• Applied Chemistry for Engineering
• /
• v.9 no.5
• /
• pp.654-660
• /
• 1998

In preparing PSZT powder by hydrothermal synthesis, effects of reaction temperature, concentration of raw materials and mineralizer on crystallinity, particle size distribution, and dielectric constant were investigated. By varying the concentration of mineralizer and the ratio of Pb to Sr or Zr to Ti, crystalline PSZT powder, having the mean particle size of $0.3{\sim}15{\mu}m$, was prepared by hydrothermal synthesis in the temperature range of $120{\sim}200^{\circ}C$ for a 2h reaction. PSZT ceramics, having dielectric constant of 1000~3000, were prepared at $1150^{\circ}C$ for a 2h sintering reaction of the PSZT powders. Experimental results showed that the weight mean particle size of $0.5{\mu}m$ was obtained when the concentration of KOH in the solution was 10 wt % and the ratio of Pb to Sr was 0.95/0.05, that of Zr to Ti was 0.52/0.48. It also showed that the ceramics of dielectric constant of 2900 were prepared through sintering of this PSZT powder. Size of PSZT particles became smaller with its narrow distribution as the concentration of KOH increased up to 10 wt %. However, it came to be larger at this concentration and above. By adding small amount of Sr that would not affect that crystallinity of particles we can improve dielectric property of sintered materials. Addition of Zr may shift the major crystal phase of synthetic PSZT powder from tetragonal to rhombohedral phase.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.7 no.2
• /
• pp.292-300
• /
• 1997

PSZT powders having the particle size of 0.5~5 $\mu\textrm{m}$ with cubic shapes, were prepared by a hydrothermal reaction in the temperature range of 150~$^{\190circ}C$ for a 2 h reaction. Experimental results showed that as the reaction temperature increased, the nucleation and crystal growth were accelerated and the the particle size became larger. However, the particle size became smaller with its narrow distribution as the concentration of a mineralizer (KOH) increased. It was possible to reduce the reaction temperature by increasing mineralizer concentrations. With increase in Zr/Ti ratio, the major crystal phase of synthetic PSZT powders was seen to change from tetragonal phase to rhombohedral phase.

• Journal of the Korean Ceramic Society
• /
• v.45 no.11
• /
• pp.681-687
• /
• 2008

The sintering and electrical properties of the hydrothermal PSZT powders obtained by substituting 4, 6 and 8mol% Sr for Pb in PZT lattice structure were investigated. The lattice constant and particle size decreased in proportion to a quantity of Sr. The sintering properties of PSZT powders showed $7.754g/cm^3$ of sintered density and $4{\mu}m$ of grain size at sintering temperature of $1250^{\circ}C$. Curie temperature lowered gradually from $363.6^{\circ}C\;to\;319.2^{\circ}C$ and relative dielectric constants increased rapidly by a quantity of Sr. In comparison to PZT, moreover, the quality factor of PSZT was increased more than three times with increase of Sr mole ratio, and piezoelectric constant $(d_{31}\;and\;g_{31})$ was decreased. It was found that dielectric loss of PSZT was decreased by 0.574% which was half of PZT.

• Journal of the Korean Ceramic Society
• /
• v.45 no.11
• /
• pp.713-718
• /
• 2008

PSZT are selected and SHS are applied to each system. The sintering properties of PSZT powders showed $7.754g/cm^3$ of sintered density and $4{\mu}m$ of grain size at sintering temperature of $1250^{\circ}C$. Curie temperature lowered gradually from $363.6^{\circ}C\;to\;319.2^{\circ}C$ and relative dielectric constants increased rapidly by a quantity of Sr. This remarkable contrast in dielectric properties with powder preparation methods, in this study, was not due to grain size and sintered density but rather a crystallinity and sinterability of synthesized powders, extra-supplied Pb during reaction, mol fraction of rhombohedral phase and purity of starting materials.

• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 1997.10a
• /
• pp.21-25
• /
• 1997

우수한 세라믹스 제조를 위해서는 작은 입자지름, 좁은 입도분포, 구형의 입자형태, dopant와 matrix가 균일한 고용체를 갖고, 응집입자가 없으며 고순도인 원료 분말의 제조가 선행되어야 한다. 이를 위하여 본 연구에서는 수열 합성법을 이용하여$\alpha$-Al$_2$O$_3$, $\alpha$-SiO$_2$, PZT, PSZT, BTO등의 미세분말을 제조하는 공정에서 반응온도, 광화제의 양과 종류, 반응시간, 출발물질의 양과 종류, 전처리공정, 교반공정 등이 평균입자지름과 결정성 및 입도분포에 미치는 영향을 조사하였다. 그결과 미세분말의 종류에 관계없이 반응온도, 반응시간, 성장기질의 농도, 종자결정의 농도 등이 증가할수록 평균입경은 커지며, 광화제의 농도가 증가할수록 평균 입자지름이 작아지고, 광화제의 농도가 종자결정의 농도가 증가할수록 입도분포가 좁아짐을 알 수 있었다. 특히 $\alpha$-SiO$_2$에 대해 수열합성실험으로부터 평균입자지름과 수열합성의 조업변수간의 특성방정식을 얻었다.