• 한국생산제조학회지
• /
• 제24권3호
• /
• pp.314-319
• /
• 2015

Invar is a compound metal of Fe-Ni system contained 36.5% Ni. The characteristic of invar is that the coefficient of thermal expansion is $1.0{\times}10^{-6}cm/^{\circ}C$. It is approximately 10 times smaller than series of steel. Because of this low thermal expansion characteristic of Invar, it is used to shadow mask of display device such as UHDTV or OLED TV. In this study, pulse current from pulse generator instead of DC current is used to overcome the disadvantages of the conventional electrochemical machining. Pulsed current with different duty factor in PECM affect the precise geometry. Pulse electrochemical machining is conducted to machine the micro hole to the invar sheet with different duty factor. The machined shape and overcut of invar sheet with different duty factor is observed by optical microscope and scanning electron microscope (SEM).

• 한국CDE학회논문집
• /
• 제15권4호
• /
• pp.253-260
• /
• 2010

This paper presents algorithms for computing offsets of freeform curves. The approach first divides the original curve into several segments at the inflexion points. Based on the obtained new control polygon and its offsets, quadratic trigonometric splines are constructed to approximate the offset curves. Finally, the shape parameter value of trigonometric spline is determined to satisfy the required tolerance. The degree of the output curve is two, independent of the original curve's degree. Because of the great controllability, the proposed method can generate a completely overestimating offset curve by adjusting the value of the shape parameter, which guarantees no overcutting in NC machining. Furthermore, it also produces the lowest number of control points compared with other works.

• 한국정밀공학회지
• /
• 제20권9호
• /
• pp.40-46
• /
• 2003

Synchronizing errors between the spindle motor and the z-axis motor directly influences the cutting characteristics and the thread quality in tapping, because the tapping process is accomplished by synchronizing the movement of the z-axis with the revolutionary spindle motion. Generally synchronizing errors are decided by tile parameters of the servo system and commanded velocity. The excessive synchronizing errors which are induced by the parameter mismatch and high cutting velocity can cause tap breakage due to the abrupt increase of cutting torque or damage the thread accuracy by overcutting the already cut threads. In this paper, the influences of the synchronizing errors on the tapping characteristics in the ultra high-speed tapping will be described and a minimum level of synchronizing errors necessary to maintain the quality of the cut thread will be presented.

• 대한산업공학회지
• /
• 제24권4호
• /
• pp.601-611
• /
• 1998

The machining accuracy of CNC machine tools will decrease the production lead time because the coordinate compensation of the tool path will be unnecessary to meet design specifications. Improving the accuracy of machined parts enhances the reliability and functionality of the assembly as well as the life of the product. Among various factors affecting the accuracy of machined parts, the ambient temperature is the major factor that refers to the temperature surrounding the machine and workpiece. In this study, an experiment was conducted to confirm the dimensional variations caused by changes in the ambient temperature. The ambient temperature resulted in overcutting when it increased. A developed pre-processor converts the CNC program to compensate the dimensional variations caused by temperature changes. This methodology can be used to determine the machining accuracy and improve the positioning accuracy of a machine tool.

• 한국정밀공학회지
• /
• 제32권8호
• /
• pp.705-711
• /
• 2015

Five-Axis machines can generate undesirable defects such as the undercutting and overcutting errors that frequently occur in the three-axis machining process. It is therefore necessary to develop a program for NC-code generation, whereby the cutter posture is considered to decrease the occurrence of defects. In previous studies, the Easy-Impeller CAM(E-ICAM), an automatic CAM program used for the five-axis machining of impellers, was developed; however, when E-ICAM is used to machine an impeller, it is possible to gouge the hub and blade. Therefore, the aim of this study is the establishment of a formula for each type of endmill to minimize gouging according to the cutter posture, in consideration of several factors that affect accuracy in the machining of an impeller. This study also aimed to improve the performance and accuracy of E-ICAM in the manufacturing of impellers.

• 한국터널지하공간학회 논문집
• /
• 제23권3호
• /
• pp.167-181
• /
• 2021

터널굴착의 경제성 확보 및 굴착 시 발생하는 진동저감을 위해 워터젯 시스템을 활용한 새로운 형태의 암반 굴착공법이 개발되고 있다. 워터젯 절삭을 이용한 효율적인 암반 굴착을 위해서는 워터젯 절삭폭의 중첩과정이 필수적이다. 본 연구는 초고압 연마재 워터젯 시스템을 이용하여 절삭폭 중첩도 및 이격거리에 따른 화강암 시편 절삭실험을 수행하였다. 실험결과를 바탕으로 중첩도 단계에 따른 화강암 절삭성능을 분석하였다. 그리고 형상인자를 절삭깊이, 절삭폭, 그리고 절삭부피로 분류하여 중첩 절삭 후 단면의 형상을 분석하였다. 절삭폭 중첩도가 58% 이하가 되면 중첩이 충분하지 않아 연속적인 암반제거가 불가능하였다. 반면 절삭폭 중첩도 67% 이상에서는 과절삭 현상이 확인되었다. 한편 부분중첩(25~75%) 조건에서는 기존 워터젯 절삭에 비해 효율적인 부피제거가 가능한 것으로 분석되었다. 해당 연구는 워터젯을 활용한 암반 굴착 시 최적 중첩도를 결정하기 위한 중요한 기초자료로 활용될 수 있을 것으로 기대된다.