• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.57 no.2
• /
• pp.181-185
• /
• 2008

In this paper, we investigates accident actual conditions of electric outlet for low voltage that is used into interior and clear hazardous factor. Electric outlet for general can know that melting of socket-outlet and carbonization of support occur if a contaminant becomes burnout because is flowed in. Existent outlet consists of structure that special quality is good but inflow of a contaminant is easy when is dry. But, waterproof outlet passes silicon layer and have connected structure plug. As developed outlet covers whole surface and back side, interval was shut. Safety pin of developed outlet was established to operate to vertical direction. Therefore, we estimate that contribute on prevention of electrical disaster if use developed outlet to a restaurant, a laundry, a laboratory etc.

• Journal of Distribution Science
• /
• v.14 no.4
• /
• pp.93-101
• /
• 2016

Purpose - As more consumers pursue high quality products at reasonable prices, Korean retail companies are increasing investment in expanding their outlet stores. Despite the growing importance of the outlet business, there has been very little empirical research on consumers' outlet shopping behaviors. This study aimed to investigate the relationships between consumers' perceived product value (performance quality, value for money, and social value) of outlet stores and overall shopping satisfaction and the effect of shopping satisfaction on outlet store loyalty. Research design, data and methodology - The authors developed a structural model in which performance quality, value for money, and social value of products are proposed to affect overall outlet shopping satisfaction, thus increasing customer loyalty. To analyze the research model, data were collected from 88 shoppers at suburban outlets. SPSS 21.0 and AMOS 21.0 were utilized to test the hypotheses. The unidimensionality of each construct was supported from the results of the reliability test with Cronbach's α and confirmatory factor analyses. Correlation analysis was performed and the results warranted the nomological validity of the measures. The fit statistics of the overall model analysis demonstrated an acceptable fit(X²(₁₆₁)=171.651, p=.000; X²/df=1.546; GFI=.821, NFI=.879, TLI=.942, CFI=.953, RMR=.035, RMSEA=.079). Results - The findings are as follows. First, consumers' perceived value of product performance quality had a significant positive effect on overall outlet shopping satisfaction. Consumers, who evaluate performance quality of the product more positively, tend to express stronger satisfaction and happiness about outlet shopping experience. Second, consumers' perceived social value of outlet products influenced their overall satisfaction significantly. Consumers who believe that products of outlet stores enhance self-concepts are more likely to satisfy with outlet shopping experience. However, consumers' perception of outlet products on value for money was not found to significantly influence overall shopping satisfaction. Finally, overall shopping satisfaction had a significant and positive influence on loyalty. Conclusions - While outlet retailers have traditionally focused on promoting competitively priced merchandise, the results of this study suggest that customers' overall satisfaction with outlet shopping is influenced more by the non-price-related product values. In the context of an outlet shopping environment, performance quality and social value of the products were found to be more critical predictors of customer overall satisfaction. Therefore, it would not be efficient for outlet retailers to highlight economic value of their merchandise. Instead, they need to investigate the performance quality of the products regularly and try to deliver quality guaranteed goods to enhance customer satisfaction. Also, outlet retailers should differentiate their businesses by carrying more unique and prestigious brands and emphasize higher social value and symbolic meanings of their products. As competition among outlet retailers are getting fierce, retail companies need to focus on strengthening customer loyalty with a long-term perspective. With a deeper understanding of the relationship between consumers' perceived product values and shopping satisfaction, outlet retailers will be able to develop customer loyalty strategies effectively and to achieve competitive advantage.

• The Research Journal of the Costume Culture
• /
• v.3 no.2
• /
• pp.409-424
• /
• 1995

This study intends to investigate the actual state and problems of Outlet, and the research consumer's perception of Outlet. It affords a effective way to get rid of inventories for manufacture and to economize and rational buying for consumer. Ultimately trying to find a effective managing method of Outlet for both manufacturers and consumers. The result about research the actual sate of Outlet, there are affluent assortment, generous amount of merchandise and high discount rate in Kuro-dong Outlet stores, but stores' location is scattered that makes shopping environment inconvenient. It is not good condition of assortment, quantity and freshness of merchandise in Mungung-dong Outlet stores, but close proximity between stores and fancy shopping place make convenient shopping possible. Multi-discount stores dilute the fundumental of Qutlet with poor quantity and assortment of merchandise make man choices possible for consumer, but discount rate is lower for high management cost. The result about research the consumer's perception of Outlet shows that consumer have enough interest in Outlet, and intention to continue shopping in Outlet. Therefore we can expect continuous growth of Outlet. Also consumer is satisfied with price and quality of merchandise, but they are not satisfied with assortment of merchandise, expecially poorness in sizes.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.13 no.11
• /
• pp.1149-1155
• /
• 2001

The experimental investigation on energy separation in a vortex tube has been carried out to sow the effect of inlet and outlet pressures with various working fluids(air,$O_2,\;and\; CO_2$). Those outlet pressure means cold outlet and hot outlet pressure which were set equally. The results showed that the total enthalpy variation became a maximum when the mass flow rate at the cold outlet was a half of the total mass flow rate in the vortex tube (y=0.5). The total enthalpy variation was quite affected by the pressure difference between the inlet and outlet of vortex tube when the ratio of the inlet pressure to the cold outlet pressure remained constant. Although specific enthalpy differences between the inlet and the outlet (both cold and hot outlet) did not noticeably vary with the pressure difference, the specific enthalpy difference between the inlet and cold outlet was dominantly affected by physical properties of working gases.

• Journal of Biosystems Engineering
• /
• v.15 no.4
• /
• pp.310-318
• /
• 1990

The amount of grain loss incurred during harvesting operation through the chaff-outlet of combine may not be negligible. To minimize this grain loss and optimize condition of combining, it may be necessary that the amout of chaff-outlet loss dependent on varying crop condition is to be estimated as exactly as possible. This study was thus intended to develop the monitor that could indicate the amount of grain lost through the chaff-outlet of combine during haravesting operation, and to find out driving and operating method of combine that could reduce chaff-outlet loss. In the study(1), the frequency distributions of each sound generated by the impact of kernels and chaff, the sound generated by the impact of the mixture of kernels and chaff, and vibration or noise created by the combine engine and other moving parts were investigated experimentally. Based on the results of frequency analyses, the loss monitor was developed which could measure the impact sound of paddy kernels that could be distinguished from those of other threshing products through chaff-outlet, and from vibration or noise created by the combine engine and other moving parts. Also in this study, detecting capability of monitor was tested by comparing the amount of grain lost through chaff-outlet with the amount of grain detected by the loss monitor, and changes in chaff-outlet grain loss on the increase of traveling speed, location of chaff-outlet loss control plate and variety of paddy rice were measured using the loss monitor. The monitor developed in this study efficiently measured the amount of grain lost through the chaff-outlet of combine. It was found that the chaff-outlet grain loss ratio was affected greatly by the variety of paddy rice, the location of chaff-outlet loss control plate and traveling speed of combine.

• The Journal of the Korea Contents Association
• /
• v.11 no.11
• /
• pp.401-412
• /
• 2011

The premium outlets have come into the spotlight as the new type of shopping facility different from the typical ones. Along with both the economical consumption trend and high-end brand preference of consumers, the development of outlet shopping center has become an important issue for many retail facility development companies in Korea, This study examines the shopping behavior of potential customers to build up the basic information (preliminary data) for successful development of premium outlet. To achieve this research purpose, this study surveys 1,300 consumers of Seoul and metropolitan area residents, and analyzes survey data by using PASW 18.0. This study shows various shopping behavior of outlet shoppers such as visiting frequency, reason for visiting, shopper group size, time spent in outlet, past shopping experience, luxury-brand shopping experience and so on. This study classifies outlet shoppers into premium outlet shoppers and general outlet shoppers and examines their shopping behavior. This study suggests meaningful insights for outlet shopping center developer.

• Journal of KSNVE
• /
• v.9 no.4
• /
• pp.738-746
• /
• 1999

The performance of muffler can be improved for a frequency range of interest by moving inlet and outlet locations. And optimal location of inlet and outlet can be determined to improve the acoustic performance. The optimum design using FEM, however, may take a very long time and be very hard to take inlet and outlet locations as design variables. In this paper, the acoustic performance of reactive type single expansion chamber muffler is predicted using higher order mode theory. The sensitivity analysis of transmission loss with respect to the location of inlet and outlet is suggested. And the acoustic power transmission coefficient for a frequency of interest is used as cost function. Optimum location of inlet and outlet is determined to minimize cost function by using SUMT algorithm.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.23 no.2
• /
• pp.67-75
• /
• 2013

In order to improve osseo-integration of a dental implant with bone crystal we studied an implant with holes inside its body to deliver bioactive materials based on a proposed patent. After bioactive material is absorbed, bone crystal can grow into holes to increase implant bonding in addition to surface integration. The larger cross section area of outlet holes showed the less values of the maximum stress, and the stress concentrations near the uppermost outlet holes were also reduced with an increasing number of outlet holes. The conclusion, that the uppermost outlet design improvement was most effective to reduce the stress concentration and improve the growth rate of bone crystal, could be drawn. After the design optimizations, Type 6-C had provided the best results in this study. The overall shape optimization studies on the shape, location, number, and so on, of the outlet holes, should be carried out further.

• Journal of Magnetics
• /
• v.16 no.3
• /
• pp.281-287
• /
• 2011

The stationary discontinuous armatures that are used in permanent magnet linear synchronous motors (PM-LSMs) have been proposed as a driving source for transportation systems. However, the stationary discontinuous armature PM-LSM contains the outlet edges which always exist as a result of the discontinuous arrangement of the armature. For this reason, the high alteration of the outlet edge cogging force produced between the armature's core and the mover's permanent magnet when a mover passes the boundary between the armature's installation part and non-installation part has been indicated as a problem. Therefore, we have examined the outlet edge cogging force by installing the auxiliary teeth at the armature's outlet edge in order to minimize the outlet edge cogging force generated when the armature is arranged discontinuously. Moreover, we obtained the calculation by analyzing the shape of the auxiliary teeth in which the outlet edge cogging force is minimized the most.

• Journal of Korea Water Resources Association
• /
• v.36 no.5
• /
• pp.811-821
• /
• 2003

In this study is if the design of outlet conduit was appropriate or not by analyzing flow characteristic of outlet conduit with performing hydraulic model experiments. As the results of hydraulic model experiments, the capacity of outlet conduit of elementary design was under estimated, and the designed values of the capacity of outlet conduit of preliminary design based on the values of elementary design was nearly equal to the values of experiments, so the propriety of design was identified. In addition, as the results of examinations of negative pressure of outlet conduit, and propriety of longitudinal sections, the resulting values were within the maximum permissible limits, so it was proved that the design was appropriate. In the base of such processes, the propriety of scale and location of outlet conduit of preliminary design was examined.