• 한국연초학회지
• /
• 제27권2호
• /
• pp.178-188
• /
• 2005

To use the filter materials for selective removal of carbonyl compounds in cigarette mainstream smoke, hydrazine such as 2,4-dinitrophenylhydrazine and dansylhydraznie impregnated adsorbents were prepared with perchloric acid or phosphoric acid as a accelerator in hydrazone formation reaction. The change of morphology of adsorbents in various of impregnator were investigated by SEM. Impregnation amount caused by reaction time, acid type and impregnation reagent, and the adsorption properties of carbonyl compounds in cigarette mainstream smoke were investigated. Amounts of impregnation was increased as increasing reaction time. The removal amount for vapor phase carbonyl compounds by 2,4-DNPH impregnated adsorbent was higher than that of dansylhydrazine impregnated adsorbent. The selectivity of 2,4-DNPH impregnated polyacrylic type adsorbent was superior to those of other adsorbents. This results indicated that the 2,4-DNPH impregnated polyacrylic adsorbent was applicable to cigarette filter material because of its fast reactivity and porosity.

• Carbon letters
• /
• 제10권1호
• /
• pp.23-32
• /
• 2009

The adsorption of phenolic compound resorcinol on activated carbons prepared from Moringa oleifera (Drumstick bark) has been investigated. Activated carbon was prepared by impregnating Moringa oleifera with 50% phosphoric acid in the ratio of 1:1 and 1:2(w/w), designated as MOAC1 and MOAC2. Equilibrium and isotherm studies were carried out. The influences of variables such as contact time, initial concentration of resorcinol, carbon dosage in the solution on percentage adsorption and adsorption capacity of the bark have been analysed. The equilibration time was found to be 4 h. Kinetics of resorcinol onto activated carbons was checked for pseudo first order and pseudo second order model. It was found that the adsorption of resorcinol follows pseudo second order kinetics for both MOAC1 and MOAC2. The isotherm data were correlated with isotherm models, namely Langmuir and Freundlich. Adsorption isotherms were satisfactorily fitted by both the Langmuir and Freundlich model for MOAC1 and MOAC2.

• 폴리머
• /
• 제30권3호
• /
• pp.210-216
• /
• 2006

담배 주류연 중 카보닐 화합물의 선택적 감소를 위한 필터 물질을 제조하기 위하여 하이드라존 반응에 있어서 촉진제로 사용되는 과염소산과 인산을 2,4-dinitrophenylhydrazine (2,4-DNPH)와 dansylhydrazine (DAH)과 함께 각각의 흡착제에 첨착시켰다. 제조된 첨착 흡착제의 구조는 FTIR/ATR을 이용하여 확인하였으며 SEM을 이용하여 표면을 관찰하였다. 또한 첨착 시간과 촉진제 그리고 첨착 시약에 따른 첨착량과 담배 주류연 중 카보닐 화합물의 흡착특성을 조사하였다. 첨착량은 첨착 시간에 따라 증가되었으며 2.4-DNPH를 첨착한 흡착제의 경우 다른 흡착제에 비해 카보닐 화합물의 제거 효율이 우수하였다. 또한 폴리아크릴계 흡착제에 2,4-DNPH를 첨착시킬 경우 다른 기재의 흡착제에 비해 우수한 제거 효율을 나타내었는데 이러한 결과들로부터 궐련필터로의 적용 가능성을 확인할 수 있었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 D
• /
• pp.1873-1875
• /
• 1999

The effects of electrode and matrix in the PAFC were investigated using AC-impedance spectroscopy. The performance of PAFC was determined by changing external electronic load. AC impedance measurement was carried out as functions of phosphoric acid impregnation temperature. operating temperature and matrix coating method using various cathodes ; 20%Pt/C, 20%Pt-Ni/C, 20%Pt-Co-Ni/C, 10%Pt-Fe-Co/C, and 20%Pt-Fe-Co/C From the analysis of measured impedance data, the interfacial resistance decreased with increasing operating temperature. and with decreasing impregnation temperature. As compared with the alloy catalysts, Pt catalyst showed a lower interfacial resistance. This consist with the cell performance.

• Carbon letters
• /
• 제8권2호
• /
• pp.101-107
• /
• 2007

Activated carbons were prepared by impregnation of crushed clean date pits in concentrated solutions of phosphoric acid or zinc chloride followed by carbonization in absence of air at $600^{\circ}C$. Steam-activated carbon was prepared by gasifying $600^{\circ}C$-carbonization product at $950^{\circ}C$ to a burn-off = 50%. KOH- activated carbon was prepared by impregnating date pitscarbonization product obtained at $450^{\circ}C$ in concentrated KOH solution followed by carbonization at $840^{\circ}C$. Textural properties of these carbons were determined from nitrogen adsorption at $-196^{\circ}C$ and the chemistry of the carbon surface was investigated by determination and of the surface carbon-oxygen (C-O) groups using bases of variable strength and dilute HCl. The adsorption of endosulphan at $27^{\circ}C$ on all the carbons prepared was undertaken. Adsorption of this pesticide at 32 and $37^{\circ}C$ was also undertaken for steam-activated and KOH-activated carbons. Phosphoric acid-activated carbons and steamactivated carbons are mainly microporous and have high surface concentration of C-O groups of acidic nature. Steamactivated and KOH-activated carbons exhibited surface areas > 1000 $m^2/g$ and contain micro and non-micrpores. The adsorption of endosulphan was related to the surface area of non-micropores and was retarded by the high concentration of surface C-O groups. The thermodynamic properties indicated the feasibility of the adsorption process and the possible regeneration of the carbon for further use.

• 한국추진공학회지
• /
• 제25권4호
• /
• pp.36-42
• /
• 2021

본 연구에서는 리오셀 섬유를 사용하여 연속식 흑연직물을 제조함에 있어, 리오셀 섬유에 phosphoric acid, ammonium phosphate, diammonium hydrogen, triammonium phosphate의 인계난연제를 처리 후 열중량, 푸리에변환적외선분광, C-핵자기공명분광, X-선 회절, 중량 분석을 통해 나타나는 물리적, 화학적 구조 변화에 대하여 고찰하였다. 인계난연제에 의한 열적 거동을 분석을 통해 내염화 공정의 온도, 가스, 처리시간 등에 대한 조건을 설정하였다. 연속식 내염화, 탄화, 흑연화 공정을 통해 인장강도 1,007.19±11.47 N/5 cm와 수율 25.3%의 흑연직물을 제조하였다.

• Carbon letters
• /
• 제11권3호
• /
• pp.192-200
• /
• 2010

Common reed (Fragmites australis), a local invasive grass, was investigated as a possible feedstock for the production of activated carbon. Dried crushed stems were subjected to impregnation with phosphoric acid (30, 40 and 50%) followed by pyrolysis at $400{\sim}500^{\circ}C$ with final washing and drying. Obtained carbons were characterized by determining: carbon yield, ash content, slurry pH, textural properties and capacity to remove color bodies from factory-grade sugar liquor. Produced carbons possessed surface area up to 700 $m^2/g$, total pore volumes up to 0.37 $cm^3/g$, and proved to be microporous in nature. Decolorization of hot sugar liquor at $80^{\circ}C$ showed degrees of color removal of 60 up to 77% from initial color of 1100~1300 ICU, at a carbon dose of 1.0 g/100 ml liquor. No correlation seems to hold between synthesis conditions and % R but depends on the degree of microporosity. A commercial activated carbon N showed a comparative better color removal capacity of 91%. Common reed proved to be a viable carbon precursor for production of good adsorbing carbon suitable for decolorization in the sugar industry, as well as in other environmental remediation processes.

• 공업화학
• /
• 제1권2호
• /
• pp.224-231
• /
• 1990

백금촉매의 분산을 향상시키기 위하여 카본블랙의 표면처리, 용매, 계면활성제 및 초음파분산기에 따른 효과를 고찰하였다. 카본블랙을 산화처리하여 카본블랙 표면에 친수성기인 작용기들을 도입함으로써 작용기들이 염화백금산 이온의 anchorage center역할을 하여 이 염화백금산을 환원시킬 때 백금입자(이온)의 이동이나 성장을 억제시켜 미립화 시킬 수 있다고 생각되었다. 혼합용매, 계면활성제, 초음파분산기 등을 이용한 경우, 염화 백금산이온이 anchorage center 역할을 하고 있는 작용기들에 까지 잘 스며들어감으로써 백금촉매의 분산성이 향상됨을 알았다. 혼합용매에 초음파분산기를 사용하여 공기산화시킨 카본블랙에 백금촉매를 담지시킨 결과, 분산성이 가장 우수하였으며 입자크기는 $30A^{\circ}$ 이하로 미립화 되었다.

• 한국수소및신에너지학회논문집
• /
• 제19권1호
• /
• pp.18-25
• /
• 2008

The membrane electrode assembly(MEA) was prepared by a nonequilibrium impregnation- reduction (I-R) method. Nafion 117 and covalently cross-linked sulfonated polyetherether with tungsto- phosphoric acid (CL-SPEEK/TPA30) prepared by our laboratory, were chosen as polymer electrolyte membrane(PEM). $Pt(NH_3)_4Cl_2$, $RuCl_3$ and reducing agent $(NaBH_4)$ were used as electrocatalytic materials. Electrochemical activity surface area(ESA) and specific surface area(SSA) of Pt cathodic electrode with Nafion 117 were $22.48m^2/g$ and $23.50m^2/g$ respectively under the condition of 0.8 M $NaBH_4$. But Pt electrode prepared by CL-SPEEK/TPA30 membrane exhibited higher ESA $23.46m^2/g$ than that of Nafion 117. In case of Pt-Ru anodic electrode, the higher concentration of Ru was, the lower potential of oxygen reduction and region of hydrogen desorption was, and Pt-Ru electrode using 10 mM $RuCl_3$ showed best properties of SSA $34.09m^2/g$ with Nafion 117. In water electrolysis performance, the cell voltage of Pt/PEM/Pt-Ru MEA with Nafion 117 showed cell property of 1.75 V at $1A/cm^2$ and $80{\circ}C$. On the same condition, the cell voltage with CL-SPEEK/TPA30 was the best of 1.73 V at $1A/cm^2$.