• Proceedings of the Korean Institute of Building Construction Conference
• /
• v.y2004m10
• /
• pp.27-30
• /
• 2004

The objectives of the present study is to solve problems in PC tile before-fixing method using ordinary concrete by adopting the liquefaction method in manufacturing PC to which the tile before-fixing method is applied, and to provide basic information for the practical use of the PC tile before-fixing method, which uses high workable concrete, through manufacturing a complex body based on the optimal mix proportion,

• Journal of Environmental Health Sciences
• /
• v.27 no.1
• /
• pp.8-13
• /
• 2001

The tiles were manufactured using a mixture of the TK material(a raw material in making tile) and Cu-Cr-Ag impregnated activated carbon(ASC Charcoal). The extraction character of heavy metals in making tile was evaluated and the manufacturing conditions of tile were studied. The heavy metals in the mixture-before and after the tile was production of tiles was successful and as a result of heavy metal analysis, the tile showed that the concentration of heavy metal after the production of tiles was lower than that of the before one. The concentration of eluted heavy metal by acidic and basic solutions was low and the quality of the produced tile was similar to the commercial one. The result of this study suggested that the waste ASC charcoal was used to produce good tiles and it also might reduce soil pollution.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2021.05a
• /
• pp.183-184
• /
• 2021

Defects such as falling and cracking of tiles installed in the bathrooms of apartment houses are frequently occurring. Therefore, in order to solve this problem, the A/S cost of construction companies and consumer complaints are increasing. The causes of tile defects include problems such as the selection of tile adhesive and lack of adhesive strength, the carelessness of the installer, the base surface, and the absorption rate of the tile. Therefore, in this study, an adhesive construction method using tile adhesives with high resistance to deformation of floors and tiles was studied. In addition, the properties and construction methods of tile adhesives were evaluated.

• Journal of Environmental Science International
• /
• v.5 no.6
• /
• pp.771-778
• /
• 1996

The sediment in the highly contaminated Gamjeon brook was collected, mixed with the raw material of the tile, and then the commercial tile was produced using the mixture. The concentrations of the heavy metals in the mixture-before and after the tile was produced-were analyzed and the effects of the acid solution on the produced tile were examined. The production of the tiles was successful and the result of heavy metal analysis showed that the concentration of Fe was the highest and that of Cd was the lowest The amount of heavy metal in the sediment - the raw material of the tile mixture was more than that of the produced tile. The elution concentration of the heavy metal by the acid solution(pH : 4 - 7) was low and the quality of the produced tile was better than the commercial tile. The result of this study suggested that the contaminated sediment was removed to produce good tiles, therefore the water pollution and soil pollution were reduced.

• Journal of Korean Society for Atmospheric Environment
• /
• v.25 no.1
• /
• pp.38-45
• /
• 2009

Since the seventies and the oil crisis, energy-saving measures have led to a reduction in the ventilation of room. The use of synthetic materials which emit various chemical substances had led to an increase in the concentration of indoor pollutants. "Sick building syndrome (SBS)" and "Sick house syndrome (SHS)" are worldwide problems. Also, the number of complaints about indoor air pollution caused by VOCs (Volatile organic compound) and HCHO (Formaldehyde) has increased. It is important that evaluating and understanding emission of indoor air pollutant from building materials. The object of this study was to evaluate emission test method for flooring such as wood based flooring, carpet tile, rubber tile, PVC sheet and tile, and to determine emission of TVOC and form-aldehyde. The quantity of TVOC and carbonyl compounds emission were sampled and measured by Tenax TA and gas chromatography/mass spectrometry (GC/MSD), 2,4-DNPH cartrige with ozone scrubber and high performance liquid from flooring. The TVOC concentration emitted from carpet tile was ($7.419\;mg/m^2 h$) the highest among 5 groups of test materials. In wood based flooring and PVC tile, the emitted concentration of toluene was high. And the dodecane emission was highest in carpet. The concentration of TVOC decreased by an increase in emission test period. After 7 days, the concentration of TVOC from floorings were about 50% below of the concentration at the first day. TVOC emission from wood based flooring, carpet tile, rubber tile, PVC sheet and tile were decreased in 28 days and remained steady after about 15 days. The concentration of formaldehyde emission from floorings showed extremely low.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2014.05a
• /
• pp.106-107
• /
• 2014

This study dealt with an experimental study on development of tile grout cement complied with international standards criteria. Tile Grout Cement is divided two grade, 1 type and 2 type, in KS F 1592:2011. International Standards(ISO) is divided 9 grade. performance evaluation for cement content was measured according to KS L ISO 13007. water absorption test results are based on the cement content 30% were satisfied with International Standards criteria. strength test results are based on the cement content 25% were satisfied with International Standards criteria.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1995.10a
• /
• pp.293-299
• /
• 1995

A methodology is applied to identify tile learning trend related to the safety and availability of U.S. commercial nuclear power plants. The application is intended to aid in reducing likelihood of human errors. To assure that tile methodology ran be easily adapted to various types of classification schemes of operation data, a data bank classified by the Transient Analysis Classification and Evaluation(TRACE) scheme is selected for the methodology. The significance criteria for human-initiated events affecting tile systems and for events caused by human deficiencies were used. Clustering analysis was used to identify the learning trend in multi-dimensional histograms. A computer rode is developed based on tile K-Means algorithm and applied to find the learning period in which error rates are monotonously decreasing with plant age.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.11a
• /
• pp.127-132
• /
• 1996

Total organic carbon (TOC) derived from organics is one of tile possible contamination in the reactor water system and causes of pH change and high conductivity levels. Measurements of total dissolved oxidizable carbon were carried out and its contribution to conductivities at elevated temperature was studied by using tile thermodynamic equilibrium analysis in carbonic acid system. The calculated conductivities were in good agreement with tile levels observed for tile formation of carbonic acid from salicylic acid solution.

• 한국HCI학회:학술대회논문집
• /
• 2009.02a
• /
• pp.487-492
• /
• 2009

There will be many large displays in common public places, and we expect that these displays will give users many convenient interactive services. However, due to the physical size, typical mouse and keyboard are not suitable for user interactions on large displays. Recently there are many studies investigating on new interaction techniques and input devices developed for user interactions in a large display. In this paper, we describe the iTILE framework designed to help develop the interactive tiled display applications. Then we describe two iTILE applications using the tape switch interface and the tangible interface with infrared camera and markers.

• Journal of KIISE:Databases
• /
• v.41 no.4
• /
• pp.226-241
• /
• 2014

LOD(Linked Open Data) is composed of RDF triples which are based on ontologies. They are identified, linked, and accessed under the principles of linked data. Publications of LOD data sets lead to the extension of LOD cloud and ultimately progress to the web of data. However, if ontologically the same things in different LOD data sets are identified by different URIs, it is difficult to figure out their sameness and to provide trustworthy links among them. To solve this problem, we suggest a Trustworthiness Improving Link Evaluation, TILE for short, technique. TILE evaluates links in 4 steps. Step 1 is to consider the inference property of syntactic elements in LOD data set and then generate RDF triples which have existed implicitly. In Step 2, TILE appoints predicates, compares their objects in triples, and then evaluates links between the subjects in the triples. In Step 3, TILE evaluates the predicates' syntactic property at the standpoints of subject description and vocabulary definition and compensates the evaluation results of Step 2. The syntactic elements considered by TILE contain RDFS, OWL, OWL2 which are recommended by W3C. Finally, TILE makes the publisher of LOD data set review the evaluation results and then decide whether to re-evaluate or finalize the links. This leads the publishers' responsibility to be reflected in the trustworthiness of links among the data published.