• Journal of the Korean Applied Science and Technology
• /
• v.19 no.2
• /
• pp.117-122
• /
• 2002

A silicone softner (SS-5), a permanent press (PP) finish, was prepared by blending silicone oil KF-96 (as a lubricating component) and beef tallow hardened oil (as a softening component) which was synthesized from fatty polyamide salts. The prepared SS-5 and the PP finishing resin were applied to PP finishing cotton cloth and P/C gingham sample by one-bath method. The properties such as crease recovery, tear strength, and bending resistance were tested. The samples treated with SS-5 and PP finishing resin showed improved properties when comparing with the untreated ones, with the ones treated only with PP finishing resin, with ones treated with commercial PP finishing softners and PP finishing resin. The grades of fabric samples treated with 3% SS-5 were fifth grade in the bending resistance test.

• Journal of the Korean Applied Science and Technology
• /
• v.15 no.1
• /
• pp.1-7
• /
• 1998

Lubricating softner(SOS-2) for permanent press(PP) finish was prepared by blending water, beef tallow hardened oil for improving softness, and the emulsion which was synthesized from N-hexadecanoyl-N,N'-bis(2-hexadecamidoethyl)amine as a softening component and silicone oil KF-96 as a lubricating component. The prepared SOS-2 and the PP finishing resin were applied to PP finishing cotton broad cloth and P/C gingham samples using one bath method. The properties such as tear strength, crease recovery, bending resistance test were tested. The samples treated with SOS-2 and PP finishing resin have improved properties, compared with nontreated samples, those treated only with PP finishing resin, those treated with commercial PP finishing softners and PP finishing resin.

• Journal of the Korean Applied Science and Technology
• /
• v.12 no.1
• /
• pp.29-34
• /
• 1995

Silicone softner(SSN-3) for permanent press(PP) finish was prepared by blending beef tallow hardened oil for Improving softness, water, the emulsion, which was synthesized from pentaerythritol monostearate as a softening component and silicone oil KF-96 as a lubricating component. The prepared SSN-3 and the PP finishing resin were applied to PP finishing cotton broad cloth and P/C gingham samples using one bath method. The properties such as crease recovery, tear strength, bending resistance test were tested. The samples treated with SSN-3 and PP finishing resin have improved properties, compared with nontreated samples, those treated only with PP finishing resin, those treated with commercial PP finishing softners and PP finishing resin. Also from the bending resistance test, the two kinds of fabric samples treated with SSN-3 of 3% showed grade 5 and these were good enough in feeling.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2011.03a
• /
• pp.91-91
• /
• 2011

폴리프로필렌(PP)은 고결정성 범용수지로서 염색성, 내열성, 촉감 등의 문제로 의류용 소재로는 부적합하여 초기에는 카펫용 섬유로서 가염형 폴리프로필렌 섬유가 상업화 되었지만 성공하지는 못하였다. 그 후, 섬유 산업도 의류용 외의 산업자재, 생활 자재 분야 등이 성장함에 따라, 폴리프로필렌 섬유의 수요가 확대되었다. 최근들어 스포츠 액티브 의류가 일반의류 트렌드로 들어오면서 기능성 섬유가 요구되고 이 분위기에 맞춰 다시 한번 폴리프로필렌 섬유의 의류화가 요구되는 시점이 되었으며 섬유중 에너지 소비량이 가장 적고, 쉽게 재용해할 수 있으며 소각시 유해 가스발생량이 매우 적은 특징등이 있기 때문에 지구 환경보호의 입장에서 폴리프로필렌 섬유가 재검토되고 있다. 이번 실험은 분산염료를 이용하여 농도별, 온도별, 시간별, 후처리시 시간과 온도의 변화로 가염 PP/PET 섬유의 염색특성을 알아보기 위해 실험 진행하였다. 실험에 사용되는 시약은 1급으로, $CH_3COOH$, NaOH, $Na_2S_2O_4$이며, 조제는 분산제, 정련제를 사용하였다. 먼저 온도별 실험에서 $40^{\circ}C$에서 승온하여 각각 $100^{\circ}C$, $110^{\circ}C$, $120^{\circ}C$, $130^{\circ}C$에서 온도에 따라 염색되는 정도를 알아보았다. 가장 높은 흡진을 보이는 온도에서 각각 40min, 50min, 60min, 70min 염색 유지시간 실험을 하여 염색이 안정되는 시간을 측정하였다. 위의 실험 결과 최적의 조건으로 염색농도에 따른 Build up 실험을 진행하였다. 가염 PP/PET 섬유는 일반 Polyester처럼 $120{\sim}130^{\circ}C$에서 가장 높은 염색농도 값(K/S)을 보인다. 또한 $130^{\circ}C$에서의 유지시간에서는 50 min 이상 진행시 더 이상의 흡진이 없거나, 염료의 탈락이 있음을 알수 있다. Build up 실험에서는 8.0%까지 실험하였지만, 결과는 그 이상농도를 사용하여도 염색은 가능함을 알 수 있었다. 후처리에 대한 실험에서 염료에 따라 차이가 있지만 크게 영향을 받지 않는 것으로 보이며, 제품성 평가 결과를 보면 후처리를 했을 경우 견뢰도가 우수한 것을 알 수 있었다.

• Textile Coloration and Finishing
• /
• v.34 no.3
• /
• pp.165-172
• /
• 2022

Polypropylene(PP) is a textile material with various functions such as eco-friendliness, lightness, and elasticity. Although most synthetic fibers can be dyed and finished, but original PP is difficult to dye or finish due to its extremely hydrophobic properties, so its application expansion is limited. In order to solve this problem, dyeable PP was developed, and various researches on textiles for clothing such as mass production technology, fine fiberization and performance improvement are in progress. Plasma treatment is a processing method for modifying the surface of fabrics, and has effects such as hydrophilization, deepening color, improving adhesion, and surface polymerization. In this study, plasma treatment was applied to study changes in hydrophilization properties of dyeable PP, surface changes before and after plasma treatment and performance according to hydrophilization.

• Journal of the Korean Applied Science and Technology
• /
• v.21 no.3
• /
• pp.191-196
• /
• 2004

An emulsion of octadecamidoethylaminoethyl dodecate (which provides softness) and an emulsion silicone oil KF-96 (which provides lubricity) were separately synthesized. Then PP finishing softeners (SSA-7) was prepared by blending of the synthesized emulsions with beef tallow hardened oil (a softness improving agent). PP finishing treatment was carried out with the prepared SSA-7 and PP finishing resin by a one bath method, and several physical properties were tested. As a result, crease recovery, tear strength, softness, lubricity, and bending resistance were all good, indicating that the prepared SSA-7 is a good PP finishing softener.

• Polymer(Korea)
• /
• v.25 no.5
• /
• pp.642-648
• /
• 2001

An attempt was made to synthesize an ammonia adsorbent by the photo-induced grafting of styrene (St) onto polypropylene (PP) nonwoven using benzoin ethyl ether (BEE) as a photosensitizer with urea and trimethylol propane triacrylate in methanol medium. As styrene concentration was increased, the graft yield was increased. It was also found that the graft yield increased with reaction time. The polypropylene grafted with styrene (PP-g-St) was sulfonated by chlorosulfonic acid in dichloroethane and complexed with several metal ion, such as $cO^{+2}$, $nI^{+2}$, $cU^{+2}$, $Zn^{+2}$. The amount of ammonia gas adsorbed by these sample was dependent on the degree of sulfonation, adsorption time, and ammonia gas pressure. The adsorption capacity of ammonia gas by the sulfonated PP-g-St(SPP-g-St) nonwoven with 4. 25 mmol $H^+$/g was 6.61 mmol/g. Metal ion complexed SPP-g-St nonwovens had higher adsorption capacity than SPP-g-St nonwoven and the $Co^{+2}$ complexed SPP-g-St showed 9.90 mmol $NH_3$/g, which was much higher than that of active carbon or silica gel.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.865-868
• /
• 2008

As a part of a series of study, this study reviewed the fire proof characteristics of high performance concrete RC column members using non-stripping form that accompanied metal lath lateral confinement to prevent spalling of high performance concrete which is increasingly used recently, and the results are as follows. Flow and air amount both satisfied target range, and compressive strength, over 80MPa at age 28 days, showed high strength range. As for spalling characteristics, in the case of plain in which no fiber is mixed, severe spalling occurred, and in the case of 0.05% nylon("NY" hereinafter)+polypropylene("PP" hereinafter) fiber mixture, only surface area experienced partial spalling. Regarding non-stripping form changes, both non-stripping 25-20 and non-stripping 50-20 experienced spalling at finish material area, and non-stripping 50-20 showed better spalling proof performance than non-stripping 25-20. In the case of non-stripping 50-40, spalling was prevented, and while mass reduction rate was less than 10%, its temperature hysteresis showed the most excellent fire proof performance with base metal surface area maximum temperature $376.1^{\circ}C$.

• Korean Journal of Applied Biomechanics
• /
• v.15 no.1
• /
• pp.75-89
• /
• 2005

D. K. LEE, J. S. LEE, B. J. LEE, H. S. LEE, Y. J. KIM, S. B. PARK, J. P. JOO. Plantar foot pressure analysis during golf swing motion using plantar foot pressure measurement system. Korean Journal of Sport Biomechanics, Vol. 15, No. 1, pp. 75-89, 2005. In this study, weight carrying pattern analysis and comparison method of four foot region were suggested. We used three types of club(driver, iron7, pitching wedge). This analysis method can compare between top class golfer and beginner. And the comparison data can be used to correct the swing pose of trainee. If motion analysis system, which can measure the swing speed and instantaneous acceleration at the point of hitting a ball, is combined with this plantar foot force analysis method, new design development of golf shoes to increase comfort and ball flight distance will be available. 1. Address acting, forces concentrated in rare foot regions and lateral foot of right foot. Back swing top acting, relatively high force occurred in medial forefoot region of left foot and forefoot region of right foot. Impact acting, high force value observed in the lateral rarefoot region of left foot and medial forefoot region of right foot. Finish acting, force concentration observed on the lateral region and rarefoot region of left foot. 2. Forces were increased in address of right foot with clubs length increased. All clubs, back swing top acting, high force value observed in the lateral forefoot region of right foot. All clubs, in impact, high force value observed in the lateral rarefoot region of left foot and medial forefoot region of right foot. Finish acting, force concentration observed on the rarefoot region in driver and lateral foot region in iron on left foot. 3. Right foot forces distribution were increased in address, back swing top and left foot force distribution were increased in impact, finnish