• Polymer(Korea)
• /
• v.32 no.3
• /
• pp.199-205
• /
• 2008

In this study, we fabricated poly (lactide-co-glycolide) (PLGA) scaffold modified with small intestinal submucosa (SIS) as a drug delivery matrix of bioactive molecules. SIS derived from the submucosa layer of porcine intestine has been widely used as biomaterial because of low immune response. PLGA scaffold was prepared by the method of solvent casting/salt leaching. Novel composite scaffolds of SIS/PLGA were manufactured by simple immersion method of PLGA scaffold in SIS solution under vacuum. SEM observation shows that PLGA and SIS/PLGA scaffolds have interconnective and open pores. Especially, SIS/PLGA scaffold showed that micro-sponge of SIS with interconnected pore structures were formed in the pores of PLGA scaffold. In order to assay release profile of proteins, we manufactured FITC conjugated BSA loaded PLGA and SIS/PLGA scaffold. And the release amount was identified by fluorescence intensity using the fluorescence spectrophotometer. The initial burst of BSA containing SIS/PLGA scaffolds was lower than that of PLGA scaffolds resulting in constant release. And release of BSA in SIS/PLGA scaffold was fast and incremental because of the increased content of BSA. In conclusion, we confirmed that penetrated SIS solution prevented the initial burst of BSA and PLGA modified with SIS scaffold is useful as protein carriers with controlled release pattern.

• Polymer(Korea)
• /
• v.31 no.5
• /
• pp.447-453
• /
• 2007

In this study, we fabricated recrystallized PLGA (rPLGA) particles using the vacuum drying method. In order to investigate an applicability of the rPLGA particles for controlled release system of 5-fluorouracil (5-FU) loaded PLGA wafer, we prepared three different wafers using; 1) untreated PLGA (uPLGA), 2) rPLGA, and 3) uPLGA and rPLGA (4 : 1, 1 : 1 or 1 : 4). The rPLGA particles were characterized using NMR, IR and GPC to compare with uPLGA particles. The surface and cross section morphology of the prepared wafers were observed by the scanning electron microscope. The release profile of the 5-FU loaded wafer was measured by HPLC. The 5-FU/rPLGA wafer released the incorporated 5-FU in a sustained manner with low initial burst compared to 5-FU/uPLGA. These results showed that the ratio of pure PLGA/recrystallized PLGA can affect the release behaviors.

• Polymer(Korea)
• /
• v.26 no.5
• /
• pp.670-679
• /
• 2002

1,3-bis(2-chloroethyl)-1-nitrosourea (BCNU, carmustine) is one of the effective chemotherapeutic agents which has been used clinically for treating malignant glioma. Poly(D,L-lactide-co-glycolide) (PLGA, molecular weight: 20000 g/mole. mole ratio of lactide to glycolide 75 : 15) is a well known biodegradable polymer used as a drug carrier for drug delivery system. In this study, we investigated the BCNU release behaviour of BCNU-loaded PLGA wafers containing poly (N-vinylpyrrolidone) (PVP) or polyethyleneoxide (PEO) and the effect of hydrophilic polymers incoporated in the wafers. BCNU-loaded PLGA microparticles with or without hydrophilic polymers were prepared by a spray drying method and fabricated into wafers by direct compression. Encapsulation efficiency of BCNU-loaded PLGA microparticles containing PVP and PEO was 85 ∼ 97% and crystallinity of BCNU encapsulated in PLGA decreased significantly initial release amount and release rate of BCNU increased with the increasing PVP or PEO amount. Morphological change and mass loss of wafers during the release test were confirmed that hydration and degradation of PLGA would be facilitated with an increase of hydrophilic polymers.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.10
• /
• pp.3225-3232
• /
• 2012

The purposes of this research were to synthesize amoxicillin-carrying magnetic nanoparticles. Magnetic nanoparticles were prepared by a chemical precipitation of ferric and ferrous chloride salts in the presence of a strong basic solution. PLGA and PLGA-PEG copolymers were prepared by ring opening polymerization of lactide (LA) and glycolide (GA) (mole ratio of LA: GA 3:1) with or without polyethylene glycol (PEG). Amoxicillin loaded magnetic PLGA and PLGA-PEG nanoparticles were prepared by an emulsion-evaporation process (o/w). Transmission electron microscopy (TEM) and scanning electron microscopy (SEM) photomicrographs showed that the magnetic nanoparticles have the mean diameter within the range of 65-260 nm also they were almost spherical in shape. Magnetic nanoparticles prepared with PLGA showed more efficient entrapment (90%) as compared with PLGA-PEG (48-52%) nanoparticles. In-vitro release of amoxicillin from magnetic PLGA nanoparticles showed that 78% of drug was released over 24 hours. The amount of amoxicillin released from PLGA-PEG s was higher than PLGA.

• Polymer(Korea)
• /
• v.34 no.1
• /
• pp.63-68
• /
• 2010

In this study, we evaluated the effect of fibrin, a natural material, on the local inflammatory reaction of PLGA in vivo. PLGA degradation products can decrease the pH in the surrounding tissue, causing local inflammatory reaction. To solve this problem, fibrin/PLGA scaffolds were implanted in 5-week-old Wister rats. To evaluate the influence of fibrin content on inflammatory cytokine expression induced by PLGA, RT-PCR analysis was used. Fibrous wall thickness and macrophage infiltration were evaluated by H&E and ED-1 immunohistochemical staining, respectively. In this study, we showed that fibrin/PLGA scaffolds reduced inflammatory reaction as compared to PLGA scaffold. We concluded that fibrin could reduce inflammatory response of PLGA.

• Polymer(Korea)
• /
• v.36 no.1
• /
• pp.1-8
• /
• 2012

In this study, we employed hydroxypropyl-${\beta}$-cyclodextrin (HP-${\beta}$-CD) as an excipient to produce poly(lactic-$co$-glycolic acid) (PLGA) fine particles by a supercritical fluid process, called aerosol solvent extraction system (ASES), and investigated the effect of HP-${\beta}$-CD content on the morphology of the particles. The influence of HP-${\beta}$-CD on the drug release characteristics of paclitaxel-loaded PLGA particles was also evaluated. Fine particles were obtained when the HP-${\beta}$-CD content in PLGA/HP-${\beta}$-CD mixtures was greater than 40% and 30%, respectively, for PLGA(75:25) and PLGA(50:50), whereas a film-like precipitate was obtained for lower HP-${\beta}$-CD content. The release rate for paclitaxel loaded PLGA(75:25)/HP-${\beta}$-CD particles was found to increase with HP-${\beta}$-CD content.

• Journal of Microbiology and Biotechnology
• /
• v.16 no.10
• /
• pp.1577-1582
• /
• 2006

Cartilage tissue engineering has emerged as an alternative approach for reconstruction or repair of injured cartilage tissues. In this study, rabbit chondrocytes were cultured in a three-dimensional environment to fabricate a new cartilaginous tissue with the application of tissue engineering strategies based on biodegradable PLGA microspheres. Chondrocytes were seeded on PLGA microspheres and cultured on a rocking platform for 5 weeks. The PLGA microspheres provided more surface area to adhere chondrocytes compared with PLGA sponge scaffolds. The novel system facilitated uniform distribution of the cells on the whole of the PLGA microspheres, thus forming a new cartilaginous construct at 4 weeks of culture. The histological and immunohistochemical analyses verified that the number of chondrocytes and the amount of extracellular matrix components such as proteoglycans and type II collagen were significantly greater on the PLGA microspheres constructs as compared with those on the PLGA sponge scaffolds. Therefore, PLGA microspheres enhanced the function of chondrocytes compared with PLGA sponge scaffolds, and thus might be useful for formation of cartilage tissue in vitro.

• Korean Chemical Engineering Research
• /
• v.46 no.2
• /
• pp.205-210
• /
• 2008

Poly(D,L-lactide-co-glycolide) (PLGA) has been widely used as carriers in controlled release delivery systems due to its biodegradability and relatively good biocompatibility. However, Release pattern of carriers fabricated using PLGA have disadvantage an initial burst within a few days, lag time several days and then sudden release changes. To solve these problems of PLGA, we fabricated PLGA wafer including monomer. Also, drug release behavior restraint sudden burst effect using recrystallization of PLGA. Recrystallized PLGA was characterized the morphological difference by SEM and in vitro release behavior measured by HPLC. The PLGA molecular weight analyzed to recognize monomer influence during degradation process of polymer using GPC. In this study, drug release duration cut short up to three days and was eliminated the lag time based on the bulk erosion.

• Polymer(Korea)
• /
• v.37 no.2
• /
• pp.141-147
• /
• 2013

Poly(lactide-co-glycolic acid) (PLGA) has been widely used in the drug delivery and tissue engineering applications because of its good mechanical strength and biodegradation profile. However, cell attachment to the scaffold is low compared with that on fibrin although cells can be attached to the polymer surface. In this study, PLGA scaffolds were soaked in cells-fibrin suspension and polymerized with dropping fibrinogen-thrombin solution. Cellular proliferation activity was observed in PLGA/fibrin-seeded costal cartilage cells (CC) on 1, 3, and 7 days using the MTT assay and SEM. The effects of fibrin on the extracellular matrix (ECM) formation were evaluated using CC cell-seeded PLGA/fibrin scaffolds. The PLGA/fibrin scaffolds elicited more production of glycosaminoglycan (GAG) and collagen than the PLGA scaffold. In this study, fibrin incorporated PLGA scaffolds were prepared to evaluate the effects of fibrin on the cell attachment and proliferation in vitro and in vivo. In this result, we confirmed that proliferation of cells in PLGA/fibrin scaffolds were better than in PLGA scaffolds. The PLGA/fibrin scaffolds provide suitable environment for growth and proliferation of costal cartilage cells.

• Polymer(Korea)
• /
• v.32 no.1
• /
• pp.26-30
• /
• 2008

This study was designed to investigate the effect of hybridization of synthetic/natural materials for annulus fibrosus (AF) tissue regeneration in vitro and in vivo. The synthetic/natural hybrid scaffolds were prepared using PLGA (poly (lactic-co-glycolic) acid), SIS (small intestinal submucosa) and DBP (demineralized bone particles). PLGA, PLGA/SIS(20%), PLGA/DBP(20%) and PLGA/SIS (10%)/DBP (10%) scaffold were manufactured by solvent casting/salt leaching method. Compressive strength was measured. Rabbit AF cells were isolated, cultured and seeded into experimental groups. Hydroxyproline production and DNA quantity of AP cells on each scaffold was measured at 2, 4 and 6 weeks after in vitro culture. Cell-scaffold composites were implanted subcutaneously into athymic mice. After 1,4 and 6 weeks postoperatively, specimens were taken and H&E, Safranin-O and type I collagen staining were carried out concerning formation of cartilagenous tissue. In vitro PLGA/SIS scaffold was evaluated for total collagen content (bydroryproline/DNA content) and PLGA scaffold was evaluated for compressive strength.