• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07b
• /
• pp.1215-1217
• /
• 2005

One of the important problems in recent AC-PDP technology is the image sticking. In this research, we have investigated the PDP cell with constraint deposition MgO on phosphor, the electrical and optical properties in the PDP cell were examined. Also, we have investigated the correlation with image sticking and degraded MgO protective layer, phosphor in AC-PDP. As a result, we measured the secondary electron emission coefficient ${\gamma}$, discharge characteristics and Brightness for the constraint degraded phosphor are compared with those of nondegraded phosphor.

• 전기의세계
• /
• v.38 no.10
• /
• pp.40-44
• /
• 1989

PDP(Plasma display Panel)는 Gas 방전을 하여 발생하는 빛을 이용하여 화상 표시를 하는 flat panel display이다. PDP는 용도는 여러가지가 있지만 현재 주용도는 Computer Monitor이다. 아직 Orange색 이외의 표시색상은 개발되어 있지 않다. Computer Monitor용의 단색 PDP개발은 최근에 활발히 진행되었다. 16 계조표시가 가능한 10inch 640 * 400 Dot PDP가 DIXY, Matsushita, Oki를 비롯한 여러 회사에서 개발되어 상품화 되었다. 국내에서는 금성사, 대우, 삼성에서 현재 개발을 진행시키고 있고 최근에 삼성에서 Computer Monitor용의 640 * 400 Dot PDP가 개발되었다. 그러나 단색 PDP의 생산 시설 과잉으로 최근에는 일본의 DIXY가 도산하였다. 현재는 단색 PDP로 시장 개척에 한계를 느낀 PDP제조 업체에서 총력을 쏟아 CPT(Color Picture Tube) 대체를 위하여 Full Color PDP를 개발하고 있다.

• Proceedings of the Korean Ceranic Society Conference
• /
• 2003.04a
• /
• pp.26.1-26
• /
• 2003

• 한국정보디스플레이학회:학술대회논문집
• /
• 2000.01a
• /
• pp.115-116
• /
• 2000

Influence of sustain pulse-width on electro-luminous efficiency is experimentally investigated for surface discharge of AC-PDP. It is found that the firing voltage is decreased as the pulse-width is increased from $2\;{\mu}s$ to $8\;{\mu}s$ with sweeping frequency range of 10 kHz to 50 kHz. It has been found that the optimal sustain pulse-width is in the range of $3{\sim}4\;{\mu}s$ under driving frequency range of 30 kHz and 50 kHz, based on observations of memory coefficient, wall charge, and wall voltage as well as luminous efficiency.

• Information Display
• /
• v.3 no.6
• /
• pp.24-29
• /
• 2002

PDP에 표시되는 영상의 화질은 PDP 구매 결정에 영향을 미치는 가장 중요한 요소들 중의 하나이다. PDP에서의 화질은 주로 PDP 구동방식, 셀의 구조, 사용되는 방전가스 및 형광체의 특성, 표시 가능 화소수 등과 같은 PDP 구성 요소들에 의해 좌우된다. 이와 같은 PDP의 구성 요소들을 개선함으로서 화질을 향상시킬 수 있다. 하지만, 이미 구성 요소들이 결정되어져 있는 경우 신호 및 영상 처리 방법들을 적용함으로서 PDP에서의 화질을 개선시킬 수 있다. 본 소고에서는 PDP에서의 고화질 구현을 위한 신호 및 영상처리 기술들을 소개하기로 한다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.11
• /
• pp.3176-3182
• /
• 2009

The PBNM on MANET is being researched to ensure the reliability and efficiency between mobile nodes. Therefore, it is essential to determine the cluster effectively which will perceive the movements of nodes and distribute the policies. In PBNM mechanism, to determine the node cluster for PDP and manage PEP nodes, Active PDP Discovery Protocol is proposed as a mechanism which is more efficient than preexistent techniques. While k-hop cluster selects the PEP nodes which PDP node manages, Active PDP Discovery actively selects the PDP node among the moving PEP node. This method prevents orphan nodes that are not connected to PDP and reduces continual broadcasting messages. This paper implements Active PDP Discovery which determines cluster in the real networks and analyzes its capability, expanding COPS-PR to detect the movement of nodes and adding MNL to PDP node.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.351-355
• /
• 2003

In this paper, a new barrier rib forming method of embossed barrier rib (EBR) formation process for the PDP rear panel was introduced. The process is mainly composed of green sheet fabrication, lamination of the green sheet on the rear glass panel having data electrodes, and roll embossing followed by firing. The EBR process has two advantages over the conventional barrier rib forming methods. One is the process requires less equipment investment than the conventional methods by about 20% of the current rear panel fabrication equipment investment owing to the simplified fabrication process. The other advantage is its reduced rear panel manufacturing cost by eliminating the time consuming and complicated processes and waste of materials in the conventional methods. In this study, general procedure of EBR fabrication process is described and the characteristics of prototype PDP using EBR panel are discussed.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.75-78
• /
• 2002

Difference in the structure of AC PDP cells makes the cells have various discharge characteristics. Therefore, a ramp-reset must be adjusted for the stable driving of AC PDP. If any ramp-reset can reduce the difference in discharge characteristics between cells, the conditions of the address discharge could become almost the same. It is very important to understand these to design a good driving waveform. In this paper, we proved the mentioned facts with the change of barrier rib heights.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.04a
• /
• pp.155-158
• /
• 2000

Influence of sustain pulse-width on electro-luminous efficiency is experimentally investigated for surface discharge of AC-PDP. A square pulse with variable duty ratio and rising time of 300 ns has been used in the experiment. It is found that the firing voltage is decreased as the pulse-width is increased from 2 ${\mu}s$ to 8 ${\mu}s$ with sweeping frequency range of 10 kHz to 50 kHz. It has been found that the optimal sustain pulse-width is in the range of $3{\sim}4{\mu}s$ under driving frequency range of 30 kHz and 50 kHz, based on observation of memory coefficient, wall charge, and wall voltage as well as luminous efficiency.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2000.01a
• /
• pp.117-118
• /
• 2000

The secondary electron emission coefficient ${\gamma}$ of MgO single crystals according to the gas mixture ratio of Xe to Ne have been investigated by ${\gamma}-focused$ ion beam system. It is found that the MgO single crystals of (111) crystallinity has the highest ${\gamma}$ from 0.09(0.03) up to 0.16(0.04), while from 0.07(0.02) to 0.15(0.03) for (200) and from 0.06(0.01) to 0.13(0.02) for (220) crystallinity for operating Ne (Xe) ions ranging from 50eV to 200eV throughout this experiment. And it is found that the ${\gamma}$ ranged from 0.03 up to 0.06 for Ne-Xe mixtures are much smaller than those of 0.09 up to 0.16 for pure Ne ions under accelerating voltage ranged from 50V to 200V.