• Journal of Adhesion and Interface
• /
• v.3 no.3
• /
• pp.15-21
• /
• 2002

The modified polyethylene(m-PE) films were prepared from aqueous dispersions which were synthesized by reacting poly(ethylene-co-methylacrylate) with aqueous KOH and ammonia solution to attach -COOK, $CONH_2$, and COOH as pendent groups in the polyethylene backbones. Thermal, tensile and heat-seal properties were measured to investigate the effect of the pendent groups. Endothermic peaks on DSC curves were affected by the thermal history of the samples and a melting peak was observed at around $86^{\circ}C$ on the second heating curve while three melting peaks were shown on the first heating curve. A minimum value of tensile strength was shown at 70 mole% of COOK based on pendent groups. Tensile modulus increased with increasing the amide content in pendent groups. The m-PE films were heat-sealed at lower temperature than LDPE films and showed a minimum heat seal strength at around 70 mole% COOK content in pendent groups.

• Applied Chemistry for Engineering
• /
• v.3 no.4
• /
• pp.595-604
• /
• 1992

Carbonate-type polyurethane resins containing anionic moieties were systhesized from NCO-terminated prepolymer method. Membranes were manufactured from the polymer solution and the separation of aqueous ethanol solution was investigated. To enhance the property of urethane resin, carbonate-type polyol(PTMCG) was used. ${\alpha}^{\prime},{\alpha}^{{\prime}{\prime}}$-dimethylolpropionic acid was used as a chain extender to increase the hydrophilicily of the urethane membrane. The ionization of the pendent carboxylic groups in urethane resin was carried out using trimthylamine. To confirm the formation of anionic groups in urethane resin, IR spectra of model compounds were compared with those of urethane resins. It was confirmed that the concentration of hard segment and hydrogen bond contributed to the property of the concentration of hard segment and hydrogen bond contributed to the property of urethane resin in which the mole ratio of chain extender and polyol was from 3:1 to urethane resin in which the mole ratio of chain extender and polyol was from 3:1 to 5:1. The carbonate-type polyurethane containing pendent carboxylic grop(PU) had Tg of around-$25^{\circ}C$ and Tm, $45^{\circ}C$ measured by DSC. Transition temperatures of one containing pendent anionic group(APU) prepared from the ionization of PU shifted to $8{\sim}10^{\circ}C$ lower temperature region than those of PU. Pervaporation membrane was prepared through the casting method. N, N-dimethylformamide (DMF) were used as a solvent and hexamethylene diisocyanate(HMDl) as a crosslinking agent. Swelling degree increased with ethanol concentration in mixure and the control of the swelling degree of the membrane could be achieved by crossliking. The results of pervaporation were as follows : separation factor, 2.3~9.8 ; flux, $27{\sim}79.5g/m^2hr$. Pervaporation separation capacity could be enhanced by reducing the molecular weight of polyol from 2,000 to 1,000.

• Journal of Adhesion and Interface
• /
• v.3 no.2
• /
• pp.9-16
• /
• 2002

In the synthesis of water-based polyurethane using self-emulsification process, after being neutralized, polyurethane pre-polymers containing ionic pendant groups are dispersed by simple convective mixing. Preparation of dispersion is followed by chain extension reaction, which is considered as important step for growth of the molecular weight of polyurethane. In this work, pH variations in the aqueous phase were monitored during the chain extension process in the presence of water-soluble diamines. The optimum degree of chain extension and the average particle size in the polyurethane dispersions were examined with varying ionic pendent group contents, type of chain extenders, and feed rate of chain extenders, The initial pH value in the aqueous phase linearly increased and the optimum chain extension point could be obtained from the intersection of two linear lines having different slopes, All average particle sizes before chain extension reaction were almost same, however, the final average particle size increased as feed rates of chain extenders increased, In addition, as the ionic pendant group contents increased, the particle size decreased since the hydrophilicity and hydrodynamic volume increased. As carbon numbers of the chain extenders increased, the final particle size increased significantly. From the results, it was concluded that the chain extension reaction took place among the particles not only in a particle.

• Journal of the Korean Applied Science and Technology
• /
• v.28 no.1
• /
• pp.10-14
• /
• 2011

Emulsion polymerization was carried out using RMA like MMA, EMA, BMA and Styrene(St.) as monomer for core-shell latex preparation. It was synthesized at $80^{\circ}C$ in the presence of anionic surfactant SLS. FT-IR, TGA and DSC analysis are used to confirm synthesized core-shell emulsion latexes and to investigate the thermal characteristics of them. From analysis of TGA and DSC, the differences of the decomposition rate and the activation energy are not so large. It considers that the pendent group is not affect of the thermal characteristics and stability on core-shell latexes, which is synthesized with RMA and Styrene.

• Macromolecular Research
• /
• v.12 no.5
• /
• pp.493-500
• /
• 2004

We have developed a novel method for patterning functional images in thin polymer films. The key materials we utilized for the imaging were dihydroxyanthraquinones protected with acid-labile tert-butoxycarbonyl (t-Boc) blocking groups. Among the tested compounds, 1,4-dihydroxyanthraquinone (quinizarin; 1) underwent the most drastic change in terms of its color and fluorescence upon protection. We prepared the t-Boc-protected quinizarin and polymers bearing the protected quinizarins as pendent groups. To investigate the possibility of a single-component imaging system, we synthesized a styrenic monomer 14 incorporating protected quinizarin and a maleimide derivative 15 bearing a photoacid generating group and subjected them to polymerization. Selective removal of the protecting groups of the quinizarin moieties in the exposed area using photolithographic techniques allowed regeneration of quinizarin and patterned fluorescence images in the polymer films.

• Journal of the Korean Society of Costume
• /
• v.39
• /
• pp.59-77
• /
• 1998

This paper is focused on the traditional sash weaving handicraft of‘She’ethnic group, which is located in Fujian, Zhejiang, Jiangxi, Guangdong province of China. This research is main-ly based on the field work, analyzed and inter-preted the traditional sash in systematic and reasoned way. The summary of this study are as follows : 1. On its technological aspect, weaving structure of the traditional sash is made of warp rod backed weaving. The used tool is primitive one but the weaving process includes scientific method. 2. From the social-cultural point of view, the sash ha been the symbol of love towards her lover. Every woman of this group had taken training for this sash weaving from a child. 3. On its ethnological aspect, it has been long history and has interchanged with other ethnic group like Miao, Han and also Okinawa country of Japan. The pattern inside this sash are almost looks like characters, but they are not Chinese characters whereas are the inde-pendent code of‘She’ group and have been inherent from ancestors and which will be tran-smitted to their posterity. These independent code of‘She’group are the traditional message to their later generation implicating their natural circumstances, human relationship, ethnic myth, spirit etc. 4. I recognize that the pattern inside the sash is defined as the communicative code and in comparison to language, it is more repetition and less apparent as close code. Nowadays China has been developed es-pecially in the economical fields rapidly. Under the circumstances traditional weaving culture of ethnic groups has been facing a crisis of disappearance, which will be a great loss for the country as well as the human beings. For this reason, I emphasize that it is very immediate to make co-researches into the material culture of Chinese ethnic groups.

• Archives of Pharmacal Research
• /
• v.19 no.5
• /
• pp.390-395
• /
• 1996

To investigate whether $AT_{1}$ receptor antagonists are acting by increasing endothelium-de-pendent and -independent relaxation of aortas in normotensive rats, $AT_{1}$ receptor antagonists, losartan and KR-30988, and angiotensin converting enzyme inhibitor, captopril, were orally administered for two weeks (50 mg/kg, b.i.d.). THe blood pressure, heart rate and body weight were not significantly changed by losartan, KR-30988 and captopril compared to the control group. In aortic preparations, the $pD_{2}$ of KR-30988 for ACh-induced relaxation was 8.33 $\pm$ 0.16, significantly (p <0.05) lower than that of control group $(7.71 \pm 0.15)$. ACh-induced relaxation was significantly increased on losartan-treated group (p<0.01) at $10^{-6}$ M of ACh, and in captopril-treated group (p<0.05) at the range of $10^{-7}$ -$10^{-5}$ M of ACh. The $pD_{2}$ values for histamine-induced relaxatio of losartan, KR-30988 and captopril were 5.57 $\pm$ 0.10, 5.85 $\pm$ 0.21 and 5.60 $\pm$ 0.01, respectively, with significant differences in all groups (p<0.01) compared to that of control group (5.13 $\pm$ 0.09). ACh-induced relaxations of aortic preparations were not changed by pretreatment of indomethacin ($10_{-5}$ M), and completely bolcked by pretreatment of L-NAME $(10_{-5}M)$ in all groups. Sodium nitroprusside-induced relaxations were not significantly changed by all drugs tested in this experiments. These results suggest that $AT_{1}$ receptor antagonists, losartan and KR-30988, enhance the endothelium-dependent relaxatio on aortic preparations through the release of, or increase sensitivity, to nitric oxide in nor-motensive rats.

• Journal of the Korean Society of Safety
• /
• v.19 no.2
• /
• pp.47-53
• /
• 2004

Emulsion polymerization ws carried out using Alkyl methacrylate(RMA) like MMA, EMA, BMA and Styrene Monomer(SM) for core-shell latex preparation. It was synthesized at $80^{\circ}C$ in the presence of anionic surfactant SLS(Sodium Lauryl Sulfate). FT-IR and DSC analysis are used to confirm the synthesized core-shell emulsion latexes. Moreover DSC and TGA were used to investigate the thermal characterisitcs of them. The differences of the decomposition rate and the activation energy from TGA and DSC analysis are not so big. It considers that the pendent group is not affect of the thermal characteristics and stability on core-shell latexes, which is synthesized with RMA and Styrene. For investigating combustion products, LC50 values were calculated by FED(Fractional Effective Dose)from the Pyrolyzer-Mass sepctrometer.

• Korean Journal of Veterinary Research
• /
• v.43 no.1
• /
• pp.57-66
• /
• 2003

Single and 28-day repeated dose toxicity studies of botulimnn toxin type A were carried out in ICR mice and Sprague-Dawley rats, respectively. In the single dose toxicity study, botulinwn toxin was injected intraperitoneally to male and female mice at a single dose of 40, 59, 89 133 and 200 ng/10 ml saline/kg. All animals died from 59 ng/kg group. Some clinical signs, such as decrease in locomotor activity, dyspnea, prone position and ptosis, were observed in most of both sexes from 59 ng/kg group, but no signs were seen in all animals at 40 ng/kg group. The results showed that the median lethal dose of botulinum toxin might be in the range of 40-59 ng/kg in both sexes. In the repeated dose toxicity study, the test material was administered intradermally for 28 days at doses of 0 (vehicle-treated control), 1.25, 2.5, 5.0 and $10.0ng/head/50{\mu}{\ell}$ saline in male and female rats. No test material-related changes were noted in survivals, clinical signs, food and water consumptions and gross finding in any group. Botulinum toxin treatment significantly decreased the body weight gain rate in male of 5.0 ng/head group and over and in female of 10.0 ng/head group compared to vehicle-treated control. One or more relative organ weights (i.e., spleen, thymus, liver and kidney) were increased significantly from 5.0 ng/head group compared to vehicle-treated control in both sexes. Serum biochemistry revealed increases in aspartate aminotransferase (AST), alanine aminotransferase (ALT), creatine phosphokinase, total protein and albumin in male, and increases in AST and ALT and decreases in $K^+$ and $Cl^-$ in female without dose-pendent manners. In the histopathological study, physical stimulation by needle caused slight inflammations of dennis. In addition, botulinum toxin treatment induced denervation of nerve cell and disuse of muscle, resulting in atrophy of skeletal muscle in both sexes from 2.5 ng/head group. When the antibodies to toxin were determined in all animals, a significant increase in serum antibodies was observed from 5.0 ng/head group. The results showed that the NOAEL of botulinum toxin might be 1.25 ng/head for 28-day repeated dose toxicity in rats.

• Journal of the Korean Chemical Society
• /
• v.24 no.1
• /
• pp.80-85
• /
• 1980

The free radical copolymeriaztion of N-vinylurea(VU) with vinyl acetate (VAc) was carried out at $60^{\circ}C$ in three solvents. VU-vinyl alcohol(VA) copolymers were prepared by the methanolysis of the VU-VAc copolymers. From the nitrogen content measurements of VU-VA copolymers, the monomer reactivity ratios for the VU-VAc copolymerization and the values of Alfrey-Price's Q and e for VU were determined. These Q and $\varrho$ values obtained in the cases of using methanol and methanol-dioxane as the polymerization solvents are comparable with those found for other monomers which have > NCO-pendent groups. The $\varrho$ value indicates that the urea group of VU is a electron-donating group. The copolymerization parameter of VU shows a strong effect of the solvents. These results are interpreted to be that VU is in equilibrium with its tautomer at the polymerization temperature.