• 한국환경과학회지
• /
• 제16권5호
• /
• pp.623-632
• /
• 2007

The objective of this study is analysis of Andong-Dam lake water quality with water quality model. Model parameters of the WASP applied to Lake Andong-Dam were estimated. The methodology is based on grouping water quality constituents and relevant parameters and successively estimating parameters by a trial-and-error procedure. Water qualify system for modeling consisted of BOD, DO, T-N, T-P. The results of water quality modelling using WASP. T-N was maximum affected by K71C(Organic nitrogen mineralization rate) parameter. T-P was maximum affected by K83C(Dissolved organic phosphorus mineralization) parameter, and It did not show a difference almost from the parameter of others and it omitted. BOD was maximum affected by Temperature parameter, it was visible of the reaction due to the KDC(Deoxygenation rate) in afterwords, and it did not show a difference from the parameter of others and it omitted. DO was maximum affect by Temperature parameter, and It did not show a difference almost from the parameter of others and it omitted. The parameter which it presumes from the this study uses a water quality modeling and Actual value and the result with which it compares, error rate the parameter presumption which is appropriate with 1% interior and exterior is investigated, It will reach and it uses and it will be able to apply to the suitable parameter in water quality modelling of the objective area which can be feeded by it becomes.

• Smart Structures and Systems
• /
• 제9권4호
• /
• pp.373-392
• /
• 2012

Tracking control of systems with variable stiffness hysteresis using a gain-scheduled (GS) controller is developed in this paper. Variable stiffness hysteretic system is represented as quasi linear parameter dependent system with known bounds on parameters. Assuming that the parameters can be measured or estimated in real-time, a GS controller that ensures the performance and the stability of the closed-loop system over the entire range of parameter variation is designed. The proposed method is implemented on a spring-mass system which consists of a semi-active independently variable stiffness (SAIVS) device that exhibits hysteresis and precisely controllable stiffness change in real-time. The SAIVS system with variable stiffness hysteresis is represented as quasi linear parameter varying (LPV) system with two parameters: linear time-varying stiffness (parameter with slow variation rate) and stiffness of the friction-hysteresis (parameter with high variation rate). The proposed LPV-GS controller can accommodate both slow and fast varying parameter, which was not possible with the controllers proposed in the prior studies. Effectiveness of the proposed controller is demonstrated by comparing the results with a fixed robust $\mathcal{H}_{\infty}$ controller that assumes the parameter variation as an uncertainty. Superior performance of the LPV-GS over the robust $\mathcal{H}_{\infty}$ controller is demonstrated for varying stiffness hysteresis of SAIVS device and for different ranges of tracking displacements. The LPV-GS controller is capable of adapting to any parameter changes whereas the $\mathcal{H}_{\infty}$ controller is effective only when the system parameters are in the vicinity of the nominal plant parameters for which the controller is designed. The robust $\mathcal{H}_{\infty}$ controller becomes unstable under large parameter variations but the LPV-GS will ensure stability and guarantee the desired closed-loop performance.

• 한국경영과학회지
• /
• 제31권1호
• /
• pp.15-24
• /
• 2006

In simulation input modeling, it is important to identify a probability distribution to represent the input process of interest. In this paper, an appropriate sample size is determined for parameter estimation associated with some typical probability distributions frequently encountered in simulation input modeling. For this purpose, a statistical measure is proposed to evaluate the effect of sample size on the precision as well as the accuracy related to the parameter estimation, square rooted mean square error to parameter ratio. Based on this evaluation measure, this sample size effect can be not only analyzed dimensionlessly against parameter's unit but also scaled regardless of parameter's magnitude. In the Monte Carlo simulation experiments, three continuous and one discrete probability distributions are investigated such as ; 1) exponential ; 2) gamma ; 3) normal ; and 4) poisson. The parameter's magnitudes tested are designed in order to represent distinct skewness respectively. Results show that ; 1) the evaluation measure drastically improves until the sample size approaches around 200 ; 2) up to the sample size about 400, the improvement continues but becomes ineffective ; and 3) plots of the evaluation measure have a similar plateau pattern beyond the sample size of 400. A case study with real datasets presents for verifying the experimental results.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2016년도 춘계학술대회
• /
• pp.101-103
• /
• 2016

최근 들어, 영상 추적(Visual Tracking)에서의 목표물을 sparse coefficient vector로 나타낼 수 있게 되면서, L1 minimization 방법을 이용한 영상처리 속도 향상이 필요하게 되었다. 더 나아가서, L1 minimization 방법은 영상 추적 과정에서 주로 발생하는 occlusion 문제를 해결하는 방법으로 많이 사용되고 있다. 다라서 본 논문에서는 영상 추적 과정에서 발생하는 occlusion 문제의 해결을 위해서 L1 minimization의 parameter를 분석하였다. L1 minimization에는 최소화 결과에 영향을 미치는 weighted parameter가 존재하며, 이들은 고정 상수나 목표물의 중간값, 평균값, 표준편차로 나타내어 진다. 실험 결과를 바탕으로 분석하였을 때, weighted parameter 중에서 평균값이 OPE(One Pass Evaluation)을 기반으로 한 success rate와 precision performance에서 좋은 결과를 갖는 것을 확인할 수 있었다.

• 대한기계학회논문집A
• /
• 제21권1호
• /
• pp.164-172
• /
• 1997

Two parameter technique that uses far-field stress and displacement distributions was applied to composite laminates in order to calculate mode II energy release rate, $G_{II}$ . The $G_{II}$ calculated by two parameter technique was compared with that calculated from the crack closure method to inspect the effectiveness of two parameter technique. Sensitivity study of two parameter technique to the crack extension size was also performed. The results showed that both methods produced comparable $G_{II}$ results. In particular, it was found that although the crack closure method was affected by the crack extension size, the two parameter technique was less affected by the crack extension size.

• Communications for Statistical Applications and Methods
• /
• 제14권1호
• /
• pp.255-266
• /
• 2007

A Bayesian estimation of the four-parameter gamma distribution is considered under the noninformative prior. The Bayesian estimators are obtained by the Gibbs sampling. The generation of the shape/power parameter and the power parameter in the Gibbs sampler is implemented using the adaptive rejection sampling algorithm of Gilks and Wild (1992). Also, the location parameter is generated using the adaptive rejection Metropolis sampling algorithm of Gilks, Best and Tan (1995). Finally, the simulation result is presented.

• 한국해양공학회지
• /
• 제13권4호통권35호
• /
• pp.174-181
• /
• 1999

A form parameter method compounds the form parameters which define the hull geometric characteristics. This method can transform a hull form by changing the form parameters. The form parameter method is a hull define method without utilization of mother ships. However it is difficult to determine these form parameters. Thus, we are complemented the form parameter method using the neural networks. It is found that the form parameter method using the neural networks is efficient in hull form design by consideration of application examples.

• 한국군사과학기술학회지
• /
• 제14권1호
• /
• pp.92-99
• /
• 2011

In this study, new multi-axial, critical plane based, fretting fatigue crack initiation parameter is developed by the addition of a new term into the Modified Shear Stress Range(MSSR) parameter. The newly developed parameter (MSSR') is then used to evaluate fretting fatigue life of titanium alloy, Ti-6A1-4V with various contact conditions. Finite element analysis is also used in order to obtain stress distribution on the contact surface during fretting fatigue test, which is then used for the calculation of fretting fatigue parameter. The MSSR' parameter shows better performance in predicting fretting fatigue lives from the conventional fatigue data, and less scattering within fretting fatigue data with different contact geometries.

• 산업경영시스템학회지
• /
• 제32권3호
• /
• pp.99-109
• /
• 2009

Negative binomial yield model for semiconductor manufacturing consists of two parameters which are the average number of defects per die and the clustering parameter. Estimating the clustering parameter is quite complex because the parameter has not clear closed form. In this paper, a Bayesian approach using Markov Chain Monte Carlo is proposed to estimate the clustering parameter. To find an appropriate estimation method for the clustering parameter, two typical estimators, the method of moments estimator and the maximum likelihood estimator, and the proposed Bayesian estimator are compared with respect to the mean absolute deviation between the real yield and the estimated yield. Experimental results show that both the proposed Bayesian estimator and the maximum likelihood estimator have excellent performance and the choice of method depends on the purpose of use.

• 영어어문교육
• /
• 제5호
• /
• pp.219-247
• /
• 1999

The purpose of this paper is to examine how Korean learners of English reset the "prodrop" parameter of Korean into "non-prodrop" parameter of English in the process of English acquisition. An experiment was conducted to 45 Korean learners of English on the prodrop phenomenon, namely on the null referential or null nonreferential subject, and subject-verb agreement by way of grammatical judgment. The results of the experiment are as follows: First, L2 learners follow the parameter of L1, and then reset the parameter of L2 regardless of the parameter of L1 as their L2 abilities advance. Thus, this study provides further support for the hypothesis that universal grammar is available via L1. Second, the referential subject is, at first, easier to acquire than nonreferential subject, and the triggering fact for the switch from [+prodrop] to [-prodrop] was the use of nonreferential subjects. Third, 3rd person agreement has no connection with the acquisition of the prodrop parameter as a result of subject-verb agreement. Therefore, these results indicate that verb agreement is not a trigger for the recognition of the obligatory subject.