• 한국ITS학회:학술대회논문집
• /
• 한국ITS학회 2008년도 제7회 추계학술대회 및 정기총회
• /
• pp.517-518
• /
• 2008

• Journal of Magnetics
• /
• 제10권2호
• /
• pp.63-65
• /
• 2005

The $^1H$ NMR spin-lattice relaxation in a series of the organic-inorganic hybrid systems $(C_nH_{2n+1}NH_3)_2SnCl_6$ (n = 8, 10, 12, 14) undergoing two successive phase transitions was studied. A discontinuity characteristic of a first order phase transition was observed at the high-temperature conformational transition. Besides, the spin-lattice relaxation rate below the conformational transition temperature was well fitted by four types of molecular motions, from which the chain-length dependence of the activation energies of the molecular groups was obtained.

• 폴리머
• /
• 제24권3호
• /
• pp.389-398
• /
• 2000

폴리카보네이트 표면에 spin-coating한 유/무기 복합 코팅막을 자외선 경화와 가열(12$0^{\circ}C$, 12시간)처리함으로써 약 4~13 $\mu\textrm{m}$ 두께의 투명한 내마모성 유/무기 복합코팅막을 제조하였다. 코팅용액은 무기상과 유기상을 각각 0 : 100, 20 : 80, 30 : 70, 50 : 50, 80 : 20 중량비로 혼합한 다음 광개시제, 증감제 및 계면활성제를 첨가하여 제조하였다. 무기상은 TEOS와 실란커플링제 MPTMS을 1 : 2 혹은 2 : 1몰비로 흔합하여 졸ㆍ겔 반응으로 제조하였으며, 유기상은 2관능형 urethane acrylate 올리고머, 다관능형 TMPTA와 HDDA를 4:3:3 wt% 비율로 흔합하여 제조하였다. 유/무기복합상의 화학적 변화는 FT-IR, $^{29}$ Si-NMR로 분석하였으며, 열분석과 코팅층 표면 형상은 TGA/DSC, SEM, AFM으로 분석하였다. 무기물의 함량과 실란커플링제의 첨가량이 증가 할수록 분자수준의 흔화도가 개선되고 표면 평활도와 내마모성도 향상되었다. 즉 약 10 $\AA$ 이하의 표면 거칠기와 약 15$0^{\circ}C$의 T$_{g}$를 나타내는 시료는 500회 마모시험 전후 단지 16%의 광투과도 감소만을 보인 반면에, 무코팅 폴리카보네이트를 46%의 광투과율 감소를 나타내었다..

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2003년도 춘계학술발표강연 및 논문개요집
• /
• pp.18-18
• /
• 2003

Natural clays are composed of oxide layers whose thickness is about 1nm and cations existing between the layers. A number of these layers makes primary particles with a height of about 8∼10nm and these primary particles make aggregates with a size of about 0.1∼10$\mu\textrm{m}$. When layered silicate was made to be organophilic, by exchanging the interlayer cations with organic cationic molecules, the matrix polymer can penetrate between the layers to give a nanocomposite, where 1nm-scal clay layers exist separately in a continuous polymer matrix. These nanostructured hybrid organic-inorganic composites have attracted the great interest of researchers over the last 10 years. They exhibit improved performance properties compared with conventional composites, because their unique phase morphology by layer intercalation or exfoliation maximizes interfacial contact between the organic and inorganic phases and enhances interfacial properties. Since the advent of nylon-6/montmorillonite nanocomposite developed by Toyota Motor Co., the studies on layered silicate-polymer nanocomposites have been successfully extended to other polymer systems. They greatly improved the thermal, mechanical, barrier, and even the flame-retardant properties of the polymers.

• 접착 및 계면
• /
• 제7권4호
• /
• pp.32-38
• /
• 2006

A series of organic-inorganic hybrids, PCL/EP/$SiO_2$, involving epoxy resin and triethoxysilane-terminated polycaprolactone elastomer (PCL-TESi) were prepared via polymerization of diglycidyl ether of bisphenol A (DGEBA) with amine curing agent KB-2 and sol-gel process of PCL-TESi. The curing reactions were started from the initially homogeneous mixture of DGEBA, KB-2 and the PCL-TESi. The organicinorganic hybrids containing up to 4.95% (wt) of $SiO_2$ were obtained and characterized by FT-IR, transmission electron microscopy (TEM), differential scanning calorimetry (DSC) and thermogravimetry analysis (TGA). It was experimentally shown that the swelling property in toluene, morphologies and thermal properties of the resulting hybrids were quite dependent on the contents of $SiO_2$. The crosslink network density decreases with increasing of the PCL-TESi. And in TEM, the phase separated morphology of these hybrids was found, which resulted from the coagulation of Si-O-Si networks resulting from $-Si(OC_2H_5)_3$ of PCL-TESi self-curing by hydrolytic silanol condensation, with the advancement of the curing reaction in the modified epoxy resin systems. Meanwhile, the change of the $SiO_2$ content made the morphologies changed from aggregated particles of Si-O-Si in the hybrid to nanocluster of interconnected Si-O-Si particles, then to aggregated Si-O-Si dispersing in the continuous cured epoxy phase again, and last to co-continuous interpenetrating network. The glass transition behavior of the hybrid material was cooperative motion of large chain segments, which were hindered by the inorganic Si-O-Si network. And in TG analysis, the characteristic temperature at 5% of weight loss was evidently increased from $120.5^{\circ}C$ of pure cured epoxy to $277.6^{\circ}C$ of 3.84% (wt) of $SiO_2$ modified epoxy due to the existence of Si-O-Si when PCL-TESi was added in the hybrid.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2003년도 추계학술발표강연 및 논문개요집
• /
• pp.135-135
• /
• 2003

The fast evolution in the fold of optical communication systems demands powerful optical information treatment. These functions can be performed by integrated optical systems. A key component of such systems is erbium doped waveguide amplifier(EDWA). The intra 4f radiative transition of Er at 1.5 $\mu\textrm{m}$ is particularly interesting because this wavelength is standard in optical telecommunications. The fabrication of waveguide amplifier for integrated optics using sol-gel process has received an increasing attention. Potential advantage of lower cost by less capital equipment and easy processing makes this process an attractive alternatives to conventional technologies like flame hydrolysis deposition, ion exchange and chemical vapor deposition, etc. In addition, sol-gel process has been found to be extremely suitable for the control of composition and refractive index related directly with optical properties. The main drawback of such an amplifier with respect to the EDWA is the need for a much higher Er3+ concentration to compensate for the smaller interaction length. However, the high doping of Er might be resulted in the non-radiative relaxation by clustering of Er ions End co-operative upconversion. In order to solve this problem, we investigate the possibility of avoiding short Er-Er distances by encapsulation of Er3+ ions in hosts such as organic-inorganic hybrid materials. For inorganic-organic hybrid sols, methacryloxypropyltrimethoxysilane (MPTS), zirconyl chloride octahydrate and erbium(III) chloride hexahydrate were used as starting materials, followed by conventional sol-gel process. It was observed by TEM that nano sols having core/shell toplology were formed, depending on the mole ratio of Zr/Er. The surface roughness for the coatings on Si substrate was investigated by AFM as a function of Zr/Er ratio. The local environment and vibrational Properties of Er3+ ions were studied using Near-IR, FT-IR, and UV/Vis spectroscopy. Nano hybrid coatings derived from polymer and Er doped encapsulation Eave the good luminescence at 1.55$\mu\textrm{m}$.

• 반도체디스플레이기술학회지
• /
• 제16권2호
• /
• pp.19-26
• /
• 2017

The cure properties of ethoxysilyl bisphenol A type epoxy resin (Ethoxysilyl-DGEBA) systems with different hardeners were investigated, comparing with DGEBA and Diallyl-DGEBA epoxy resin systems. The cure kinetics of these systems were analyzed by differential scanning calorimetry with an isothermal approach, and the kinetic parameters of all systems were reported in generalized kinetic equations with diffusion effects. The Ethoxysilyl-DGEBA epoxy resin system showed lower cure conversion rates than DGEBA and Diallyl-DGEBA epoxy resin systems. The conversion rates of these epoxy resin systems with DDM hardener are lower than those with HF-1M hardener. It can be considered that the optimum hardener for Ethoxysilyl-DGEBA epoxy resin system is Phenol Novolac type. These lower cure conversion rates in the Ethoxysilyl-DGEBA epoxy resin systems could be explained by the retardation of reaction molecule movements according to the formation of organic-inorganic hybrid network structure by epoxy and ethoxysilyl group in Ethoxysilyl- DGEBA epoxy resin system.

• 공업화학
• /
• 제33권2호
• /
• pp.133-144
• /
• 2022

Fast-paced industrial and agricultural development generates large quantities of hazardous heavy metals (HMs), which are extremely damaging to individuals and the environment. Research in both academia and industry has been spurred by the need for HMs to be removed from water bodies. Advanced materials are being developed to replace existing water purification technologies or to introduce cutting-edge solutions that solve challenges such as cost efficacy, easy production, diverse metal removal, and regenerability. Water treatment industries are increasingly interested in activated carbon because of its high adsorption capacity for HMs adsorption. Furthermore, because of its huge surface area, abundant functional groups on surface, and optimal pore diameter, the modified activated carbon has the potential to be used as an efficient adsorbent. Metal-organic frameworks (MOFs), a novel organic-inorganic hybrid porous materials, sparked an interest in the elimination of HMs via adsorption. This is due to the their highly porous nature, large surface area, abundance of exposed adsorptive sites, and post-synthetic modification (PSM) ability. This review introduces PSM methods for MOFs, chemical modification of activated carbons (ACs), and current advancements in the elimination of Pb²⁺, Hg²⁺, and Cd²⁺ ions from water using modified MOFs and ACs via adsorption.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.257-257
• /
• 2010

One of the critical issues for applications of flexible organic thin film transistors (OTFTs) for flexible electronic systems is the electrical stabilities of the OTFT devices, including variation of the current on/off ratio ($I_{on}/I_{off}$), leakage current, threshold voltage, and hysteresis, under repetitive mechanical deformation. In particular, repetitive mechanical deformation accelerates the degradation of device performance at the ambient environment. In this work, electrical stabilities of the pentacene organic thin film transistors (OTFTs) employing multi-stack hybrid encapsulation layers were investigated under mechanical cyclic bending. Flexible bottom-gated pentacene-based OTFTs fabricated on flexible polyimide substrate with poly-4-vinyl phenol (PVP) dielectric as a gate dielectric were encapsulated by the plasma-deposited organic layer and atomic layer deposited inorganic layer. For cyclic bending experiment of flexible OTFTs, the devices were cyclically bent up to $10^5$ times with 5mm bending radius. In the most of the devices after $10^5$ times of bending cycles, the off-current of the OTFT with no encapsulation layers was quickly increased due to increases in the conductivity of the pentacene caused by doping effects from $O_2$ and $H_2O$ in the atmosphere, which leads to decrease in the $I_{on}/I_{off}$ and increase in the hysteresis. With encapsulation layers, however, the electrical stabilities of the OTFTs were improved significantly. In particular, the OTFTs with multi-stack hybrid encapsulation layer showed the best electrical stabilities up to the bending cycles of $10^5$ times compared to the devices with single organic encapsulation layer. Changes in electrical properties of cyclically bent OTFTs with encapsulation layers will be discussed in detail.

• 한국재료학회지
• /
• 제29권10호
• /
• pp.631-638
• /
• 2019

As automation systems become more common, there is growing interest in functional labeling systems using organic and inorganic hybrid materials. Especially, the demand for thermally and chemically stable labeling paper that can be used in a high temperature environment above $300^{\circ}C$ and a strong acid and base atmosphere is increasing. In this study, a composite coating solution for the development of labeling paper with excellent thermal and chemical stability is prepared by mixing a silica inorganic binder and titanium dioxide. The silica inorganic binder is synthesized using a sol-gel process and mixed with titanium dioxide to improve whiteness at high-temperature. Adhesion between the polyimide substrate and the coating layer is secured and the surface properties of the coating layer, including the thermal and chemical stability, are investigated in detail. The effects of the coating solution dispersion on the surface properties of the coating layer are also analyzed. Finally, it is confirmed that the developed functional labeling paper showed excellent printability.