• Journal of applied mathematics & informatics
• /
• v.19 no.1_2
• /
• pp.439-445
• /
• 2005

This paper is to investigate the approximate confidence limits of the reliability performances (such as failure rate, reliability function and average life) for a cold standby series system. The Bayesian approximate upper confidence limit of failure rate is obtained firstly, and next Bayesian approximate lower confidence limits for reliability function and average life are presented. The expressions for calculating Bayesian lower confidence limits of the reliability function and average life are also obtained, and an illustrative example is examined numerically by means of the Monte-Carlo simulation. Finally, the accuracy of confidence limits is discussed.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.1
• /
• pp.145-150
• /
• 2017

This paper present a unified method of steady state performance analysis and limits characteristics of an autonomous three-phase self-excited induction generator (SEIG) driven by a wind turbine under different types of loads and speeds. The proposed method is based on a new mathematical function to solve for the real and imaginary components of the complex equation of the mathematical model. Performances limits, regulation and characteristics of different configurations will be thoroughly examined and compared. The proposed system will be modeled and simulated and the performance limits characteristics will be compared with variable speed and variable capacity.

• Advances in materials Research
• /
• v.11 no.3
• /
• pp.237-250
• /
• 2022

The cone bolts with expanded front ends supply improved anchoring performances and increase energy absorbing capacities due to ploughing in the grouted drills. Within this study, use of a novel energy absorber for the cone bolt heads were investigated to assess its design in terms of supplying high support performances. Additionally, different grout material designs were tested to investigate whether the energy absorption capacities of the rock bolts can be improved using a silicone based thermoset polymer (STP) additive. To determine load bearing and energy absorption capacities, a series of deformation controlled pull-out tests were carried out by using bolt samples grouted in rock blocks. According to the results obtained from this study, maximum load bearing capacities of cone bolts are similar and mostly depend on the steel material strength, whereas the energy absorption capacity was determined to significantly vary in accordance with the displacement limits of the shanks. As a result of using STP additive and new polyamide absorber rings, displacement limits without the steel failure increase. The STP additive was found to improve the energy absorption capacities of grouted cone bolts. The absorber rings designed within this study were also assessed to be highly effective and able to double up the energy absorption capacities of the cone bolts.

• Journal of Korean Society for Quality Management
• /
• v.34 no.4
• /
• pp.125-132
• /
• 2006

An adjusted control limit of the $\overline{X}$ chart is proposed for monitoring the continually improving processes. The continual improvement of the process implies the decrease of the process variance, which is represented by a logistic curve. The process standard deviation is estimated by the exponentially weighted moving average of the sample standard deviations from the past to the current times. The control limits are adjusted by the estimated standard deviation at every sampling time. The performance of the adjusted control limit is compared with that of the standard control limits for various cases of the decreasing speed and size of the variance. The results show that the $\overline{X}$ chart with the adjusted control limits provides better performances for monitoring the small and moderate shifts in continually improving processes.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.24 no.67
• /
• pp.11-18
• /
• 2001

The efficiency and robustness of the scale estimator based on the Gini's mean difference are well known in Nam et al.(2000). In this paper we propose use of robust control limits based on the Gini's mean difference for the control of the process deviation. To compare the performances of the proposed control chart with the existing R-chart or S-chart, some Monte Carlo simulations are performed. The simulation results show that the use of the Gini's mean difference in construction of the control limits has good performance.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.23 no.2
• /
• pp.15-20
• /
• 2015

This paper introduces a new airspace design method for continuous climb operation (CCO). The optimization problem is formulated as Mixed-Integer Linear Program (MILP) to maximize the upper limits of altitude on the waypoints to facilitate continuous climb for aircraft. In the proposed method, the interactions with other flight procedures are considered as well as various aircraft flight performances. The proposed method is applied to one of the departure procedures of Incheon International Airport (ICN) to demonstrate its performances.

• Journal of Korea Multimedia Society
• /
• v.19 no.8
• /
• pp.1377-1385
• /
• 2016

Conventional X-band marine radar has been used as one of the effective tools for collecting and retrieving ocean surface information parameters for three decades. Several wave information extracting algorithms have been designed in such a way that they can be utilized for efficiently estimating sea surface wave parameters such as current velocities, wave direction, significant wave heights in VTS (Vessel Traffic Service). However, their performances are still restricted. For the purpose of overcoming the performance limits, in this paper, first the conventional algorithms are analyzed and their performances are compared, and then a new control algorithm is proposed. Furthermore, we try to improve the estimation performances of typical wave parameters including wave directions and significant wave heights by introducing linear regression model in the process of computing wave information extraction. Through several simulations with the X-band radar images, it is shown that the proposed method is very effective in estimating the wave information compared to the real measured buoy data.

• Journal of Astronomy and Space Sciences
• /
• v.36 no.3
• /
• pp.213-223
• /
• 2019

This paper analyzes delta-Vs to maintain an extremely low altitude on the Moon and investigates the possibilities of performing a CubeSat mission. To formulate the station-keeping (SK) problem at an extremely low altitude, current work has utilized real-flight performance proven software, the Systems Tool Kit Astrogator by Analytical Graphics Inc. With a high-fidelity force model, properties of SK maneuver delta-Vs to maintain an extremely low altitude are successfully derived with respect to different sets of reference orbits; of different altitudes as well as deadband limits. The effect of the degree and order selection of lunar gravitational harmonics on the overall SK maneuver strategy is also analyzed. Based on the derived SK maneuver delta-V costs, the possibilities of performing a CubeSat mission are analyzed with the expected mission lifetime by applying the current flight-proven miniaturized propulsion system performances. Moreover, the lunar surface coverage as well as the orbital characteristics of a candidate reference orbit are discussed. As a result, it is concluded that an approximately 15-kg class CubeSat could maintain an orbit (30-50 km reference altitude having ${\pm}10km$ deadband limits) around the Moon for 1-6 months and provide almost full coverage of the lunar surface.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.1
• /
• pp.15-26
• /
• 2014

This paper proposes a Modified Particle Swarm Optimization with Time Varying Acceleration Coefficients (MPSO-TVAC) for solving economic load dispatch (ELD) problem. Due to prohibited operating zones (POZ) and ramp rate limits of the practical generators, the ELD problems become nonlinear and nonconvex optimization problem. Furthermore, the ELD problem may be more complicated if transmission losses are considered. Particle swarm optimization (PSO) is one of the famous heuristic methods for solving nonconvex problems. However, this method may suffer to trap at local minima especially for multimodal problem. To improve the solution quality and robustness of PSO algorithm, a new best neighbour particle called 'rbest' is proposed. The rbest provides extra information for each particle that is randomly selected from other best particles in order to diversify the movement of particle and avoid premature convergence. The effectiveness of MPSO-TVAC algorithm is tested on different power systems with POZ, ramp-rate limits and transmission loss constraints. To validate the performances of the proposed algorithm, comparative studies have been carried out in terms of convergence characteristic, solution quality, computation time and robustness. Simulation results found that the proposed MPSO-TVAC algorithm has good solution quality and more robust than other methods reported in previous work.

• Journal of Korean Clinical Nursing Research
• /
• v.20 no.2
• /
• pp.223-235
• /
• 2014

Purpose: Resuscitation rooms in emergency department are places for time-critical tasks. This study aimed 1) to develop a resuscitation protocol for dyspneic patients and 2) to evaluate the effect of the resuscitation protocol for dyspneic patients in improving clinical performances. Methods: A panel of experts including emergency physicians and nurses developed a resuscitation protocol for dyspneic patients which included a list of critical interventions and time-limits. The resuscitation protocol was implemented in a emergency medical center for two months. Clinical performances of health care providers were compared by analyzing video-recorded clinical performances. Results: The resuscitation protocol consisted of four steps: Initial treatments within 5 minutes, main treatments within 15 minutes, diagnostic tests within 30 minutes, and disposition within 60 minutes. A total of 43 dyspneic patients (23 patients experimental group, 20 patients control group) were included for the analysis of the clinical performance change. Clinical performance rates were improved significantly from control group (66.71%) to experimental group (82.41%) after implementing the resuscitation protocol (Z=-3.09, p=.004). Conclusion: The resuscitation protocol developed for dyspneic patients improved clinical performance rates of health care providers. Further development of clinical protocols for other emergent cases at resuscitation rooms are strongly recommended.