• Journal of Korean Tunnelling and Underground Space Association
• /
• v.16 no.6
• /
• pp.543-552
• /
• 2014

This research covers correlation analysis between the machine data measured from EPB Shield TBM construction site and the ground condition during excavation, and figures out how the machine data are affected by the change of ground conditions through single and mixed parameter analysis. It was found that when the ground is changed from hard rock to soft rock, the ratio of the cutter torque to thrust force increases. The relationship between the ratio of the cutter torque to thrust force and the penetration rate shows that the ratio has a certain range of values for hard rock; on the other hand, it increases for soft rock. It means that we can recognize a sign of appearance of weak zone by assessing the ratio of the cutter touque to thrust force according to each penetration rate. Multiple regression analysis of the machine data showed that the cutter torque increases with the increases of the total thrust force, and it decreases with the increase of the uniaxial compressive strength of the ground.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.14 no.1
• /
• pp.23-35
• /
• 2012

Due to the convenience, RMR has been widely applied in civil engineering works such as tunnel, slope, and so on. Many researchers have studied to suggest more simple and trustable RMR by modifying its parameters. However, those researches have just focused on looking for easy modified-RMRs by reducing number of parameters using various statistical analyses. Therefore, this research studied questions of modified-RMRs and gaps between RMR and its parameters. Approximately 2,000 parameters of 400 RMRs from various tunnel sites were normalized respectively and compared with one another to study their relations and divergences. The comparison results showed that there were common patterns among RMR and parameters. Data of uniaxial compressive strength and RQD, qualitative parameters, were located in upper side of RMR line. Discontinuity condition and ground water, quantitative oriented parameters, were opposite to them. It means if both qualitative and quantitative parameters can be properly combined then it can be easy to make simple and easy modified-RMRs without using difficult statistics. This results also show that the majority of field engineers used to estimate RMR conservatively when they did quantitative oriented parameters.

• Asian-Australasian Journal of Animal Sciences
• /
• v.17 no.8
• /
• pp.1158-1161
• /
• 2004

This study chiefly aims to ascertain the effect of birth weight and litter size on productive performance in rabbits. After delivery kits were removed from their mothers for individual weighing and randomly assigned to one of the following three experimental treatments: Group (KT 6) with six tiny kits (about 45 g) per litter (21 litters); Group (KT 8) with eight tiny kits (about 45 g) per litter (17 litters); Group (KN8) with eight normal kits (about 70 g) per litter (20 litters). The litters, separated from their mothers by putting them in a closed cage, suckled one time a day for 15 minutes. Daily milk production was measured by weighing the does immediately before and after suckling; body weight of kits was measured on a weekly basis. At weaning 60 rabbits per group were raised for six weeks to ascertain post-weaning performance and health. Compared with the two other groups, the kits of group KT8 ingested smaller quantities of milk both during the first 3 weeks (497.7 vs. 520.0 vs. 544.3 g, respectively for groups KT8, KN8, KT6) and the following period (261.3 vs. 285.0 vs. 302.7 g, respectively for KT8, KN8, KT6). The differences between groups KT8 and KT6 were statistically significant (p<0.01) in the first period while in the second period also KN8 group showed milk intake different in respect of KT8 (p<0.01) and KT6 (p<0.05) groups. Solid feed intake was significantly (p<0.05) lower in group KT6 (23.1 vs. 26.2 vs. 26.8 g/d, respectively for groups KT6, KN8, KT8). At weaning the kits of group KN8 always weighed more (966 vs. 894 vs. 888 g; p<0.01, respectively for groups KN8, KT6, KT8). After weaning, no parameter considered (daily weight gain, feed intake, feed conversion ratio, mortality and risk sanitary index) was affected by birth weight and litter size.

• Asian-Australasian Journal of Animal Sciences
• /
• v.22 no.8
• /
• pp.1140-1150
• /
• 2009

Forage diets provide good quality carcasses in sheep but very little is known in tropical goats. An experiment was designed with Creole male goats using grass-based systems to assess carcass yield, scores, cuts and composition. After weaning (84 d, 9.2 kg LW) two modes of forage feeding were compared with two replicates of each. Feeding groups were: PF for animals reared at pasture (n = 62) and IF when reared indoors (n = 60). Given that forage finishing will result in low ADG it appeared necessary to study different fattening lengths. The kids were equally divided into 4 groups: group A (n = 32), 4mo after weaning; group B (n = 32), 4mo after A; group C (n = 30), 3mo after B and group D (n = 28), 2mo after C. The animals grazed (in two sub-flocks) on irrigated tropical pastures managed in a rotational system (28 d of re-growth) at a mean stocking rate of 1,200 kg/ha/yr LW. The IF groups were reared in collective pens on a slatted floor (2 replicates of 7 or 8 kids each). They were fed the same stand of tropical grass (25% DM, 12% CP) as that of pasture that was cut daily and provided ad libitum. The ADG (-10%), the weights of omental fat (-60%) and fat in shoulder (-18%), the ultimate pH of carcass (-12%), the meat colour score (-24%), the ""parameter accounting for redness (12%) and the DM and lipid contents (-4%) were significantly lower (p<0.05) in PF than in IF, while the liver was heavier (+23%, p<0.05). Feeding conditions seemed to be similar, thus, differences could be related to gastrointestinal parasitism in the PF system and hypotheses are discussed. Increasing the fattening duration, resulted in significant difference (p<0.01) in many traits: the weights at slaughter and of carcass increased by 40% and 60% from groups A to D and consequently the weights of body compartments and carcass cuts (1.5 to 2.0 fold more). When the results were presented as percentage of empty body weight and carcass weight, these preliminary results (carcass weight 9kg and yield 53%, muscle proportion 70%) and qualitative parameters (low fat score 2/5, fat proportion 5%), seem to be a good incentive for the sector to develop a niche market to meet consumer lean meat expectations. The indoors system could be implemented where there was low availability of grazing areas or problems of dog attacks.

• Asian-Australasian Journal of Animal Sciences
• /
• v.24 no.10
• /
• pp.1425-1434
• /
• 2011

This experiment was designed to evaluate the effects of the processing method of common vetch seed (CVS) (Vicia sativa) on laying performance, egg quality, metabolic parameters and liver histopatology during the peak production period in hens. Lohman layers, 46 wk of age in 6 replicate cages each containing 4 hens, were allocated randomly to one of four dietary treatments. Diets were control (C) diet containing no common vetch and experimental diets containing 25% raw common vetch (RCV), 25% soaked in water for 72 h with exchange of water every 24 h (SCV) and 25% soaked&boiled at $100^{\circ}C$ for 30 minute common vetch (SBCV). Inclusion of RCV into the diet deteriorated all laying performance variables. SCV did not alleviate the adverse effect of raw common vetch on feed intake, egg weight, feed conversion, final weight and weight change. SCV partially alleviated egg production (p<0.001). SBCV diminished the adverse effect on feed intake, egg weight, feed conversion, final weight and weight change compared to raw vicia sativa (p<0.001). No significant difference was detected between SBCV and the control group in terms of egg production, feed conversion, final weight and weight change. Regardless of the processing method, all the common vetch groups had lower shell strength compared to the control group. Haugh units did differ between all groups (p<0.001). Inclusion of RCV and SCV into the basal diet decreased triglyceride, cholesterol, total protein and serum glucose concentrations (p<0.001). Hovewer, inclusion of SBCV into the basal diet increased these parameters. Liver samples were stained with Hematoxylin and eosin (HE) and evaluated by light microscopy. A biopsy of native liver tissue was used as a control. No histopathologic finding was present in the control group. Raw V. sativa compared with the control caused lipid accumulations in hepatocytes, severe congestion of hepatic blood vessels, inflammation, increased numbers of Kupffer cells and sinusoidal dilatations. Whereas, the livers from groups given treated V. sativa showed only different degrees of sinusoidal dilatations. Findings from the present study point out the risk of increased hepatic damage due to use of raw Vicia sativa. Increasing treatment of V. sativa lead to a decrease of liver damages. Inclusion of raw and soaked vetch seeds in rations affected adversely all parameters examined in laying hens. But alleviation was observed when soaked and boiled vetch seeds (SBCV) were fed. The results of these experiments indicated that soaked&boiled Vicia sativa seeds may safely be used at a 25% level in rations of laying hens.

• Asian Pacific Journal of Cancer Prevention
• /
• v.17 no.2
• /
• pp.799-805
• /
• 2016

Background: There is no standard treatment for patients with platinum-resistant or refractory epithelial ovarian cancer. Single agent chemotherapies have evidence of more efficacy and less toxicity than combination therapy. Most are very expensive, with appreciable toxicity and minimal survival. Since it is difficult to make comparison between outcomes, economic analysis of single-agent chemotherapy regimens and best supportive care may help to make decisions about an appropriate management for the affected patients. Objective: To evaluate the cost effectiveness of second-line chemotherapy compared with best supportive care for patients with platinum-resistant or refractory epithelial ovarian cancer. Materials and Methods: A Markov model was used to estimate the effectiveness and total costs associated with treatments. The hypothetical patient population comprised women aged 55 with platinum-resistant or refractory epithelial ovarian cancer. Four types of alternative treatment options were evaluated: 1) gemcitabine followed by BSC; 2) pegylated liposomal doxorubicin (PLD) followed by BSC; 3) gemcitabine followed by topotecan; and 4) PLD followed by topotecan. Baseline comparator of alternative treatments was BSC. Time horizon of the analysis was 2 years. Health care provider perspective and 3% discount rate were used to determine the costs of medical treatment in this study. Quality-adjusted life-years (QALY) were used to measure the treatment effectiveness. Treatment effectiveness data were derived from the literature. Costs were calculated from unit cost treatment of epithelial ovarian cancer patients at various stages of disease in King Chulalongkorn Memorial Hospital (KCMH) in the year 2011. Parameter uncertainty was tested in probabilistic sensitivity analysis by using Monte Carlo simulation. One-way sensitivity analysis was used to explore each variable's impact on the uncertainty of the results. Results: Approximated life expectancy of best supportive care was 0.182 years and its total cost was 26,862 Baht. All four alternative treatments increased life expectancy. Life expectancy of gemcitabine followed by BSC, PLD followed by BSC, gemcitabine followed by topotecan and PLD followed by topotecan was 0.510, 0.513, 0.566, and 0.570 years, respectively. The total cost of gemcitabine followed by BSC, PLD followed by BSC, gemcitabine followed by topotecan and PLD followed by topotecan was 113,000, 124,302, 139,788 and 151,135 Baht, respectively. PLD followed by topotecan had the highest expected quality-adjusted life-years but was the most expensive of all the above strategies. The incremental cost-effectiveness ratios (ICER) of gemcitabine followed by BSC, PLD followed by BSC, gemcitabine followed by topotecan and PLD followed by topotecan was 344,643, 385,322, 385,856, and 420,299 Baht, respectively. Conclusions: All of the second-line chemotherapy strategies showed certain benefits due to an increased life-year gained compared with best supportive care. Moreover, gemcitabine as second-line chemotherapy followed by best supportive care in progressive disease case was likely to be more effective strategy with less cost from health care provider perspective. Gemcitabine was the most cost-effective treatment among all four alternative treatments. ICER is only an economic factor. Treatment decisions should be based on the patient benefit.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.22
• /
• pp.9731-9737
• /
• 2014

Large scale secular registry or surveillance systems have been accumulating vast data that allow mathematical modeling of cancer incidence and mortality rates. Most contemporary models in this regard use time series and APC (age-period-cohort) methods and focus primarily on predicting or analyzing cancer epidemiology with little attention being paid to implications for designing cancer registry, surveillance or evaluation initiatives. This research models age-specific cancer incidence rates using logistic growth equations and explores their performance under different scenarios of data completeness in the hope of deriving clues for reshaping relevant data collection. The study used China Cancer Registry Report 2012 as the data source. It employed 3-parameter logistic growth equations and modeled the age-specific incidence rates of all and the top 10 cancers presented in the registry report. The study performed 3 types of modeling, namely full age-span by fitting, multiple 5-year-segment fitting and single-segment fitting. Measurement of model performance adopted adjusted goodness of fit that combines sum of squred residuals and relative errors. Both model simulation and performance evalation utilized self-developed algorithms programed using C# languade and MS Visual Studio 2008. For models built upon full age-span data, predicted age-specific cancer incidence rates fitted very well with observed values for most (except cervical and breast) cancers with estimated goodness of fit (Rs) being over 0.96. When a given cancer is concerned, the R valuae of the logistic growth model derived using observed data from urban residents was greater than or at least equal to that of the same model built on data from rural people. For models based on multiple-5-year-segment data, the Rs remained fairly high (over 0.89) until 3-fourths of the data segments were excluded. For models using a fixed length single-segment of observed data, the older the age covered by the corresponding data segment, the higher the resulting Rs. Logistic growth models describe age-specific incidence rates perfectly for most cancers and may be used to inform data collection for purposes of monitoring and analyzing cancer epidemic. Helped by appropriate logistic growth equations, the work vomume of contemporary data collection, e.g., cancer registry and surveilance systems, may be reduced substantially.

• The Journal of the Acoustical Society of Korea
• /
• v.24 no.2
• /
• pp.103-110
• /
• 2005

Providing adequate amount of spatial impression for spaciousness) has been known to be one of the most important design considerations for the good acoustics of rooms for music. and the measurement, of room acoustics using parameters. such as LEF and IACC, forms an essential part of such evaluation. However. it is unavoidable to use different transducers (figure of eight microphones. head and torso) for the measurement of each parameter and it tends to make the measurement procedure complicated. The Present work tried to provide a simpler way to measure these binaural room acoustic parameters including monaural ones with a single measurement system using both spatial information collected through a 5-channel microphone and a trained neural network. A computer simulation program, CATT-Acoustic V7.2. which allowed us to obtain exactly the same spatial information as a 5-channel microphone was used. since it requires quite a large amount of data for practical training of a neural network. Since each reflection has different energy. delay and direction, energy should be integrated properly. the concept of ray tracing method was applied inversely in this work. Also applying weightings according to the delay times was considered in this work. Finally, predicted results were compared with the measured data md their correlations were analyzed and discussed.

• Korean Journal of Psychosomatic Medicine
• /
• v.9 no.2
• /
• pp.182-193
• /
• 2001

The purpose of this study is to evaluate correlation of adolescent eating attitude and psychological factors which might influence the eating attitude such as depression, aggression and impulsiveness. The author also tried to identify relationship between adolescent eating attitude and biological factors such as serum cholesterol level and triglyceride level. Two hundred and forty one female high school students without physical disorder were selected as study subjects. For the study, Eating Attitude Test-26KA (EAT -26KA), Beck Depression Inventory (BDI) -Korean version, Barrat Impulsiveness scale (BIS) -Korean version, and Buss-DurKee Hostility Inventory (BDHI) -Korean version were used. Serum cholesterol level and triglyceride level were also investigated. For the purpose of identifying factors which could influence eating attitude of adolescence, stepwise multiple linear regression analysis was done. Total score of BDHI could be most significant factor to explain eating attitude, and BDI, serum cholesterol/triglyceride level be second, third position respectively. But, BIS was not significant predicting parameter. The contributing portion of these factors to explain eating behavior was 25.9%.

• Microbiology and Biotechnology Letters
• /
• v.31 no.1
• /
• pp.83-89
• /
• 2003

2,4-Dichlorophenoxyacetic acid (2,4-D) as a widely used herbicide has caused serious environmental problems because of its difficult decomposition in nature. We isolated the strain capable of metabolizing 2,4-D as sole carbon and energy source by an enrichment culture technique from the 2,4-D contaminated soil collected at orchard in Gwangju, Korea. This strain was identified tentatively as Aeromonas sp. NOH2. With this strain, we established the response surface methodology (Box-Behnken Design) to optimize the principle parameters for maximizing biodegradation of 2,4-D such as culture pH, temperature, and nutrient concentration in liquid batch culture. The ranges of parameters were obtained from preliminary works done at our laboratory and chosen as 5.5, 6.5, and 7.5 for pH, 25, 30, and $35^{\circ}C$ for temperature, and 5, 20, and 35 g/1 nutrient concentration. Initial concentration of 2,4-D was 500 ppm and nutrient source was tryptic soy broth. The experimental data were significantly fitted to a second order polynomial equation using multiple regression. The most important parameter influencing 2,4-D degradation and biomass production was nutrient concentration. For 2,4-D degradation, the optimum values of pH and temperature, and nutrient concentration were obtained at pH (6.5), temperature (31.8 to $32.1^{\circ}C$), and nutrient concentration (29.6 to 30.1.0 g/1).