• Water for future
• /
• v.19 no.3
• /
• pp.249-258
• /
• 1986

The purpose of this study is to estimate the PMP frequency factor for evaluation of the Probable Maximum Precipitation (PMP) in Korea. The value of PMP is the criterion of the determination of design rainfall in Planning and designing hydraulic structures, and water resources management. To obtain the object, 12 key stations were selected in which have the automatic rain0recording paper of 20 years, and the annual maximum rainfall values were calculated for each 7 durations(10 min., 1, 2, 4, 6, 12, 24 hr.). The statistics(mean, standard deviation)were estimated, and diagram which shows the relationship between mean annual maximum rainfall($$) and frequency factor for each durations were drawn. PMP was estimated by statistical method using the PMP frequency factor obtained from the diagram and statistics($$, Sn). The PMP-Duration Equation was derived from the envelope curve in order to obtain the PMP for an arbitrary duration. The isohyetal map of 24 hours PMP and PMP. DAD curve for the whole of Korea were drawn in accordance with the point PMP values.

• BMB Reports
• /
• v.41 no.6
• /
• pp.448-454
• /
• 2008

Two full-length cDNAs, PutPMP3-1 and PutPMP3-2, encoding PMP3 family proteins were isolated from Puccinellia tenuiflora, a monocotyledonous halophyte. Expression of both genes was induced by low temperature, salt stress, dehydration, ABA, and $NaHCO_3$. Transcripts of PutPMP3-2 were more strongly induced by these stresses relative to those of PutPMP3-1, particularly under low temperature and dehydration conditions. Expression of PutPMP3-1 and PutPMP3-2 in yeast mutants lacking the PMP3 gene can functionally complement the membrane hyper-polarization and salt sensitivity phenotypes resulting from PMP3 deletion. To compare the functions of PutPMP3-1 and PutPMP3-2, the orthologous genes in rice (OsLti6a and OsLti6b) were isolated. Both OsLti6a and OsLti6b could functionally complement the loss of PMP3 in yeast. PutPMP3-2 and OsLti6a were more effective in reversing membrane hyperpolarization than PutPMP3-1 and OsLti6b. However, the four yeast transformants each showed similar levels of salt tolerance. These results imply that these PMP3 family members don't function identically under different stress tolerance conditions.

• Journal of Digital Contents Society
• /
• v.8 no.3
• /
• pp.377-383
• /
• 2007

The existing PMP contents have been usually providing moving picture services. However the rapid increasement by users of mobile equipment brought the need for multipurpose convergence, it is needed to develop the appropriate contents as these products appear. In this paper we designed the easy development environment for game contents that provide limited killer services. Game with the limited PMP input devices as a variety of portable input devices are developed and the equipment function of PMP itself is enhanced, its field of application will be further extended. So, we will design cross platform game development environment for PMP that is able to give friendly and valuable game contents to PMP users.

• Proceedings of the Korea Water Resources Association Conference
• /
• 1986.07a
• /
• pp.93-101
• /
• 1986

This study aims at analysis and application of PMP(Probable Maximum Precipitation) for the determination of design of major hydraulic structures. PMP was estimated by hydro-meteorolgical method and envelope curve method. PMF(Probable Maximum Flood) was then estimated from this PMP by synthetic unit hydrograph method and chow method. From the comparison of three methods for PMP estimation of magnitude of PMP in order of statistical, hydro-meteorlogical, envelope curve method. Amon PMP results estimated by each method it is believed that the hydro-meteorological method gave the best proper value in comparison with historical maximum rainfall because of this method reflected upon all meteorological factor. From the comparison of PMP with probable rainfall and flood, it was shown that estimated value by statistical method and hydro-metelogical method were nearly equivalent to the value of return period 200 to 500 year. It was found that PMF estimated from would be more safe for the design of major hydraulic structures in the consinderation.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.194-194
• /
• 2018

현재까지 우리나라에서는 공식적으로 총 세 번의 전국 가능최대강수량(Probable Maximum Precipitation, PMP) 추정이 이루어졌다. 첫 번째는 1988년에 건설부 주도로 작성된 바 있는데, 1987년까지의 관측된 기상자료를 이용한 수문기상학적인 방법을 전국에 적용하여 한국가능최대강수량도를 작성하였다. 이후 12년 뒤인 2000년에 건설교통부 주도로 그 동안의 축적된 관측자료를 추가하여 한국가능최대강수량을 추정하였다(건설교통부, 2000a). 2000년의 전국 PMP도 추정은 WMO 보고서(WMO, 1986)를 가능한 충실히 반영하려는 노력이 있었으며, 과학적인 측면에서도 한층 진일보된 PMP도가 생산되었다고 평가할 수 있다. 그러나 2000년 이후 태풍 '루사' 또는 태풍 '매미'와 같은 관측 최대 강우량 기록을 경신하는 대형 호우사상들이 연이어서 발생하였기 때문에, 기존에 추정된 전국 PMP도에 대한 의문이 제기됨에 따라 해당 호우들을 추가하여 전국 PMP도를 개략적으로 재산정하여 제시한 바 있다(건설교통부, 2004). 국외에서는 PMP 추정의 표준으로 인정받고 있는 World Meteorological Organization (WMO) 보고서(WMO, 1986)가 2009년에 수정되어 발간됨에 따라 PMP 추정절차 중 일부 방법에 대한 기술적 보완이 이루어졌다(WMO, 2009). 그러나 우리나라의 경우 2008년 PMP 및 PMF 산정절차 지침 수립 용역 이후 중앙정부 차원의 전국 PMP도 생산은 더 이상 추진되고 있지 않은 상태이기 때문에, 2018년 현재에도 2000년 혹은 2004년에 재산정된 전국 PMP도를 그대로 수자원 실무에 이용하고 있다. 이에 본 연구에서는 WMO(2009)에서 제시하는 방법 및 최근 국외에서 적용되고 있는 PMP 추정방식을 참고하여 1973년부터 2017년까지의 기상 자료를 이용하여 전국을 대상으로 PMP를 추정하여 다양한 지속시간별 영향면적별 전국 PMP도를 생산하고 기존 2004년 보고서 결과와 비교를 수행하고자 한다.

• Water for future
• /
• v.19 no.1
• /
• pp.75-86
• /
• 1986

This study aims at the analysis and application of PMP(Probable Maximum Precipitation)for the determination of design flood in the river basin planning and design of major hydraulic structures. PMP was estimated by hydro-meterological method statistical method and envelope curve method. PMF(Probable Maximum Flood)was then estimated from this PMP by synthetic unit hydrograph method and chow method. From the comparison of three methods for PMP estimation of magnitude of PMP in order of statistical, hydro-metrological, envelope curve method. Among PMP results estimated by each method it is believed that the hydro-meteorological method gave the best proper value in comparison with historical maximum rainfall because of this method reflected upon all meterological factor. From the comparison of PMP with probable rainfall and flood, it was shown that estimated value by statistical method and hydro-metrological method were nearly equivalent to the value of return period 100 years and its value of envelope curve method was equivalent to return period 200 to 500 year. It was found that PMF estimated from would be more safe for the design of major hydraulic structures in the consideration.

• Journal of Internet Computing and Services
• /
• v.9 no.5
• /
• pp.9-21
• /
• 2008

In theory, within ubiquitous learning environment, education is happening all around the student but the student may not even be conscious of the learning process. But, in this study, we consider the ubiquitous learning environment where PMP (Personal Multimedia Player) is being used for delivering the learning-contents. And the purpose of this study is to identify the problematic factors recognized by PMP users in u-learning environment. A need analysis was used to identify and evaluate needs of 74 PMP users as well non-users. Based on the interviews of participants, we give a brief summary results on motivation for using PMP, purchasing and operating costs, category of contents being used, dissatisfying and problematic factors with using PMP in u-learning environment. Therefore, we present six categories of factors preventing the u-learning with PMP from being diffused such as lacks of awareness, loss of confidence, side-effects, lacks of education and support, costs, and lacks of contents. In conclusion, we suggest a set of guidelines which might help remove these the resistance factors.

• The Journal of Korean Association of Computer Education
• /
• v.10 no.1
• /
• pp.77-88
• /
• 2007

More flexible learning models are needed, and learning environments that operate through mobile technologies such as portable multimedia players(PMP) provide useful tools in implementing these learning models. The main attractant of PMP is often their versatility: being able to load and play different formats of video, audio, digital images, and interactive media. In this paper, we investigate the factors influencing the usage and acceptance of the PMP for study, based on the extended version of the Technology Acceptance Model (TAM). Based on data collected from online survey, we show that perceived usefulness, perceived ease of use, flow and perceived enjoyment are the major determinants for users to play PMP for study purpose. Factors, including ease of use, contents-credibility are shown to determine the level of perceived usefulness; additionally, perceived usefulness, ease of use and perceived enjoyment are shown to directly affect the level of flow. Based upon the statistical results, some useful guidelines for developing learning contents are also provided.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.539-539
• /
• 2015

본 논문에서는 과거 호우를 이용하여 우리나라의 가능최대강수량(Probable Maximum Precipitation, PMP)을 산정하고, 기존의 결과와 비교하고자 한다. 1973년부터 2014년까지 190개의 호우를 선정한 후 WMO(2009)에서 사용된 수문기상학적 방법을 이용하여 면적별($25km^2$, $100km^2$, $225km^2$, $400km^2$, $900km^2$, $2025km^2$, $4900km^2$, $10000km^2$, $19600km^2$), 지속시간별(1, 2, 4, 6, 8, 12, 18, 24, 48, 72시간)로 우리나라의 PMP를 산정하고 계산된 결과를 바탕으로 한강유역, 낙동강유역, 금강유역, 영산강 유역의 PMP를 추정하였다. 또한 2000년에 산정된 PMP와 비교하여 그 값이 얼마만큼 변화되었는지 비교하였다. 또한 약 15년간의 극한강우 사상의 변화와 이에 따른 PMP 값의 변화에 대한 경향성을 평가해 보았다.

• The Journal of the Korea Contents Association
• /
• v.7 no.9
• /
• pp.117-126
• /
• 2007

The purpose of this paper is to analyze the trends of technological development in the field of portable multimedia player (PMP) through patent information of major countries, and evaluate the technological Position of PMP. In the first place, we will carry out a quantitative analysis in terms of the annual trend of patent applications in the field of PMP, the technological position of PMP through portfolio analysis, the share of patents by applicant, the worldwide innovation leader of major countries, and the patent trend by IPC. Secondly, we will measure the technological level of PMP using indicators including cites per patent (CPP), science linkage (SL), and patent family size (PFS). Finally, we will evaluate the directions of research or technology development and the technological competitiveness of major countries. This evaluation could give us some useful policy implications on the strategy of R&D in PMP.