board, and to working on a larger but cheaper substrates. Especially, in flexible electronics, the latter has been the favorable way along with using novel nanomaterials that have excellent mechanical flexibility and electrical properties as active channel materials and conductive films. Here, the tool for achieving large area patterning is by printing methods. Although diverse printing methods have been investigated to produce highly-aligned structures of the nanomaterials with desired patterns, many require laborious processes that need to be further optimized for practical applications, showing a clear limit to the design of the nanomaterial patterns in a large scale assembly. Here, we demonstrate the alignment of highly ordered and dense silicon (Si) NW arrays to anisotropically etched micro-engraved structures using a simple evaporation process. During evaporation, entropic attraction combined with the internal flow of the NW solution induced the alignment of NWs at the corners of pre-defined structures. The assembly characteristics of the NWs were highly dependent on the polarity of the NW solutions. After complete evaporation, the aligned NW arrays were subsequently transferred onto a flexible substrate with 95% selectivity using a direct gravure printing technique. As proof-of-concept, flexible back-gated NW field effect transistors (FETs) were fabricated. The fabricated FETs had an effective hole mobility of 0.17 $cm2/V{\cdot}s$ and an on/off ratio of ${\sim}1.4{\times}104$. These results demonstrate that our NW gravure printing technique is a simple and effective method that can be used to fabricate high-performance flexible electronics based on inorganic materials.