• 제목/요약/키워드: Periodic Inspection

검색결과 175건 처리시간 0.026초

자동차 정기검사 주기에 관한 고찰 (A Consideration on the Inspection Frequency of the Periodic Technical Vehicle Inspection)

  • 임재문;정영달;여운석;강병도;윤영한
    • 자동차안전학회지
    • /
    • 제4권2호
    • /
    • pp.17-21
    • /
    • 2012
  • The periodic technical vehicle inspection is to prevent the accident through the finding and fixing the defects of the vehicle. The periodic technical vehicle inspection in Korea was studied for assessing the adequacy of the inspection frequency. The inspection frequencies of many countries including EU, USA and Japan were compared. The average mileages by the vehicle usage and type were represented. The warranty period and recommended replacement period of parts of the domestic auto makers was studied. Currently, the inspection frequency for the periodic technical vehicle inspection in Korea is appropriate. The pass-fail rate and the cost-benefit analysis for the periodic technical inspection in Korea will be needed in the decision making process for the inspection frequency.

Review of the regulatory periodic inspection system from the viewpoint of defense-in-depth in nuclear safety

  • Lim, Jihan;Kim, Hyungjin;Park, Younwon
    • Nuclear Engineering and Technology
    • /
    • 제50권7호
    • /
    • pp.997-1005
    • /
    • 2018
  • The regulatory periodic safety inspection system is one of the most important methods for confirming the safety of nuclear power plants and the defense in depth in nuclear safety is the most important basic means for accident prevention and mitigation. Recently, a new regulatory technology based on risk-informed and safety performance has been developed and used in advanced countries. However, since the domestic periodic inspection system is being used in the same way over 30 years, it is necessary to know how the inspection contributes to the safety confirmation of the nuclear power plants. In this study, the domestic periodic inspection system currently in use was analyzed from the perspective of defense in depth in nuclear safety. In addition, the analysis results were compared to the U.S. NRC's safety inspection system to obtain consistency and lessons in this study. As a result of analysis, the NRC's safety inspections were distributed almost evenly at the all levels of defense in depth, while in the case of domestic inspection, they were heavily focused on the level 1 of defense in depth. Therefore, it appeared urgent to improve the inspection system to strengthen the other levels of defense in depth in nuclear safety.

정기검사정책과 개선에 관한 연구 (A Study on the Periodic Inspection Policy and Its Improvement)

  • 임평순;서용성;박영택
    • 품질경영학회지
    • /
    • 제22권4호
    • /
    • pp.40-58
    • /
    • 1994
  • Some systems such as early warning system should be inspected occasionally in order to detect failures. If the system is inspected too frequently, inspection cost increases. On the other hand, if the number of inspections is reduced too much, the undetected system downtime cost increases. Thus, it is of interest to find effective inspection schedule, which minimizes the sum of inspection and downtime costs. When the system has increasing failure rate, inspection intervals get shorter as time goes on. But a common practice is to inspect the system at predetermined periodic intervals. In this paper, periodic inspection policy and a modified periodic inspection policy are considered. The modified policy is easily applicable and cost-effective. Some numerical examples are included in order to explain the modified inspection ploicy and its cost performance.

  • PDF

AEBS와 LDWS가 장착된 대형버스의 정기검사를 위한 검사요소 개발 (Development of Inspection Elements for the Periodic Inspection of Large Buses with AEBS and LDWS Installed)

  • 박상협;한종호;윤윤기;이태희;이호상;강병도
    • 자동차안전학회지
    • /
    • 제13권2호
    • /
    • pp.42-49
    • /
    • 2021
  • In this paper, we proposes a study on the derivation of inspection factors for the periodic inspection of large buses equipped with AEBS and LDWS. we investigate the safety evaluation (NCAP) of domestic and foreign vehicles and safety standards for the two functions currently in operation and analyze the evaluation factors, measurement methods and evaluation scenarios and so on. In addition, the test scenario was derived by analyzing the vehicle safety evaluation data already held, Therefore, we use an real large bus and the inspection elements for the periodic inspection were derived.

수시점검 및 정기검사 시 고장의 중복을 배제한 유도탄 저장신뢰도 예측 모델 (Storage Reliability Prediction Model for Missile subjected to Non-periodic Test and Periodic Inspection excluding Overlapped Failures)

  • 조보람;안장근
    • 한국산학기술학회논문지
    • /
    • 제19권5호
    • /
    • pp.599-604
    • /
    • 2018
  • 유도무기체계에서 특히 유도탄은 높은 신뢰도 및 가용도의 유지와 함께 경제적인 정비가 매우 중요한 무기체계이다. 대한민국 소요군에서는 야전에 배치된 모든 유도탄에 대해 정기적인 검사를 필수적으로 수행하고 있다. 정기적인 주기마다 야전에 배치된 모든 유도탄은 정비부대로 보내져 검사되고 혹은 검사 시 고장이 발견된다면 수리된다. 그리고 유도탄은 수시적으로 수행 가능한 자체점검의 기능을 보유하고 있다. 유도탄이 보유한 자체점검으로 유도탄이 발사대에서 운용될 동안이나 저장되어 있는 동안에 고장을 발견해 낼 수 있다. 그러므로 유도탄의 신뢰도와 정비 비용은 검사주기의 기간과 자체점검 및 정기검사의 수준에 매우 영향을 받음을 알 수 있다. 본 논문에서는 수시점검과 정기검사를 받는 유도탄의 저장신뢰도를 예측하는데 있어 기존에 연구된 모델을 수정하여 고장의 중복을 배제한 새로운 유도탄 저장신뢰도 예측 모델을 제시하였다. 그리고 수치적 예시를 들어 새롭게 제시한 모델의 특성을 분석하였다. 또한, 제시된 모델은 검사주기 기간을 결정하는데 유용하게 활용될 수 있다.

신호설비 정기검사 절차서 작성에 대한 보고 (A report on the preparation of signaling equipment procedures for the periodic inspection)

  • 고양옥;서문석
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 2008년도 춘계학술대회 논문집
    • /
    • pp.623-629
    • /
    • 2008
  • A periodic inspection for facilities in operation is an inspection that is carried out regularly, in which inspection cycles are drawn up, and it is a series of tests to determine if the condition of all the equipment is maintained, and to identify whether they are to be used or replaced. Reliability should be enhanced, without a breakdown, by preliminary inspection and regular checks for each equipment item installed for equipment maintenance. It was noticed that there was a slight difference for the same facility, and for each organization in terms of inspection cycles and methods while preparing procedures of periodic inspection checklist, inspection methods and cycles for a related organization. Therefore, this paper reviews the optimal methods of inspection procedures for Seoul Metro.

  • PDF

신뢰도 분석모델을 이용한 대함유도탄 검사주기 결정에 관한 연구 (A Study on Determining the periodic inspection for Anti-Ship Missile by using Reliability Analysis Model)

  • 김대익;전건욱
    • 한국국방경영분석학회지
    • /
    • 제32권2호
    • /
    • pp.92-113
    • /
    • 2006
  • 무기체계는 최근 고도의 신기술과 막대한 비용이 투자되어 첨단화, 정밀화, 장사정화, 은밀화, 복합 기능화의 특징을 가진 고비용 무기체계로 변화하고 있다. 이에 따라 유도무기체계의 경우도 경제적인 운용과 사용자의 안전성을 보장하는 측면에서 고도의 신뢰성이 보장되어야 한다. 따라서 유도무기 체계를 개발하고 생산하는 단계에서의 신뢰도 평가뿐만 아니라 주어진 저장 환경조건이나 운용환경에서의 일정한 저장 신뢰도의 유지를 위한 기준이 제시 되고 이를 유지하기 위한 최적화된 검사주기가 필요하다고 할 수 있다. 본 연구는 현재 해군에서 운용중인 대함 유도탄(Harpoon Block 1)을 대상으로 검사주기 간 고장건수 및 정비현황을 기초로 수학적 기법과 신뢰도 분석 S/W를 활용하여 저장고장률과 MTBF를 도출하고 이를 바탕으로 체계 운용유지를 위한 최적 검사주기를 결정하여 향후 대함 유도무기체계 신뢰도 예측 및 평가를 통한 검사주기 개선방안을 제시하였다.

주기적 검사가 실시되는 원샷 시스템의 신뢰도 분석 (Reliability Analysis for One-Shot Systems with Periodic Inspection)

  • 김하원;윤원영
    • 대한산업공학회지
    • /
    • 제42권1호
    • /
    • pp.20-29
    • /
    • 2016
  • This paper considers one-shot systems such as missiles, air bags of automobiles that are stored for a long time and are used at most once. One shot systems are inspected periodically to detect system failures and repair the system because we do not know whether the system will work or not on demand. Thus, we can keep high availability of the system by periodic inspection. Martinez (1984) obtained the system reliability approximately. In this paper, we obtain the exact system reliability under periodic inspection. Finally, we compare the system reliability from our formula with one of Martinez (1984) by numerical examples.

Optimal Inspection Period for the System Subject to Random Shocks

  • Kim, Sung-Soon;Choi, Seung-Kyoung;Lee, Eui-Yong
    • Journal of the Korean Data and Information Science Society
    • /
    • 제16권4호
    • /
    • pp.725-733
    • /
    • 2005
  • A system subject to random shocks is considered. The shocks arrive according to a Poisson process and the amount of each shock is exponentially distributed. In this paper, a periodic inspection policy for the system is compared with a random inspection policy. After assigning several maintenance costs to the system, we calculate and compare the long-run average costs per unit time under two policies.

  • PDF

저장신뢰도 유지를 위한 최적 2단계 주기적 검사정책 (Optimal Two-Stage Periodic Inspection Policy for Maintaining Storage Reliability)

  • 조용석;이주호
    • Communications for Statistical Applications and Methods
    • /
    • 제15권3호
    • /
    • pp.387-402
    • /
    • 2008
  • 본 연구에서는 장기간 보관 중인 장비의 신뢰도를 유지하기 위한 2단계 주기적 검사모형을 제안하였다. 제안된 모형은 불완전한 간이검사와 완전한 정밀검사를 단계적으로 사용하여 고장이 발견되거나 검사 후 저장신뢰도가 미리 정해진 값 이하로 떨어질 때 장비에 대한 오버홀을 수행한다. 제안된 모형을 사용하여 오버홀까지의 단위시간당 기대비용을 유도하고 이를 최소화하기 위한 절차를 구하였으며, 고장시간이 지수분포 및 와이블분포를 따를 경우 제안된 모형을 1단계 주기적 검사모형과 비용함수의 다양한 모수값에 대하여 비교하였다. 또한 실제 운용 중인 유도탄 시스템에 제안된 검사정책을 적용하여 현재 사용 중인 검사정책과의 비교를 수행하였다.