• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.131-134
• /
• 2009

We have developed a flexible OTFT backplane in which all the dielectrics are formed by solutionprocess in order to achieve low-cost and highthroughput manufacturing. The backplane successfully drives a flexible AM-OLED display with peak brightness of > 200 nit and the contrast ratio of > 1000:1 with great mechanical flexibility.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.969-971
• /
• 2007

The black/white electronic ink containing high mobility white nano particles and the organic black pigment particles dispersed in dielectric fluid were prepared. A charge control agent affects the electrophoretic zeta potentials of white particle, which show the maximum value in zeta potential. The electronic ink panel fabricated with the charged white particles and the black particles exhibits more than 15:1 contrast ratio at 10V.

• Current Applied Physics
• /
• v.18 no.11
• /
• pp.1306-1312
• /
• 2018

The Mn-doped copper nitride ($Cu_3N$) films with Mn concentration of 2.0 at. % have high crystallinity and uniform surface morphology. We found that the as-synthesized Mn-doped $Cu_3N$ films show suitable optical absorption in the visible region and the band gap is ~1.48 eV. A simple photodetector based on Mn doped $Cu_3N$ films was firstly fabricated via magnetron sputtering method. The fabricated device with doping of Mn demonstrated high photocurrent response and fast response shorter than 0.1 s both for rise and decay time superior to the pure $Cu_3N$. Furthermore, the energy levels of Mn-doped Cu3N matched well with ITO and Ag electrode. The excellent photoelectric properties reflect a good balance between sensitivities and response rate. Our investigation reveals the excellent potential of Mn-doped $Cu_3N$ films for application of photodetectors.

• ETRI Journal
• /
• v.35 no.4
• /
• pp.594-602
• /
• 2013

This paper proposes printed organic one-time programmable read-only memory (PROM). The organic PROM cell consists of a capacitor and an organic p-type metal-oxide semiconductor (PMOS) transistor. Initially, all organic PROM cells with unbroken capacitors store "0." Some organic PROM cells are programmed to "1" by electrically breaking each capacitor with a high voltage. After the capacitor breaking, the current flowing through the PROM cell significantly increases. The memory data is read out by sensing the current in the PROM cell. 16-bit organic PROM cell arrays are fabricated with the printed organic PMOS transistor and capacitor process. The organic PROM cells are programmed with -50 V, and they are read out with -20 V. The area of the 16-bit organic PROM array is 70.6 $mm^2$.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.393-395
• /
• 2009

We fabricated oxide and oxide/organic hybrid TFTs on a glass substrate using the photolithography process under $200^{\circ}C$. We adopt the solution processed organic ferroelectric materials of P(VDF-TrFE) and polyimide (KSPI) insulator for 1-T structure memory and flexible device, respectively. All devices have successfully operated and showed the possibility of hybrid TFTs for the application to the flexible electronic devices.

• Proceedings of the IEEK Conference
• /
• 2004.06b
• /
• pp.493-496
• /
• 2004

Recently, organic thin films are widely used to the application of organic optoelectronic devices such as OLED, OTFT, organic solar cell, and organic laser, etc. The electrical transport of organic thin film is very important to determine the performance and thus should be analyzed for analysis of operation and design of devices. However, there have been rarely known about the electrical transport of organic thin films. As an example pentacene is known to be a good organic semiconductor to produce the best performance in OTFT at the present. But the performance is varied depending on the position of source/drain contacts and gate surface states and the thickness of thin film. Therefore, it is necessary to investigate the effects of the above-mentioned factors on the electrical properties of pentacene thin film.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08b
• /
• pp.1539-1542
• /
• 2007

We have synthesized novel organic passivation materials to protect organic thin film transistors (OTFTs) from $H_2O$ and $O_2$ using polyvinyl alcohol (PVA)/layered silicate (SWN) nano composite system. Up to 3 wt% of layered silicate to PVA, very homogeneous nanocomposite solution was prepared.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.266.1-266.1
• /
• 2013

Large-scale single-crystal organic nanowire arrays were generated using a direct printing method (liquidbridge- mediated nanotransfer molding) that enables the simultaneous synthesis, alignment and patterning of nanowires from molecular ink solutions. Using this method, single-crystal organic nanowires can easily be synthesized by self-assembly and crystallization of organic molecules within the nanoscale channels of molds, and these nanowires can then be directly transferred to specific positions on substrates to generate nanowire arrays by a direct printing process. Repeated application of the direct printing process can be used to produce organic nanowire-integrated electronics with two- or three-dimensional complex structures on large-area flexible substrates. This efficient manufacturing method is used to fabricate all-organic nanowire field-effect transistors that are integrated into device arrays and inverters on flexible plastic substrates.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.483-484
• /
• 2006

In this paper, we fabricated the organic bi-stable devices under the different condition from the other groups and analyzed the electrical characteristics. Then we investigated the effects of the device structure such as organic layer thickness, middle metal layer thickness and middle metal layer deposition rate on the memory characteristics.

• Bulletin of the Korean Chemical Society
• /
• v.24 no.12
• /
• pp.1862-1864
• /
• 2003