• 제목/요약/키워드: Phase wrapping

검색결과 19건 처리시간 0.027초

Software Designing Simulator for Controlling Multiple-Mechanism Carrier System

  • Nakamura, Kotaro;Kumagai, Koji;Sato, Seiji;Sato, Shoichi
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 2000년도 제15차 학술회의논문집
    • /
    • pp.450-450
    • /
    • 2000
  • This paper presents a software design simulation method for controlling multiple mechanism carrier system (MMCS), which is mainly used in a wrapping machine or a case packing machine. This method uses a mechanical tool-work interactive model proposed in this paper, in order to represent the interactive behaviors between some tools and a work driven by their tools, in which low effect states of a work are defined. Based on this method, a 3-D simulation system has been built. It consists of shape modeling of each device, behavior definitions of tools, and control logic using if-then expression. By applying it to a ase packing machine having about 30 mechanical devices and 100 inputs/outputs for control, the effectiveness of this method has been shown in general verification of control logic specification in an early software design phase and the possibility of smooth communication tool between mechanical and software designers.

  • PDF

박판 자성 재료를 이용한 전력 케이블 인근의 자기장 차폐 (Magnetic Shielding with Thin Magnetic Materials near Power Cables)

  • 김상범;소준영;신구용;정진혜;명성호
    • 한국전자파학회논문지
    • /
    • 제20권7호
    • /
    • pp.639-647
    • /
    • 2009
  • 본 연구에서는 자기장 차폐를 위하여 3상 전력 케이블을 얇은 자성 판재로 둘러싸는 방법을 제안한다. 두꺼운 상용 뮤-메탈, 방향성 및 무방향성 규소 강판을 출발 재료로 하여 두께 0.1 mm의 차폐재 3종류를 제조하였다. 3상 전류일 때, 차폐재 위치의 자기장이 100 ${\mu}T$ 정도이면 뮤-메탈이 (SF<0.1) 가장 효과적이었고, 500 ${\mu}T$ 이상 이면 규소 강판이 (SF 0.3${\sim}$0.4) 더 효과적이었다. 또한, 안쪽에 방향성 규소 강판, 바깥쪽에 뮤-메탈을 함께 둘러쌀 경우 500 ${\mu}T$까지도 SF 를 0.1 이하로 할 수 있었다. 한편, 단상 전류에서는 고 투자율 소재의 적용은 오히려 자기장을 증가시키는 결과를 보였다. 이상의 결과는 자기장 강도 H의 크기에 따라 각 소재의 투자율 우열이 서로 다른 점과 이로 인해 차폐재 내에 유도되는 자기장 벡터와 원래의 자기장 벡터의 상호 상쇄 및 중첩 작용으로 설명할 수 있었다.

The 1970's Fashion Trend at Vogue Magazine: If you can't wrap it, tie it, sling it, fling it

  • Ahn, Insook
    • 패션비즈니스
    • /
    • 제17권6호
    • /
    • pp.76-87
    • /
    • 2013
  • The purpose of this study is to understand how the silhouette changed throughout 1970s and assess how US women express their identities through their dress, which may explain societies' attitudes through the way women dresses. US Vogue fashion magazines were used to explore all the information on fashion and style trends, social trends, beauty, and travel. A content analysis was performed on the issues of the March and September for the years 1970 to 1979. The findings for this study about the 1970s were all about perpetual change, constantly moving forward with innovation. The color ranged from bright, cheery and bold to deep and passionate to subtle neutrals. There were a few constant colors through the decade like white, black and navy. Occasionally the trend would completely change from one season to the next within the same year. They would be full and oversized and then be slim and body conscious. The one trend that stayed true for the entire decade was wrapping. Skirts, pants, dresses, tops, shoes and jewelry; everything wrapped in one-way or another. Clothes steadily became more revealing as the years progressed. Fabrics over all were soft and knitted. Casual and comfortable was the phase heard most often. In the 1970s there was constant change in prints. They were bold and large or subtle and small, ethnic or floral. Hair was mostly smooth and sleek however towards the style moved to a fuller look.

$TiO_2$ Nanotubes Preparation and Its Formation Mechanism

  • Kang, Young-Gu;Shin, Ki-Seok;Ahn, Sung-Hwan;Hahm, Hyun-Sik
    • 한국응용과학기술학회지
    • /
    • 제27권4호
    • /
    • pp.487-493
    • /
    • 2010
  • There has been a controversy on the formation mechanism of $TiO_2$ nanotubes. This study was conducted to elucidate the formation mechanism of $TiO_2$ nanotubes. $TiO_2$ nanotubes were prepared by a hydrothermal method. $TiO_2$ nanotubes formation mechanism was investigated by controlling the formation time. It was found that $TiO_2$ nanotubes were formed by growing, not by wrapping of sheets. The phase structure of hydrogen titanate nanotubes was different from that of $TiO_2$ nanotubes. It is important to wash the sodium titanate nanotubes with an acidic solution to get hydrogen titanate nanotubes and then to calcine the hydrogen titanate nanotubes around $400^{\circ}C$ to obtain $TiO_2$ nanotubes.

Estimation of Instantaneous Sea Level Using SAR Interferometry

  • Kim, Sang-Wan;Won, Joong-Sun
    • 대한원격탐사학회지
    • /
    • 제18권5호
    • /
    • pp.255-261
    • /
    • 2002
  • Strong and coherent radar backscattering signals are observed over oyster sea farms that consist of artificial structures installed on the bottom. We successfully obtained 21 coherent interferograms from 11 JERS-1 SAR data sets even though orbital baselines (up to 2 km) or temporal baselines (up to 1 year) were relatively large. The coherent phases preserved in the sea farms are probably formed by double bouncing from sea surface and the sea farming structures, and consequently they are correlated with tide height (or instantaneous sea level). Phase unwrapping is required to restore the absolute sea level. We show that radar backscattering intensity is roughly correlated with the sea surface height, and utilize the fact to determine the wrapping counts. While the SAR image intensity gives a rough range of absolute sea level, the interferometric phases provide the detailed relative height variations within a limit of $2{\pi}$ (or 15.3 cm) with respect to the sea level at the moment of the master data acquisition. A combined estimation results in an instantaneous sea level. The radar measurements were verified using tide gauge records, and the results yielded a correlation coefficient of 0.96 with an r.m.s. error of 6.0 cm. The results demonstrate that radar interferometry is a promising approach to sea level measurement in the near coastal regions.

Center Array-Sequencing 위상펼침 기법의 MR 온도영상 적용에 관한 기초연구 (Preliminary Study on the MR Temperature Mapping using Center Array-Sequencing Phase Unwrapping Algorithm)

  • ;김태형;천송이;한용희;최기승;이광식;전재량;은충기;문치웅
    • Investigative Magnetic Resonance Imaging
    • /
    • 제12권2호
    • /
    • pp.131-141
    • /
    • 2008
  • 목적: 물체 내부의 온도를 비침습적으로 측정할 수 있는 양성자 공명 주파수 이동에 의한 MR 온도영상의 재구성에 center array-sequencing 위상펼침(PU) 기법을 적용시켜 그 성능 및 유용성을 평가하고자 하였다. 대상 및 방법: MR 온도 영상에 앞서 잡음 수준이 다른 타원형 팬텀들을 컴퓨터 모의 실험으로 제작하고 제안된 PU방 법을 적용시켜 잡음에 대한 성능을 평가하였다. MR 실험은 PU 실험과 이를 이용한 온도분포영상획득 실험으로 구분하여 수행되었다. 1.5T MR 영상장치에서 무릎코일과 $T2^*$ 경사자장에코 펄스열을 이용하여 MR 영상을 얻었다. 물통, 오렌지, 아가젤 등의 팬텀을 실험 대상으로 하였고 자체 제작된 온수펌프 장치로 팬텀의 온도를 조절하였다. T 형 열전쌍 온도측정장치로 팬텀 온도를 측정하고 MR 온도영상 결과와 비교하였다. 획득된 MR영상의 위상분포는 제안된 PU방법으로 위상을 편 후 온도분포 영상을 재구성하였다. 가열 전 후의 온도변화와 MR 영상의 위상변화 관계를 이용하여 아가젤 팬텀 내의 MR온도분포 영상을 구하였다. 결과: 제안된 center array-sequencing PU 알고리즘을 이용하여 여러 팬텀에 대한 MR 위상영상의 접힘 현상을 기존 방법보다 간편하고 빠르게 제거할 수 있었고 이를 이용하여 MR 온도영상을 획득할 수 있었다. 결론: 본 연구는 제안된 center array-sequencing 위상펼침 방법이 잡음에 강하고 처리 속도가 빠를 뿐만 아니라 양성자 공명 주파수 이동의 성질을 이용한 MR 온도 영상 획득에 성공적으로 적용될 수 있음을 보였다.

  • PDF

레거시로부터 CBD로의 재공학을 위한 메타 모델 설계 기법 (A Design Technique of Meta-Model for Reengineering from Legacy to CBD)

  • 김철진;조은숙
    • 한국멀티미디어학회논문지
    • /
    • 제8권3호
    • /
    • pp.398-412
    • /
    • 2005
  • 레거시 시스템을 새로운 하드웨어 플랫폼과 새로운 소프트웨어 개발 패러다임에 맞도록 이주하려는데 대한 관심이 증가하고 있다. 그 이유는 레거시 시스템의 유지보수에 많은 비용이 들고 기존 시스템에 대한 문서 정보가 부족하다는데 있다. 레거시 시스템을 새로운 시스템을 변환하기 위해 스크린 스크래핑, 래핑, 부분 변환, 재개발 등등의 여러 다양한 접근법들과 도구, 그리고 방법론들이 제시되어왔다. 그러나 이러한 접근법들은 대부분이 코드 변환 혹은 일부 모델 변환 수준이기 때문에 아키텍처나 요구사항 수준에서의 변환까지는 체계적으로 제시하지 못하였다. 따라서, 본 논문에서는 이러한 한계점을 극복하기 위하여 아키텍처와 요구사항 단계까지 적용할 수 있는 3차원 공간 개념을 적용한 메타 모델 기반의 접근법을 제시하고자한다. 이러한 통합 모델은 재 공학에 있어서 역 공학 단계인 코드에서 아키텍처 그리고 순 공학 단계인 아키텍처에서 코드로의 자연스러운 변환 혹은 협력 진화(Co-evoluton)를 유도한다.

  • PDF

Efficient repair of damaged FRP-reinforced geopolymeric columns using carbon fiber reinforced polymers

  • Mohamed Hechmi El Ouni;Ali Raza;Khawar Ali
    • Structural Engineering and Mechanics
    • /
    • 제87권6호
    • /
    • pp.585-599
    • /
    • 2023
  • Geopolymer concrete (GC) can be competently utilized as a practical replacement for cement to prevent a high carbon footprint and to give a direction toward sustainable concrete construction. Moreover, previous studies mostly focused on the axial response of glass fiber reinforced polymer (glass-FRP) concrete compressive elements without determining the effectiveness of repairing them after their partial damage. The goal of this study is to assess the structural effectiveness of partially damaged GC columns that have been restored using carbon fiber reinforced polymer (carbon-FRP). Bars made of glass-FRP and helix made of glass-FRP are used to reinforce these columns. For comparative study, six of the twelve circular specimens-each measuring 300 mm×1200 mm-are reinforced with steel bars, while the other four are axially strengthened using glass-FRP bars (referred to as GSG columns). The broken columns are repaired and strengthened using carbon-FRP sheets after the specimens have been subjected to concentric and eccentric compression until a 30% loss in axial strength is attained in the post-peak phase. The study investigates the effects of various variables on important response metrics like axial strength, axial deflection, load-deflection response, stiffness index, strength index, ductility index, and damage response. These variables include concentric and eccentric compression, helix pitch, steel bars, carbon-FRP wrapping, and glass-FRP bars. Both before and after the quick repair process, these metrics are evaluated. The results of the investigation show that the axial strengths of the reconstructed SSG and GSG columns are, respectively, 15.3% and 20.9% higher than those of their original counterparts. In addition, compared to their SSG counterparts, the repaired GSG samples exhibit an improvement in average ductility indices of 2.92% and a drop in average stiffness indices of 3.2%.

단열된 배관의 유도초음파 최적 발생조건 선정에 관한 연구 (A Study on the Optimum Generation Condition of Ultrasonic Guided Waves for Insulation Pipelines)

  • 이동훈;조현준;강토;박동준;김병덕;허윤실;이연재
    • 한국가스학회지
    • /
    • 제20권6호
    • /
    • pp.50-57
    • /
    • 2016
  • 배관은 석유화학플랜트에서 가장 많은 구성요소이며, 주요설비들에서 생산된 물질을 수송하는 매우 중요한 역할을 수행한다. 특히, 저온 또는 고온의 물질을 수송하는 배관들의 경우 물질의 온도변화를 최소화하기 위해 보온재를 배관의 외면에 덮어 사용하는 경우가 다수이다. 그러나 이러한 보온재에 덮인 배관들에서 부식이 발생할 경우 보온재를 제거하지 않고서는 확인하기 어렵기 때문에 현장검사시 유도초음파를 이용한 비파괴적 방법이 사용되고 있다. 본 논문에서는 보온재 내부에서 발생하는 보온재하 부식(CUI : Corrosion Under Insulation)을 유도초음파를 사용하여 효과적으로 검출하기 위해서 유도초음파의 위상속도 분산선도와 파형구조의 이론적 해석을 통해 최적 발생조건을 선정하고자 하였다. 본 연구의 결과는 다양한 석유화학플랜트 배관의 보온재하 부식에 대한 유도초음파를 이용한 현장검출에 적용할 경우 매우 유용할 것이다.