• 제목/요약/키워드: PC Camera

검색결과 338건 처리시간 0.031초

네트워크 카메라 기반 인스턴트 메신저의 개발에 대한 연구 (Development of Network Camera-based Instant Messenger)

  • 이강석;염창선
    • 산업경영시스템학회지
    • /
    • 제33권2호
    • /
    • pp.133-139
    • /
    • 2010
  • PC camera-based instant messenger have problems of video image break/delay and noise. The reason is caused by a composed problem that PC Camera is belong to the connected PC and operating in the PC. This research suggests an instant messenger that uses network camera connected to LAN instead of PC camera. Therefore, the instant messenger has a component that the camera is separated from PC. This research designs sequence diagram, video calls flow chart, and graphic user interface of the instant messenger. The instant messenger based on network camera provides high quality video calls service and makes it possible to call from a special remote site with real-time video image.

퍼지제어를 이용한 얼굴추적 카메라 구동 시스템의 설계 및 구현 (Design and Implementation of Driving System for Face Tracking Camera using Fuzzy Control)

  • 이종배;임준홍
    • 전자공학회논문지SC
    • /
    • 제40권3호
    • /
    • pp.127-134
    • /
    • 2003
  • 본 논문에서는 퍼지제어를 이용하여 사람의 얼굴을 추적하는 카메라를 구동하는 시스템을 구현한다. 팬틸트(Pan Tilt)구조를 가진 카메라 시스템은 먼저 영상을 PC로 보내고 PC에서는 추적알고리즘에 의한 추적 좌표를 다시 카메라에 전송하면 카메라는 목표 얼굴을 실시간으로 추적하는 방식으로 되어 있다. 카메라를 구동하는 2축의 스텝모터는 PC에서 전송된 목표 좌표로 최대한 빠르고 또한 부드럽게 제어되어야 한다. 이를 위해서 본 논문에서는 퍼지제어기를 제안하여 구동용 가·감속 주파수를 만들고 두 축의 스텝모터를 빠르면서도 부드럽게 제어한다 그리고 본 제안 방식의 효율성을 검증하기 위하여 실험 장치를 제작하고 실험을 수행한다.

PC 카메라에서 추출한 이미지를 이용한 수화인식 (Recognition of Finger Language using Image from PC Camera)

  • 이병환;이기성
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2004년도 심포지엄 논문집 정보 및 제어부문
    • /
    • pp.102-104
    • /
    • 2004
  • Finger language is a typical tool for deaf persons. But learning the finger language for non-handicapped persons is very difficult. To overcome these difficulties, a new communication method using visual function is developed recently. Even though the developed system uses the visual function, it needs expensive equipments such as camera and computer. To be used in the real environments, the cost of equipments is a critical factor. If the recognition system for the finger language can be developed with low price equipments, the system can be used in the notebook or cellular phone. The image captured by PC camera was processed by preprocessing algorithm. To recognize the finger language, the resulting image was divide into $5{\times}5$ sections. The recognition system uses a similarity method and position information. The simulation results shows the effectiveness of the proposed algorithm.

  • PDF

미량확산법에 의한 휘발성염기질소 분석에서 PC카메라를 이용한 자동적정 (Automatic Titration Using PC Camera in Volatile Basic Nitrogen Analysis by Microdiffusion Method)

  • 이형춘
    • 한국식품영양과학회지
    • /
    • 제34권1호
    • /
    • pp.135-137
    • /
    • 2005
  • 미량확산법에 의한 휘발성염기질소 분석에서 PC카메라를 이용하여 자동적정하기 위하여 자동적정시스템을 구성하였으며, 자동적정프로그램을 작성하였다. 자동적정방법은 피적정액 화상 중 마우스 포인터에 의하여 지정된 화소의 Green값과 Red값이 적정종말점에서 서로 반전되는 것을 이용하였다. 돈육시료를 사용하여 실험한 결과 부패도가 다른 모든 시료에서 자동적정과 수동적정간에 유의차가 인정되지 않았으며, 서로간에 높은 상관성이 있었고 잘 일치하였다.

무인가공을 위한 PC 카메라 기반의 모니터링 (PC-Camera based Monitoring for Unattended NC Machining)

  • 송시용;고기훈;최병규
    • 산업공학
    • /
    • 제19권1호
    • /
    • pp.43-52
    • /
    • 2006
  • In order to make best use of NC machine tools with minimal labor costs, they need to be in operation 24 hours a day without being attended by human operators except for setup and tool changes. Thus, unattended machining is becoming a dream of every modern machine shop. However, without a proper mechanism for real-time monitoring of the machining processes, unattended machine could lead to a disaster. Investigated in this paper are ways to using PC camera as a real-time monitoring system for unattended NC milling operations. This study defined five machining states READY, NORMAL MACHINING, ABNORMAL MACHINING, COLLISION and END-OF-MACHINING and modeled them with DEVS (discrete event system) formalism. An image change detection algorithm has been developed to detect the table movements and a flame and smoke detection algorithm to detect unstable cutting process. Spindle on/off and cutting status could be successfully detected from the sound signals. Initial experimentation shows that the PC camera could be used as a reliable monitoring system for unattended NC machining.

PC카메라와 일반광학현미경을 이용한 빵효모 배양액의 효모세포 자동계수 (Automatic Counting of Yeast Cells in Baker's Yeast Culture Using PC Camera and Conventional Light Microscope)

  • 이형춘
    • KSBB Journal
    • /
    • 제26권1호
    • /
    • pp.87-91
    • /
    • 2011
  • Automatic counting of yeast cells in baker's yeast culture was tried using a conventional light microscope equipped with a pc camera. Relatively good binary image was obtained by using white LED as microscope light source, but uneven brightness distribution in original image hindered counting accuracy. A block binarization method using local thresholds proportional to local brightnesses was used to get improved binary images. The brightnesses of the blocks were expressed as the value component in HSV color model. Good quality binary images were obtained by binarization on $8{\times}6$ blocks of original images and connected-component labelling of the binarized images produced reliable counting results in the concentration range $1.4{\times}10^5/mL{\sim}1.4{\times}10^7\;cells/mL$.

Development of Analysis Module for Marine Traffic Information Using PC Camera

  • Moon Serng-Bae;Lee Geun-Sil;Jun Seung-Hwan
    • 한국항해항만학회지
    • /
    • 제29권4호
    • /
    • pp.313-318
    • /
    • 2005
  • Usually marine traffic survey has been conducted by some methods like an ocular observation using portable RADAR, a questionnaire, etc. But these should have expended a lot of manpower and expenses. In this paper, we have developed new observation module which could capture the RADAR image using PC camera simply, and allowed as to track targets on the PC monitor directly. And it has been programmed to make a database of RADAR image, target's track and information, and analyze the marine traffic tendency in various ways like vessel number crossed over gate line, vessel's velocity distribution in gate line, traffic density distribution, etc. We have confirmed that this module could observe and analyze the marine traffic efficiently and economically through several on-the-spot experiments.

퍼지제어를 이용한 이동 물체 추적 스테레오 카메라 시스템 (Moving Object Tracking using Fuzzy Control of Stereo Camera System)

  • 염승훈;유제연;김진환;허욱열
    • 전기학회논문지
    • /
    • 제59권8호
    • /
    • pp.1436-1440
    • /
    • 2010
  • In this paper, we proposed that stereo camera system using fuzzy control for moving object tracking. We extract some features of the moving object from overall image. This informations send to the PC and the PC calculate the coordinate of the object in the image frame. To make the object set in the middle of the image, the step motor should be controlled accurately and rapidly with the location information received by the PC. Then we design a fuzzy logic system for controlling stereo camera system. To verify the better performance of the proposed algorithm, we exemplified by experimental results.

범용 USB PC 카메라를 이용한 얼굴 특징점의 추적 (Facial Feature Tracking from a General USB PC Camera)

  • 양정석;이칠우
    • 한국정보과학회:학술대회논문집
    • /
    • 한국정보과학회 2001년도 가을 학술발표논문집 Vol.28 No.2 (2)
    • /
    • pp.412-414
    • /
    • 2001
  • In this paper, we describe an real-time facial feature tracker. We only used a general USB PC Camera without a frame grabber. The system has achieved a rate of 8+ frames/second without any low-level library support. It tracks pupils, nostrils and corners of the lip. The signal from USB Camera is YUV 4:2:0 vertical Format. we converted the signal into RGB color model to display the image and We interpolated V channel of the signal to be used for extracting a facial region. and we analysis 2D blob features in the Y channel, the luminance of the image with geometric restriction to locate each facial feature within the detected facial region. Our method is so simple and intuitive that we can make the system work in real-time.

  • PDF

웹 카메라 기반 홈 서버용 모니터링 기술에 관한 연구 (A Study on Monitoring Technique for Home Server based on Web Camera)

  • 정종근;천승환
    • 한국정보통신학회논문지
    • /
    • 제9권8호
    • /
    • pp.1754-1761
    • /
    • 2005
  • 사생활 보호에 대한 요구가 증가되고 있는 때 보안을 위한 모니터링 시스템의 요구는 날로 증가되고 있다. 본 논문에서는 인터넷을 통해서 PC나 PDA로 모니터링 할 수 있는 기술을 연구하였다. 마이크가 내장된 USB 카메라로 촬영한 영상과 음성 데이터를 H.263의 Multiplex를 통해서 인터넷을 통해 PC나 PDA로 전송한다. 그리고 웹 카메라 기반 홈서버용 모니터링 시스템 각 장치들의 동작 처리부를 일관된 구동 모듈로 통일하고, 관리자에게 일관된 구동 모듈을 제공하여 시스템의 운용과 관리에 있어서 편리함을 제공하였다.