• Proceedings of the Optical Society of Korea Conference
• /
• 2006.07a
• /
• pp.159-160
• /
• 2006

By using 2 signals without additional input signal, an all-optical binary half adder at 10 Gbps is demonstrated. The half adder operates in single mechanism, which is XGM. By achieving this experiment, we also explored the possibilities for the enhanced complex logic operation and higher chances for multiple logic integration.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.6
• /
• pp.1346-1355
• /
• 2005

Recently, the development of passive optical networks (PON) for FTTH (Fiber-To-The-Home) have been actively conducted. In PON, a burst-mode transceiver is one of key modules. In this paper, we have made the protype module of a 155.52 Mpbs optical burst-mode transceiver with commercially available chips and then have measured the performance. Also, a new method of burst-mode clock recovery have been proposed. The burst-mode clock recovery implemented by using CPLD(Complex Programmable Logic Device) has coupled with the above burst-mode transceiver and has been tasted.

• Journal of the Korean Society of Safety
• /
• v.19 no.1
• /
• pp.49-55
• /
• 2004

This study presents an analysis of comparison of P-type fire detection system with fuzzy logic-applied fire detection system. The fuzzy logic-applied fire detection system has input variables obtained by fire experiment of small scale with K-type temperature sensor and optical smoke sensor. And the antecedent part of fuzzy rules consists of temperature and smoke density, and the consequent part consists of fire probability. Also triangular fuzzy membership function is used for input variables and fuzzy rules. To calculate the final fire probability a centroid method is introduced. A fire experiment is conducted with controlling wood crib layer, cigarette to simulate actual fire and false alarm situation. The results show that peak fire probability is 25[%] for non-fire and is more than 80[%] for fire situation, respectively. The fuzzy logic-applied fire detection system suggested here is able to distinguish fire situation and non-fire situation very precisely.

• Proceedings of the KIEE Conference
• /
• 2006.10c
• /
• pp.385-387
• /
• 2006

We made the logic that can transmit the service data and clock of interest by using the optical signal and demodulate the original signal at the receiving end. Because We can interface the all communications equipment to which We intended to send the signal. We can modulate the dock and clocked data using optical signal and then transmit the original optical signal to the receiving end, finally, arbitrarily control the traffic between ports.

• Proceedings of the Optical Society of Korea Conference
• /
• 2006.07a
• /
• pp.209-210
• /
• 2006

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.8
• /
• pp.1-11
• /
• 2002

A multi-section DFB-LD shows optical bistability subject to externally injected light signal, then it has potential applications such as wavelength conversion and optical logic gates. In this paper, we have studied the optical bistability in multi-section DFB-LD using split-step time-domain model. It is confirmed that the multi-section DFB-LD, which is excited inhomogeneously, shows bistability. The optical bistable characteristics are investigated when input light is injected into a absorptive region. Simulation results show that multi-section DFB-LD works as a flip-flop depending on the set-reset optical pulse which has a few ns in switching time and a few pj in switching energy, so that it can act as a optical logic device. Besides, if we change the carrier lifetime and the differential gain coefficient, it is expected that the response time of optical output signal can be reduced.

• Journal of the Optical Society of Korea
• /
• v.20 no.4
• /
• pp.464-469
• /
• 2016

All-optical non-return-to-zero (NRZ) -to- return-to-zero (RZ) data-format conversion has been successfully demonstrated using a semiconductor optical amplifier in a fiber-loop mirror (so-called SOA-loop mirror) with a continuous-wave (CW) holding beam. The converted RZ signal after pulse compression has been used to create a 40 Gb/s OTDM (Optical Time Division Multiplexing) signal. Here is proposed an NRZ-to-RZ conversion method without any additional optical clocks, unlike conventional methods based on optical AND logic. In addition, it has the merit of operating at various bit-rate speeds without any controlling device. Moreover, it has a simple structure, and it can be used for all-optical bit-rate-flexible clock recovery.

• Korean Journal of Optics and Photonics
• /
• v.13 no.1
• /
• pp.84-87
• /
• 2002

By using SOA (Semiconductor Optical Amplifier), all-optical XOR gate has been demonstrated at 5 Gb/s in RZ format. Firstly, Boolean AB-and Boolean AB have been obtained. Then, Boolean AB and Boolean AB have been combined to achieve the all-optical XOR gate, which has Boolean logic of AB+AB.

• Journal of Electrical Engineering and Technology
• /
• v.1 no.4
• /
• pp.546-549
• /
• 2006

In this paper the neuron operation based on Brillouin-active fiber in optical fiber is described. The inherent optical feedback by the backscattered stokes wave in optical fiber leads to instabilities in the form of optical chaos. Controlling of chaos induced transient instability in Brillouin-active fiber is implemented with Kerr nonlinearity having a non-instantaneous response in network systems. The controlling chaotic instabilities can lead to multistable periodic states; create optical logic 'on' or high level '1' or 'off', or low level '0'. It is theoretically possible to apply the multi-stability regimes as an optical memory device for encoding and decoding series and complex data transmission in optical systems.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.05a
• /
• pp.568-574
• /
• 2004

On-line phase tracking of an extrinsic Fabry-Perot interferometer (EFPI) and experimental vibration control of a composite beam with a sensing-patch are investigated. We propose a sensing-patch for the compensation of the interferometric non-linearity. In this paper, a sensing-patch that comprises an EFPI and a piezo ceramic(PZT) is fabricated and the characteristics of the sensing-patch are experimentally investigated. A simple and practical logic is applied for the real-time tracking of optical phase of an interferometer. Experimental results show that the proposed sensing-patch does not have the non-linear behavior of conventional EFPI and hysteresis of piezoelectric material. Moreover, it has good strain resolution and wide dynamic sensing range. Finally, the vibration control with the developed sensing-patch has been performed using Fuzzy logic controller, and the possibility of sensing-patch as a sensoriactuator is considered.