• Journal of the Microelectronics and Packaging Society
• /
• v.21 no.1
• /
• pp.25-29
• /
• 2014

In this study, an optical PCB was proposed which can overcome the limitations of the conventional PCB, and a new structure with pluggable lens was considered for a high-efficient passive alignment. The structure was a lens-added optical waveguide for the improvement of misalignment between the lens and the waveguide in the alignment. Also, as it had a barrier-type structure to prevent the surface damage of the lens by desorption, the high-efficient passive alignment can be realized. The structure was designed by optimizing the simulation and the fabrication process of the pluggable lens structure was conducted using the repetitive photolithography and the thermal reflow. The optical waveguide with the lens-integrated pluggable interconnection was fabricated by the imprint process using the polydimethylsiloxane(PDMS) replica mold. Therefore, we confirmed the possibility of pluggable lens-added optical waveguide structure fabrication for high-efficient passive alignment.

• Korean Journal of Optics and Photonics
• /
• v.16 no.1
• /
• pp.79-84
• /
• 2005

To increase the tolerance for passive fiber alignment, a single mode polymer waveguide with a large core structure is demonstrated. The large core waveguide is designed to have a mode profile comparable to that of a thermally expanded core (TEC) fiber, and it can be connected to a high-contrast waveguide through an adiabatic transition taper structure. From a waveguide with a rectangular core of 25 ${\times}$ 25 ${\mu}{\textrm}{m}$$^2$, a single mode propagation is observed when the index contrast is as low as 0.0005. A UV-cured injection molding method is used to fabricate the thick core structure. Due to the large mode size, the insertion loss of the device is below 0.5 dB until the lateral displacement of the TEC fiber is 4.5 ${\mu}{\textrm}{m}$. The low insertion loss is important for reproducible passive alignment.

• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.2 s.179
• /
• pp.57-64
• /
• 2006

Optical filters in WDM are passive communication components used in case of transmitting and reflecting lights with specific wavelengths. In this paper, a novel mechanism for the automatic and optical alignment has been presented. It includes minimum axes not to be coupled each other. The automatic spectrum inspection system has been developed to improve the alignment time of reference optical ray, spectrum inspection time and inspection quality, simultaneously. It has been confirmed that the proposed spectrum inspection system is faster, more precise and more reliable than those based on the conventional handwork.

• ETRI Journal
• /
• v.27 no.4
• /
• pp.446-448
• /
• 2005

Using tightly focused femtosecond laser pulses, we produce an optical waveguide and devices in transparent materials. This technique has the potential to generate not only channel waveguides, but also three-dimensional optical devices. In this paper, an optical splitter and U-grooves, which are used for fiber alignment, are simultaneously fabricated in a fused silica glass using near-IR femtosecond laser pulses. The fiber- aligned optical splitter has a low insertion loss, less than 4 dB, including an intrinsic splitting loss of 3 dB and excess loss due to the passive alignment of a single-mode fiber. Finally, we present an output field pattern, demonstrating that the splitting ratio of the optical splitter becomes approximately 1:1.

• Journal of the Microelectronics and Packaging Society
• /
• v.19 no.4
• /
• pp.13-18
• /
• 2012

By the need for high-speed data transmission in PCB, the studies on the optical PCB has been conducted with optical interconnection and its packaging technology. Particularly, the polymer-based optical interconnection has been extensively studied with the advantages such as cost-effective and ease of process. For high-efficiency and passive alignment, the studies were performed using the 45 degree mirrors, MT connector, and etc. In this work, integrated PLC device and fiber alignment array block was fabricated by using imprint technology to solve the alignment and array problem of optical device and the optical fiber. The fabricated integrated block for optical interconnection of PLC device has achieved higher precision of decreasing the dimensional error of the patterns by optimization of process and its insertion loss has an average value of 4.03dB, lower than criteria specified by international standard. In addition, a optical waveguide with built-in lens has been proposed for high-efficiency and passive alignment. By simulation, it was confirmed that the proposed structure has higher coupling efficiency than conventional no-lens structure and has the broad tolerance for the spatial offset of optical waveguide.

• Journal of the Korean Society of Physical Medicine
• /
• v.15 no.3
• /
• pp.51-59
• /
• 2020

PURPOSE: The purpose of this study was to provide clinical basic data to reduce pain and improve function by comparing neck muscle activity and neck alignment using self-stretching and passive stretching exercises for chronic neck pain caused by forward head posture. METHODS: The subjects were divided into 15 subjects assigned to perform self-stretching exercise and 15 subjects assigned to perform passive stretching exercise. The intervention was conducted for a total of 4 weeks. The muscle activity in the neck was measured by surface electromyography (EMG) before intervention, and craniovertebral and cranial rotation angles were measured by X-ray. The 4-week intervention was conducted and the above items re-measured in the same manner and analyzed. RESULTS: Muscle activity within both groups after intervention using self-stretching or passive stretching exercise was significantly different (p < .05)(p < .01). Neck alignment of both groups was significantly different (p < .001)(p < .01). Further, muscle activities of the upper trapezius and splenius capitis muscles showed significant differences (p<.05). Lastly, neck alignment showed statistically significant difference (p < .05). CONCLUSION: Self-stretching exercise activated motor nerves as a posture correction exercise, thereby improving inhibition of muscle activity, muscle contraction delay, and pathological conditions of the muscle. For future research, interventions of self-stretching exercise will be needed for patients with chronic back pain accompanied by forward head posture, and various clinical studies on postural improvement of forward head posture by maintaining a normal muscle tone state are needed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.11A
• /
• pp.1053-1058
• /
• 2006

In this paper, We proposed a efficient OSA(Optical Sub-Assembly) packaging method in use 1.31/1.49um bi-directional hybrid-integrated PLC chip for low-cost OSA in optical access network system applications as GE-PON in FTTH. Fabricated OSA with passive optical fiber alignment and nonhermetic plastic package method and measured optical coupling efficiency and electric-optical characteristics. Its performance is feasible to satisfy the GE-PON ONU specifications with the results as less than 0.5dB coupling losses within 40um alignment of z-axis and less than -24dBm sensitivity. It also has good temperature characteristics to sustain optical output power more than 1.5mW and 10dB extinction ratio, less than 0.3dB tracking error.

• Journal of the Microelectronics and Packaging Society
• /
• v.14 no.3
• /
• pp.7-13
• /
• 2007

In the optical module for optical communications, the flip chip bonding is used fer the precise alignment of the optical fiber and optical device. In flip chip bonding, the optical device is aligned and welded while observing the alignment mark of substrate and chip by using flip chip bonder in order to bond the optical device at the exact position. In this research, optical passive alignment method of photodiode(PD) flip chip bonding is suggested for low cost optical subassembly. By using the visible He-Ne laser (633nm wavelength), photodiode is easily aligned with emitting spot on the optical fiber with the help of stereoscopic alignment system. We compensated wavelength dependent deviation about 4m to find out real alignment position of 1550nm input laser by ray tracing. The maximum optical coupling efficiency between the optical fiber and photodiode was about 23.3%.

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.02a
• /
• pp.298-299
• /
• 2003

As the demand for high frequency(bandwidth) optical module of reduced cost is increased, there are considerable needs for low cost／ high reliable optical packaging method. In order to meet these requirements, the researches using silicon optical bench(SiOB) technology have been developed as one of the leading technology. In this paper, we discuss optical package using one aspherical lens mounted on SiOB by passive alignment, and present the reliability data for the optical module, which are temperature cycling between 40C and +85C, and high temperature storage 85C(unbiased), 2000hour.

• Journal of the Korean Society of Physical Medicine
• /
• v.10 no.2
• /
• pp.17-27
• /
• 2015

PURPOSE: The purpose of this study was to compare the effects of three interventions (intervention by passive range of motion exercise plus manual cervical traction, Mulligan's joint mobilization, and strengthening exercises) after Kaltenborn's joint mobilization on the cervical spine alignment, and muscle activity in patients with a forward head posture. METHODS: The subjects were 39 students from H University in Chungnam and C University in Jeonbuk. The subjects in each group attended training sessions three times a week for four weeks. We used one-way ANOVA and Scheffe's post hoc test to compare values between groups, and used paired t-test to compare the values of the dependent variables within groups. RESULTS: The results showed that the active intervention group experienced a significant increase compared to the passive intervention group in terms of the craniovertebral angle, cervical lordosis angle, and had significant decreases compared to the passive intervention group in terms of the upper trapezius muscle activity. The active intervention group also had significant increases in craniovertebral angle and decreased anterior scalene muscle activity than the active-assistive intervention group. The active-assistive intervention group had significant decreases compared to the active intervention group in terms of the serratus anterior, levator scapulae, and splenius capitis muscle activity. CONCLUSION: It appears that the subjects with a forward head posture had significant improvements in the cervical lordosis angle, cranial rotation angle, craniovertebral angle, and muscle activity after intervention by Mulligan's joint mobilization (active-assistive intervention component) and strengthening exercises (active intervention component) after applying Kaltenborn's joint mobilization.