• Journal of dental hygiene science
• /
• v.2 no.2
• /
• pp.75-83
• /
• 2002

By extracting the variables related to the work stress generated from dental hygiene, identifying their relationships, this study aims to contribute to academic progress on work stress. The test results of this study are as follows for each hypothesis: 1. Among the work stress sensing factors, role ambiguity showed correlation to the active coping strategy and the passive coping strategy, whereas it did not have any correlation to the evasive reation. However, the physical resource environmental factor showed correlation to the active coping strategy, whereas it did not have any correlation to the other reation. 2. The passive coping strategy, among the work stress coping strategies, influences the role ambiguity, B type, work ambiguity, physical resource environmental factor by about 18.7%. 3. The active coping strategy, among the work stress coping strategies, influences the social support, role ambiguity, work place of health center factor by about 18.9%. 4. The evasive reaction, among the work stress coping strategies, was influenced by only the 36 years old over factor by approximately 4.2%. 5. It was found in all work stress sensing factors that the group with lower social support had a more degree of experiencing stress than the group with higher social support. In case of the behavior pattern, the type A experienced more stress than the type B only in role ambiguity. 6. It was found that the group with the higher social support tended to choose more active coping strategy than the lower social support. In case of behavior pattern, the type B coped more actively than type A in the passive coping strategy.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.26 no.2
• /
• pp.165-171
• /
• 2016

A prosthetic knee for above-knee (AK) amputee is categorized into passive and active type. The passive prosthetic knee is generally made by elastic material. Although AK amputee can easily walk by using passive prosthetic leg, knee joint motions are not similar to ordinary persons. The active prosthetic leg can control the knee angle owing to the actuator and microprocessor. However, the active type is not cost-effective and the stability may be lost due to the malfunction of sensors. In order to resolve these disadvantages of passive and active type, a semi-active prosthetic knee which can control the knee angle is proposed in this work. The proposed semi-active one requires a less input energy but provides active type performance. In order to achieve this goal, in this work, a semi-active prosthetic knee using magneto-rheological (MR) damper for AK amputees is designed. The MR damper can support the weight of body by using less energy than actuator of active prosthetic. It can control knee angle by inducing the magnetic field at the time of stance phase. This salient characteristic is evaluated and presented in this work.

• English Language & Literature Teaching
• /
• v.12 no.2
• /
• pp.19-40
• /
• 2006

This paper deals with a part-specific analysis of grammatical errors in the production of the English passive in writing. The purpose of the study is dual: to explore common error types in forming the passive; and to provide plausible sources of the errors, with special attention to the role of the native language. To this end, this study obtained a large amount of data from Korean EFL university students using an essay writing task. The results show that in forming the passive sentence, errors were made in various ways and that the most common problem was the formation of the be-auxiliary, in particular, the proper use of tense and S-V agreement. Another important finding was that the global errors found in this study were not necessarily those with the greatest frequency. Also corroborated was the general claim that many factors work together to account for errors. In many cases, interlingual and intralingual factors were shown to interact with each other to explain the passive errors made by Korean students. On the basis of the results, suggestions are made for effective and well-formed use of the passive sentence.

• Corrosion Science and Technology
• /
• v.9 no.1
• /
• pp.20-28
• /
• 2010

According to the bipolar model, ion selectivity of some species in the passive film is important factor to control the passivation. An increase of cation selectivity of outer layer of the passive film can stabilize the film and improves the corrosion resistance. Therefore, the formation and roles of ionic species in the passive film should be elucidated. In this work, two types of solution (hydrochloric or sulfuric acid) were used to test high N and Mo-bearing stainless steels. The objective of this work was to investigate the formation of oxyanions in the passive film and the roles of oxyanions in passivation of stainless steel. Nitrogen exists as atomic nitrogen, nitric oxide, nitro-oxyanions (${NO_x}^-$), and N-H species, not nitride in the passive film. Because of its high mobility, the enriched atomic nitrogen can act as a reservoir. The formation of N-H species buffers the film pH and facilitates the formation of oxyanions in the film. ${NO_x}^-$ species improve the cation selectivity of the film, increasing the oxide content and film density. ${NO_x}^-$ acts similar to a strong inhibitor both in the passive film and at active sites. This facilitates the formation of chromium oxide. Also, ${NO_x}^-$ can make more molybdate and nitric oxide by reacting with Mo. The role of Mo addition on the passivation characteristics of stainless steel may differ with the test environment. Mo exists as metallic molybdenum, molybdenum oxide, and molybdate and the latter facilitates the oxide formation. When nitrogen and molybdenum coexist in stainless steel, corrosion resistance in chloride solutions is drastically increased. This synergistic effect of N and Mo in a chloride solution is mainly due to the formation of nitro-oxyanions and molybdate ion. Oxyanions can be formed by a 'solid state reaction' in the passive film, resulting in the formation of more molybdate and nitric oxide. These oxyanions improve the cation selectivity of the outer layer and form more oxide and increase the amount of chromium oxide and the ratio of $Cr_2O_3/Cr(OH)_3$ and make the film stable and dense.

• The Journal of the Acoustical Society of Korea
• /
• v.24 no.2E
• /
• pp.61-66
• /
• 2005

Experimental work in underwater acoustic communications using passive phase conjugation has shown that the demodulation error depends on the relative drift rate between the source and receiver [Rouseff et al., IEEE J. Oceanic Eng. 26, 821-831 (2001)]. The observed effect involves the mismatch between the initial impulse response and the subsequent response after the source or receiver has changed locations. In the present work, the effect of drifting source is analyzed by numerical simulations and compared to the experimental results. The communications bit error rate is qualified as a function of drift rate, drifting direction, and source-receiver range.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.36 no.2
• /
• pp.140-147
• /
• 1987

In this paper, seven-order elliptic low-pass passive network is synthesized by using doublyterminated ladder network is directly transformed into the active network which has the advantage of low sensitivity and can be realized conveniently. The circuit simulation results of passive network and active network synthesized with FDNR and Leap-frog technique are compared, and it is proved that the two rest work has the same characteristics.

• Safety and Health at Work
• /
• v.14 no.1
• /
• pp.85-92
• /
• 2023

Background: Presenteeism is closely related to work performance, work quality and quantity, and productivity at work. According to the job demand-control-support model, job demand, job control, and support play important roles in presenteeism. The present study investigated job characteristics profiles based on the job demand-control-support model and identify the association between job characteristics profiles and presenteeism. Methods: This secondary data analysis used the Sixth Korean Working Condition Survey, a nationwide cross-sectional dataset. The study included 25,361 Korean wage workers employed in the workplace with two or more workers. Participants were classified into four job characteristics profiles based on the job demand-control-support model, using latent profile analysis, and logistic regression was performed to examine the association between study variables. Results: Overall, 11.0 % of study participants reported experience of presenteeism in the past 12 months. Age, sex, location, monthly income, shift work, work hours, health problems, and sleep disturbances were significantly associated with presenteeism. The rate of presenteeism was the highest in the passive isolate group. The passive collective, active collective, and low-stain collective groups had a 23.0%, 21.0%, and 29.0% lower likelihood of experiencing presenteeism, respectively, than the passive isolate group. Conclusions: The job demand-control-support profiles and the risk of presenteeism were significantly associated. The most significant group that lowered the experience of presenteeism was the low-strain collective group, which had a low level of demand and high levels of control and support. Therefore, we need a policy to reduce job demand and increase job control and support at the organizational and national levels.

• Structural Engineering and Mechanics
• /
• v.82 no.4
• /
• pp.417-434
• /
• 2022

In this work, a review of mechanical metamaterials and seismic protection systems that use them is carried out, focusing on passive protection systems. During the last years, a wide variety of classical systems of seismic protection have demonstrated to be an effective and practical way of reducing the seismic vulnerability of buildings, maintaining their health and structural integrity. However, with the emergence of metamaterials, which allow obtaining uncommon mechanical properties, new procedures and devices with high performance have been developed, reducing the seismic risk through novel approaches such as: seismic shields and the redirection of seismic waves; the use of stop band gaps and the construction of buried mass resonators; the design of pentamodal base isolators. These ideas are impacting traditional areas of structural engineering such as the design and building of highly efficient base isolation systems. In this work, recent advances in new seismic protection technologies and researches that integrate mechanical metamaterials are presented. A complete bibliometric analysis was carried out to identify and classify relevant authors and works related with passive seismic protection system based on mechanical metamaterial (pSPSmMMs). Finally, possible future scenarios for study and development of seismic isolators based on mechanical metamaterials are shown, identifying the relevant topics that have not yet been explored, as well as those with the greatest potential for future application.

• Applied Chemistry for Engineering
• /
• v.16 no.2
• /
• pp.275-281
• /
• 2005

In this work, Scalar Passive code in Lattice Boltzmann Method was employed to simulate mixing performance of Passive mixer in a micro-channel. It physically analyzed stream line and Pressure drop for passive mixer in a micro-channel. The flow characteristics in a micro-channel was a function of Peclet number. The results indicated that the size of static element was more effect on the mixing than the number of static element and the distance of static elements.

• International Journal of Safety
• /
• v.3 no.1
• /
• pp.27-31
• /
• 2004

Some of the petroleum products contain benzene which is well known as a confirmed human carcinogen. For example, gasoline products contain benzene ranging up to several percents by weight. High exposures to the benzene and other organic solvents would be likely to occur during intermittent tasks and or processes rather than continuous jobs such as sampling, repair, inspection, and loading/unloading jobs. The work time for these jobs is various. However, most of work time is very short and the representative time interval is 15 minutes. Thus, it is preferable to do exposure assessment for 15 minute time weighted average which is known as a short time exposure level(STEL) by ACGIH rather than for 8-hours TWA. It is particularly significant to the exposure monitoring for benzene since it has been known that the exposure rate plays an important role to provoke the leukemia. Due to the large variations, a number of processes/tasks, the traditional sampling technique for organic solvents with the use of the charcoal and sampling pumps is not appropriate. Limited number of samples can be obtained due to the shortage of sampling pumps. Passive samplers can eliminate these limitations. However, low sampling rates resulted in collection of small amount of the target analysts in the passive samplers. This is originated the nature of passive samplers. Field applications were made with use of passive samplers to compare with the charcoal tube methods for 15 minutes. Gasoline loading processes to the tank lorry trucks at the loading stations in the petroleum products storage area. Good agreements between the results of passive samplers and those of the charcoal tubes were achieved. However, it was found that special cautions were necessary during the analysis at very low concentration levels.