• Title/Summary/Keyword: PLT

Search Result 232, Processing Time 0.033 seconds

Development of PLT($PbLaTiO_{3}$) pyroelectric materials (PLT($PbLaTiO_{3}$) 초전재료 개발(II))

  • Park, Sung-Kun;Bae, Seung-Choon;Kim, Ki-Wan
    • Journal of Sensor Science and Technology
    • /
    • v.6 no.6
    • /
    • pp.491-499
    • /
    • 1997
  • We fabricated the ceramic PLT tablet which was composed of 5, 10 and 15 mol% lanthanum concentration and thin film PLT to develope pyroelectric materials, and investigated their characteristics. Using TG/DTA, we determined calcination and sintering temperature to sinter the PLT completely and to prevent volatilization of the Pb components. The calcination and sintering temperature were $850^{\circ}C$, $1150^{\circ}C$ respectively, and there was a lot of mass loss at higher sintering temperature. By measuring temperature-dielectric constant characteristics of ceramic tablet we investigated dielectric constant characteristics depends on La concentration. The Curie point of PLT with 5, 10 and 15 mol% lanthanum concentration were $330^{\circ}C$, $269^{\circ}C$ and $210^{\circ}C$ respectively. Using PLT ceramic tablet we observed IR detection characteristics, and then deposited PLT thin film by rf magnetron sputtering. We verified that PLT thin film fabricated with completely sintered PLT target had the same structure to target by investigating lattice constant and optical transparency.

  • PDF

Preparation and Electrical properties of the PLT(28) Thin Film (PLT(28) 박막의 제작과 전기적 특성에 관한 연구)

  • 강성준;정양희
    • Proceedings of the Korean Institute of Information and Commucation Sciences Conference
    • /
    • 2002.11a
    • /
    • pp.784-787
    • /
    • 2002
  • We prepared the PLT(28) thin film by using sol-gel method and investigated the structure and electrical properties of the film. With the XRD and AFM analyses, it is found that PLT(28) thin film annealed at 6sot has a complete perovskite structure and its surface roughness is about 22$\AA$. We prepared PLT(28) thin film on the Pt/TiO$_{x}$SiO$_2$/Si substrate, in which the specimen has a planar capacitor structure, and analyzed the electrical properties of PLT(28) thin film. In result, PLT(28) thin film has a paraelectric phase and its dielectric constant and loss tangent at 10kHz are 761 and 0.024, respectively. Also, the storage charge density and leakage current density of PLT(28) thin film at W are 134fC/$\mu$m2 and 1.01 $\mu$A/cm2, respectively. As a result of this, we concluded that the PLT(28) thin film is a promising material to be used as a capacitor dielectrics for next generation DRAM.M.

  • PDF

Effects of Persimmon leaf on the Photoaging Skin Improvement(2) (감잎의 광노화 피부 개선에 미치는 효과(2))

  • Lee, Chang Hyun;Kim, Nam Seok;Choi, Dong Seong;Oh, Mi Jin;Ma, Sang Yong;Kim, Myoung Soon;Ryu, Seung Jeong;Kwon, Jin;Shin, Hyun Jong;Oh, Chan Ho
    • Journal of Physiology & Pathology in Korean Medicine
    • /
    • v.28 no.1
    • /
    • pp.35-44
    • /
    • 2014
  • This study was performed to investigate the anti-photoaging effects of Persimmon leaf tea(PLT) in hairless mice(SKH-1) exposed to UVB radiation. The animals were divided into non-treated group (normal, N) and UV-radiated groups. UV-radiated groups were divided into only UV-radiated group(control, C) and UV-radiated and PLT treated experimental groups[first extraction treated group(PLT-I), second extraction treated groupe(PLT-II), and third extraction treated group(PLT-III)]. Three PLT treated experimental groups of mice were treated with both oral administration(300mg/Kg B.W./day) and topical application (100 ul of 2% conc./mouse/day) for 4 weeks. Anti-photoaging effects of Persimmon leaf were evaluated by MTT assay, anti oxidative reaction, MMP immunohistochemistry, gelatin zymography assay and RT-PCR observations. Treatment with Persimmon leaf tea(PLT)-I, and -III groups decreased immunohistochemical density of matrix metalloproteinases(MMP)-3 and -9 related to degradation of extracellular matrix in skin. Especially, immunohistochemical density of MMP-2 decreased in PLT-I, -II and -III groups in skin. On the effects of antioxidant function on the treatment with Persimmon leaf tea(PLT), treatment of HaCaT cells with extracts of PLT-I and PLT-II had also significantly reduced intracellular ROS produced by UVB irradiation in a dose dependent manner(PLT-I, p<0.05, p<0.01, p<0.001; PLT-II, p<0.01, p<0.001). Gelatin zymography assay revealed that PLT-II and PLT-III (200 ug/ml) had inhibitory effect on MMP-9 expression in UVB-radiated HaCaT cells. Western blot analysis revealed that PLT-1, -II and -III groups down-regulates the expression of inflammatory associated genes(IL-$1{\beta}$) and PLT-1 and -II groups down-regulates the expression of TNF-${\alpha}$ in a dose dependent manner. Our study suggests that Persimmon leaf tea(PLT) extracts participates in inhibitory effects on the morphological and molecular experiments related to photoaging skin on UVB irradiated hairless mice.

Characteristics of c-axis oriented PLT thin films and their application to IR sensor (c-축 배양된 PLT 박막의 특성 및 IR센서 응용)

  • Choi, B.J.;Park, J.H.;Kim, Y.J.;Kim, K.W.
    • Journal of Sensor Science and Technology
    • /
    • v.5 no.3
    • /
    • pp.87-92
    • /
    • 1996
  • The PLT thin films on (100) cleaved MgO single crystal substrate have been fabricated by rf magnetron sputtering using a PbO-rich target. The dependence of physical and electrical properties on the degree of c-axis orientation has been studied. The degree of c-axis orientation of PLT thin films depends on fabrication conditions. Fabrication conditions of the PLT thin films were such that substrate temperature, working pressure, gas ratio of $Ar/O_{2}$, and rf power density were $640^{\circ}C$, 10 mTorr, 10 seem, and $1.7\;W/cm^{2}$, respectively. In these conditions, the PLT thin film showed the Pb/Ti ratio of 1/2 at the surface, the resistivity of $8{\times}10^{11}{\Omega}{\cdot}cm$, and dielectric constant of 110. The pyroelectric infrared sensors with these PLT thin films showed the peak to peak voltage of 450 m V and signal to noise ratio of 7.2.

  • PDF

A study on the Frequency Dependence of Dynamic Pyroelectric Properties for $Pb_{l-x}La_{x}Ti_{l-x/4}O_3$ (x=0.1) (PLT(10)) Ferroelectric Thin Film ($Pb_{l-x}La_{x}Ti_{l-x/4}O_3$ (x=0.1) (PLT(10)) 강유전체 박막에서 동적 초전특성의 주파수의존성에 관한 연구)

  • 차대은;장동훈;강성준;윤영섭
    • Journal of the Institute of Electronics Engineers of Korea SD
    • /
    • v.39 no.12
    • /
    • pp.1008-1015
    • /
    • 2002
  • The fabricated La-modified lead titanate (PLT) thin film without poling treatment was investigated for modulation frequency dependence of pyroelectric properties by the dynamic method. $Pb_{l-x}La_{x}Ti_{l-x/4}O_3$(x=0.1) (PLT(10)) thin film haying 10 mol% La content was deposited on a Pt/$TiO_{x}$/$SiO_2$/Si substrate by sol-gel method. The PLT(10) thin film exhibits a relatively excellent dielectric property. The pyroelectric coefficient (p) of the PLT(10) thin film is 6.6 x $10^{-9}C$$textrm{cm}^2$$.$K without frequency dependence. The figure of merits for the voltage responsivity and specific detectivity are 1.03 x $10^{-11}C$.cm/J and 1.46 x $10^{-10}C$.cm/J, respectively The PLT(10) thin film has voltage responsivity (RV) of 5.IS V/W at 8 Hz. Noise equivalent power (NEP) and specific detectivity ($D^{*}$) of the PLT(10) thin film are 9.93 x $10^{-8}$W/$Hz^{1/2}$ and 1.81 x $10^{6}$cm.$Hz^{1/2}$/W at the same frequency of 100 Hz,, respectively The results means that PLT thin film having 10 mol% La content is suitable for the sensing materials of pyroelectric IR sensors.

Preparation and Characteristics of PLT(28) Thin Film Using Sol-Gel Method (Sol-Gel 법을 이용한 PLT(28) 박막의 제작과 특성)

  • Kang Seong Jun;Joung Yang Hee;Yoo Jae-hung
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.9 no.7
    • /
    • pp.1491-1496
    • /
    • 2005
  • We fabricated the $Pb_{0.72}La_{0.28}TiO_3$ (PLT(28)) thin film successfully by using the sol-gel method and characterized it to evaluate its potential for being utilized as the capacitor dielectrics of ULSI DRAMs. In our sol-gel process, the acetates were used as the starting materials. Through the TGA-DTA analysis, we established the excellent fabrication conditions of the sol-gel method for the PLT(28) thin film. We obtained the dense and crack-free PLT(28) thin film of $100\%$ perovskite phase by drying at $350^{\circ}C$ after each coating and final annealing at $650^{\circ}C$. Electrical properties of PLT(28) thin film were measured through formation on the $Pt/Ti/SiO_2/Si$ substrate and its dielectric constant and leakage current density were measured as 936 and $1.1{\mu}A/cm^2$, respectively.

Preparation and Characteristics of PLT(28) Thin Film Using Sol-Gel Method (Sol-Gel 법을 이용한 PLT(28) 박막의 제작과 특성)

  • Kang, Seong-Jun;Joung, Yang-Hee;Yoo, Jae-Hung
    • Proceedings of the Korean Institute of Information and Commucation Sciences Conference
    • /
    • v.9 no.2
    • /
    • pp.865-868
    • /
    • 2005
  • We fabricated the $Pb_{0.72}La_{0.28}TiO_3 (PLT(28))$ thin film successfully by using the sol-gel method and characterized it to evaluate its potential for being utilized as the capacitor dielectrics of ULSI DRAMs. In our sol-gel process, the acetates were used as the starting materials. Through the TGA-DTA analysis, we established the excellent fabrication conditions of the sol-gel method for the PLT(28) thin film. We obtained the dense and crack-free PLT(28) thin film of 100% perovskite phase by drying at 350$^{\circ}C$ after each coating and final annealing at 650$^{\circ}C$. Electrical properties of PLT(28) thin film were measured through formation on the Pt/Ti/SiO$_2$/Si substrate and its dielectric constant and leakage current density were measured as 936 and 1.1${\mu}$A/cm$^2$, respectively

  • PDF

A Case Study of High Capacity Bi-Directional High Pressure Pile Load Test (초고용량 양방향 말뚝재하시험(BDH PLT) 수행사례 분석)

  • Kim, Sang-Il;Lee, Min-Hee;Jeong, Sung-Min;Jeong, Eun-Taeg;Choi, Yong-Kyu
    • Proceedings of the Korean Geotechical Society Conference
    • /
    • 2010.03a
    • /
    • pp.1156-1163
    • /
    • 2010
  • The bi-directional high pile load test(BDH PLT) does not have weaknesses found in the existing bi-directional low pile load test(BDL PLT); it has strong economics, is unbound by load capacity limit and secures quality stability of working piles. In this study, Verification the field found a very high capacity level of stability and reliability of the BDH PLT, as well as outstanding field applicability. Field verifications reaffirmed the advantage of the BDH PLT device, which was capable of loading 90 MN capacities as maximum. It was also found to be durable enough to load high capacity with ease.

  • PDF

Characteristics and Application of PLT Thin-Films Deposited on ITO Substrate (ITO 기판위에 증착시킨 PLT 박막의 특성 및 그 응용)

  • Bae, Seung-Choon;Park, Sung-Kun;Choi, Byung-Jin;Kim, Ki-Wan
    • Journal of Sensor Science and Technology
    • /
    • v.6 no.5
    • /
    • pp.423-429
    • /
    • 1997
  • We fabricated PLT thin films on ITO substrate for flat pannel display and investigated the characteristics, then we applicated to electroluminescent device and investigated application possibility. When we fabricated PLT thin films with substrate temperature of $500^{\circ}C$, and pressure of 30 mTorr, the relative deielectric constant and breakdown electricfield of PLT thin films were 120 and 3.2MV/cm. The electric resistivity was $2.0{\times}10^{12}{\Omega}{\cdot}cm$. PLT thin films had polycrystal structure of perovskite and pyrochlore at the higher substrate temperature than $450^{\circ}C$, and had good crystallinity at higher pressure. To use PLT insulator film and ZnS:Mn phosphor, we fabricated thin film electroluminescent device of ITO/PLT/ZnS:Mn/PLT/Al structure. At the result, threshold voltage was $35.2V_{rms}$ and brightness was $2400cd/m^{2}$ at $50V_{rms}$ and 1kHz. Maximum luminescence efficiency was 0.811m/W.

  • PDF

A Study on the Effects of the La Concentration on the Frequency Dependence of Dynamic Pyroelectric Properties of PLT Thin Films (PLT 박막에서 조성에 따른 동적 초전특성의 주파수 의존성에 관한 연구)

  • 차대은;장동훈;강성준;윤영섭
    • Journal of the Institute of Electronics Engineers of Korea SD
    • /
    • v.39 no.10
    • /
    • pp.35-42
    • /
    • 2002
  • Modulation frequency dependences of the pyroelectric properties of PLT (P $b_{1-x}$ L $a_{x}$ $Ti_{1-x}$ 4/ $O_3$) thin films with La concentrations of 5, 10 and 15㏖% have been investigated by using the dynamic method. The PLT thin film with 10㏖% of the La concentration (PLT(10) thin film) shows the most excellent pyroelectric properties among the films. For PLT(10) thin film, the pyroelectric coefficient shows the maximum value of 6.6$\times$10$^{-9}$ C/$\textrm{cm}^2$ㆍK without frequency dependence. The figure of merits for the voltage responsivity and specific detectivity are 1.03$\times$10$^{-11}$ Cㆍcm/J and 1.46$\times$10$^{-9}$ Cㆍcm/J, respectively. Voltage responsivity corresponding to the pyroelectric voltage is almost constant at low modulation frequency and decreases in proportional to frequency at high modulation frequency. Voltage responsivity is 5.15 V/W at 8Hz. Noise equivalent power (NEP) and specific detectivity ( $D^{*}$) of the PLT(10) thin film are 9.93$\times$10$^{-8}$ W/H $z^{1}$2/ and 1.81$\times$10$^{6}$ cmH $z^{1}$2/W at the frequency of 100Hz, respectively. The results indicate that PLT(10) thin film is very suitable for pyroelectric IR sensors.s.s.