• Journal of Pharmaceutical Investigation
• /
• 제22권2호
• /
• pp.149-153
• /
• 1992

The applicability of sodium alginate as a carrier of 5-fluorouracil as an oral delivery system was investigated. Hydrophobicity of sodium alginate was controlled by introducing cetyl group to this polymer. The effects of degree of esterification for n-cetyl partial ester on the rate of release of 5-fluorouracil in artificial gastric juice and artificial intestinal juice were examined. The release rete of the drug in the gastric juice was mainly affected by the diffusion of the drug. The release rate of the drug in the intestinal juice could be controlled by the degree of esterification. The alginate matrices may be a valuable addition as the carrier of 5-fluorouracil for an oral delivery system.

• 대한의생명과학회지
• /
• 제17권3호
• /
• pp.211-216
• /
• 2011

The chitosan-coated liposomes (chitosomes) were designed to improve the stability in the gastrointestinal (GI) tract and to enhance the efficacy for oral drug delivery of liposomes. The phosphatic acid (PA)-incorporated anionic liposomes were surface-coated with water soluble chitosan (WSC) by electro-ionic interaction. The shape of the chitosomes observed by transmission electron microscopy (TEM) was spherical in all the formulations and the coating layer by WSC could be founded through TEM images. The mean size and the zeta potential values of the chitosomes increased significantly with depending on the content of WSC added for coating the liposomes. The stability of the chitosomes in the GI tract was confirmed through the change of relative turbidity of the liposomal suspension. The plain liposomes (plasomes) suspension without adding WSC clearly showed the change of relatively turbidity in simulated gastric fluid (SGF), while the change degree of turbidity of the chitosomes in the SGF decreased as increasing of WSC content added for coating liposome. In the 5-CF release study from the plasomes and chitosomes, the plasomes released >90% of the initial 5-CF content at 4 h of release measurement. In contrast, the chitosomes released below 40% of initial content of 5-CF. In conclusion, these results indicate that the chitosomes can be used as a potential carrier for effective oral drug delivery.

• Journal of Pharmaceutical Investigation
• /
• 제24권2호
• /
• pp.73-83
• /
• 1994

Applications of liposomes as a drug carrier for the oral delivery of poorly-absorbable macromolecular drugs have been limited, because of their instability in gastrointestinal environments including pH, bile salts, and digestive enzymes. Two polysaccharides, dextran(DX) and pullulan(PL), were introduced to the preformed liposomes in order to enhance the stability. Palmitoyl derivatives of polysaccharides, palmitoyldextran(PalDX) and palmitoylpullulan(PalPL), were synthesizd and introduced to the liposomes during preparation for the same purpose of stability. The effects of these polysaccharides coating were evaluated basically by physical properties of particle size distribution and optical microscopy, then compared with uncoated liposomes by the observations of both in vitro stability and in vovo absorption characteristics. The geometric mean diameters of polysaccharide-coated liposomes were greater than that of uncoated liposome, showing the outermost polysaccharide-coated layer under the optical microscopy. In vitro stabilities of uncoated or polysaccharides-coated liposomes were measured by turbidity changes in various pH buffer solutions containing sodium choleate as bile salts. While uncoated liposome was very sensitive to bile salts, polysaccharides-coated liposomes were stable in relatively higher concentrations of sodium choleate, giving the results of better stability of PalDX- and PalPL-coated liposomes than that of DX- and PL-coated liposomes. After liposomal encapsulation of acyclovir(ACV), an antiviral agent as a model drug, it has been administered orally to rats as dose of ACV 40 mg/kg. Plasma concentrations of ACV were assayed by HPLC and analyzed by model-independent pharmacokinetics. Pharmacokinetic parameters of Cmax, tmax, and [AUC] have been compared.

• Archives of Pharmacal Research
• /
• 제28권6호
• /
• pp.736-742
• /
• 2005

Xyloglucan (XG), which exhibits thermal sol to gel transition, non-toxicity, and low gelation concentration, is of interest in the development of sustained release carriers for drug delivery. Drug-loaded XG beads were prepared by extruding dropwise a dispersion of indomethacin in aqueous XG solution (2 wt.-$\%$) through a syringe into corn oil. Enteric coating of XG bead was performed using Eudragit L 100 to improve the stability of XG bead in gastrointestinal (GI) track and to achieve gastroresistant drug release. Release behavior of indomethacin from XG beads in vitro was investigated as a function of loading content of drug, pH of release medium, and concentration of coating agent. Adhesive force of XG was also measured using the tensile test. Uniform-sized spherical beads with particle diameters ranging from 692 $\pm$ 30 to 819 $\pm$ 50 $\mu$m were obtained. The effect of drug content on the release of indomethacin from XG beads depended on the medium pH. Release of indomethacin from XG beads was retarded by coating with Eudragit and increased rapidly with the change in medium pH from 1.2 to 7.4. Adhesive force of XG was stronger than that of Carbopol 943 P, a well-known commercial mucoadhesive polymer, in wet state. Results indicate the enteric-coated XG beads may be suitable as a carrier for oral drug delivery of irritant drug in the stomach.

• Archives of Pharmacal Research
• /
• 제17권5호
• /
• pp.364-370
• /
• 1994

A microscopic mass balance approach has been developed to estimate the extent and rate of absorption for camier-mediated comounds. For the case competitive inhibition in the presence of an inhibitor which shares the same camier, the fraction dose absorbed (F) and absorption rate constant ($K_a$) of a drug can be calculated from its concentration profile in the intestinal lumen. Absorption parameters obtained by single-pass perfusion experiments were used in the simultaion of the absorption of some aminopenicilins. Predicted fractions dose absorbed and absorption rate constants of ampicilin and amoxicilin were significantly reduced in the presence of a 6-times higher molar dose of cyclacilin. The drug-drug interactions on the competitive absroption of camier-mediated compounds were determined with regard to F and $K_a$. Predicted decreases in F for some aminopenicilins corrlated well with decrease in the urinary recovery in humans reported in the literature. Predicted decrease in the mean absorption rate constant ($\barK_a$) explain the delays in the time of peak plasma concentration ($T_{max}$) reported in humans.

• Journal of Pharmaceutical Investigation
• /
• 제28권4호
• /
• pp.249-255
• /
• 1998

Solid Lipid Nanoparticle(SLN), one of the colloidal carrier systems, has many advantages such as good biocompatibility, low toxicity and stability. In this paper, the effects of drug lipophilicity and surfactant on the drug loading capacity, particle size and drug release profile were examined. SLNs were prepared by homogenization of melted lipid dispersed in an aqueous surfactant solution. Ketoprofen, ibuprofen and pranoprofen were used as model drugs and tweens and poloxamers were tested for the effect of surfactant. Mean particle size of prepared SLNs was ranged from 100 to 150nm. The drug loading capacity was improved with the most lipophilic drug and low concentration of surfactant. Particle size and polydispersity of SLNs were changed according to the used lipid and surfactant. The rates of drug release were controlled by the loading drug and surfactant concentration. SLN system with effective drug loading efficiency and proper particle size for the intravenous or oral formulation can be prepared by selecting optimum drug and surfactant.

• Journal of Pharmaceutical Investigation
• /
• 제30권4호
• /
• pp.259-266
• /
• 2000

Vitamin A palmitate, an oily drug which has low chemical stability and is poorly absorbed in the intestine, was formulated into a novel powdered dosage form. This is designated as a redispersible dry emulsion by freeze-drying technique. Before preparing a dry emulsion, vitamin A palmitate oil in solid in water (O/S/W) emulsion with soybean oil and coconut oil using Aerosil 200 as an emulsion stabilizer and polyoxyethylene-polyoxypropylene-blockcopolymer (Pluronic F68) as a surfactant was prepared. The resultants of the stability tests indicated that vitamin A palmitate O/S/W emulsion was improved on increasing the oil content of the formulation. The resultant dry emulsion particles have a good stabilities and free flow properties and readily released the oily droplets to form stable emulsions on rehydration. The drug releasing property from the resultant dry emulsion particles was dependent on factors such as amount of oily carrier(soybean oil) and surfactant(Pluronic F68) formulated. Above 80% of vitamin A palmitate content was released from the dry emulsion for 1 hour. It was deduced that vitamin A palmitate dry emulsion was definitely suitable for oral administration, since small droplets of vitamine A palmitate from the dry emulsion may alter the drug absorption profile resulting in bioavailability enhancement.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제9권3호
• /
• pp.191-195
• /
• 2004

Drug delivery systems that are based on pectin have been studied for colon specific delivery using the specific activity of colon microflora. The aim of this study was to design a novel method of manufacturing pectin microspheres without oils and surfactants and to investigate the potential use of the pectin microspheres as an oral colon-specific drug carrier. The pectin microspheres were successfully formed using the spray drying method and crosslinking with calcium chloride. From the crosslinked pectin microspheres, indomethacin (IND) release was more suppressed than its release from non-crosslinked microspheres. In a low pH (pH 1.4) environment, the pectin microspheres released IND at an amount of about 18${\pm}$2% of the total loaded weight for 24 h while the release rate of IND was stimulated at neutral pH (pH 7.4). IND release from the pectin microspheres was increased by the addition of pectinase. The results clearly demonstrate that the pectin microspheres that were prepared by the spray drying and crosslinking methods are potential carriers for colon-specific drug deliveries.

• 폴리머
• /
• 제36권6호
• /
• pp.699-704
• /
• 2012

경구투여를 통한 친수성 약물의 방출조절을 위하여 이중층으로 된 고분자 담체를 설계하였다. 생체고분자인 alginate와 chitosan은 각각 극성 흡수성분으로, poly(D,L-lactide)는 소수성 피막으로, 그리고 theophylline과 diclofenac sodium은 모델 약물로 사용하였다. 담체는 지연방출과 이어지는 지속방출을 위하여 외부 껍질은 poly(D,L-lactide)로, 내부중심은 약물과 함께 알지네이트 또는 키토산으로 구성되어진 이중층의 미립구 담체로 성형하였다. 담체와 약물간의 극성 조합으로 인한 담체의 모폴로지와 약물방출 거동을 조사하였다. 담체와 약물 그리고 pH 환경의 상대적 극성이 약물방출 특성에 상당한 영향이 있음을 확인하였다.

• Bulletin of the Korean Chemical Society
• /
• 제35권7호
• /
• pp.1939-1943
• /
• 2014

Solid dispersion (SD) system of everolimus (EVR) with Gelucire 50/13 (Stearoyl polyoxyl-32 glycerides) was prepared using melt granulation technique with the aim of improving the physicochemical properties and dissolution rate. The solid state characterization using scanning electron microscopy and X-ray powder diffraction, indicated that the drug was homogeneously distributed in the surfactant carrier in a stable amorphous form. The dissolution rate of EVR from the optimized SD composed of the drug, Gelucire 50/13 and microcrystalline cellulose in a weight ratio of 1:5:10, was markedly rapid and higher than that from the drug powder and the market product (Afinitor$^{(R)}$, Novartis Pharmaceuticals) in all dissolution mediums tested from pH 3.0 to pH 6.8. The results of this study suggest that formulation of SD with Gelucire 50/13 using melt granulation procedure may be a simple and promising approach for improving the dissolution rate and oral absorption of the anti-cancer agent without the need for using an organic solvent.