• Title/Summary/Keyword: Photoresist

Search Result 431, Processing Time 0.042 seconds

Synthesis and Photosensitive Characterization Comparison by Gray Scale of Photoresist for Printing Plate;Study of the Photoresist for Printing Plate[II] (인쇄 제판용 Photoresist의 합성과 G.S법에 의한 감광특성 비교;인쇄 제판용 Photoresist의 연구[II])

  • Lee, Ki-Chang
    • Journal of the Korean Applied Science and Technology
    • /
    • v.14 no.2
    • /
    • pp.27-34
    • /
    • 1997
  • Naphthoquinone-1,2-diazide-5-sulfonyl [NDS]derivatives members of Quinone diazide compound that are utilizable as photoresist for printing plate were synthesized, and photoresist were prepared by mixing these derivatives with a matrix resin(PF, CF) at various weight ratios. Photosensitive characteristics of photoresist were studied by Gray scale method, and SEM to analyze if they can be used as photosensitive material in a printing plate. Experimental results showed using IR, UV, NDS derivatives were photoconverted and developer-soluble photoresist were produced. Photoresist in the mixing ratio of 1:4 of NDS[II] and CF resin gave rise to the highest dissolution rate. In addition, photoresist obtained at this condition resulted in the most superior sensitivity.

A development of fabrication processes of microstructure using SU-8 PR (SU-8 PR을 이용한 마이크로 구조물 제작 공정 개발)

  • 김창교;장석원;노일호
    • Journal of the Korean Crystal Growth and Crystal Technology
    • /
    • v.13 no.2
    • /
    • pp.68-72
    • /
    • 2003
  • In this paper, we developed a new thick photoresist fabrication technology for 3-dimensional microstructures. In general, like as AZ photoresist was coated with thin film thickness about 1 $\mu\textrm{m}$ to 30 $\mu\textrm{m}$, but photoresist like SU-8 has thickness of several tens $\mu\textrm{m}$ or more and high aspect ratio. When we fabricate a microstructure using the thick photoresist like SU-8, cracks on the SU-8 thick photoresist are appeared by stress which was caused by sudden cooling down during bake of the thick photoresist spun on wafer. Thus, it was hard to fabricate the microstructure using the thick photoresist for electroplating. In this paper, we developed a new process to produce a 3-dimensional microstructure without the crack by stress through a suitable thick photoresist coating, time control of cool down and time control of PEB (Post Expose Bake).

Fabrication of 3-D microchannel for biomems and micro systems application (바이오 멤스 및 마이크로 시스템 적용을 위한 3차원 마이크로 유로 제작)

  • Yun, Kwang-Seok
    • Journal of Sensor Science and Technology
    • /
    • v.15 no.5
    • /
    • pp.357-361
    • /
    • 2006
  • This paper reports a new technology to implement complex PDMS microchannels, which are simply constructed using three-dimensional photoresist structures as mold for PDMS replica process. The process utilizes LOR resist as a sacrificial layer to levitate the structural photoresist and multi-step exposure to control the thicknesses of photoresist structures. Various shapes of photoresist structures were successfully fabricated. Using the PDMS replica method, the three-dimensional photoresist structures are demonstrated to be applicable for implementing complex microchannels in PDMS. In addition, more complex multilevel microchannels are constructed by bonding two PDMS layers with just single PDMS alignment.

The Characteristics of Photoresist using Inorganic $a-Se_{75}Ge_{25}$ (무기질 $a-Se_{75}Ge_{25}$ 을 이용한 포토레지스트의 특성)

  • Chung, Hong-Bay;Huh, Hun;Kim, Tae-Wan;Hoon, Hyuk;Song, Joon-Suk;Kim, Jong-Been
    • Proceedings of the KIEE Conference
    • /
    • 1987.11a
    • /
    • pp.197-199
    • /
    • 1987
  • This paper is investigated on characteristics of photoresist using inorganic a-$Se_{75}Ge_{25}$. The sensitivity of negative photoresist showing insolubility against alkalie solution, with Ag-photodoped, is more prominent than that of positive photoresist used with only a-$Se_{75}Ge_{25}$. It is also showed that the contrast of negative photoresist, ${\gamma}=2.9$, is more prominent than that of positive photoresist, ${\gamma}=1.4$.

  • PDF

Photolithography Process of Organic Thin Film with A New Water Soluble Photoresist

  • Kim, Kwang-Hyun;Song, Chung-Kun
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 2004.08a
    • /
    • pp.1038-1039
    • /
    • 2004
  • We developed a new photoresist which was composed of polyaniline, uv-curing agent, N-methyl-2- pyrrolidine (NMP) and N-Butyl alcohol (BuOH) as solution. The photoresist is characterized by the capability of being developed in water. We successfully patterned pentacene thin film, which was vulnerable to organic solvent and thus could not be patterned by the conventional photolithography process, with the water soluble photoresist and the minimum feature size was found to be 2um.

  • PDF

A Study on Variation of the Sidewall Angle of a Thick Photoresist on the Wavelength and the Proximity gap (노광파장과 근접거리에 따른 두꺼운 감광막의 측면기울기 변화에 관한 연구)

  • 한창호;김학;김현철;전국진
    • Journal of the Semiconductor & Display Technology
    • /
    • v.3 no.1
    • /
    • pp.27-30
    • /
    • 2004
  • In this work, the variation of the sidewall profile of a thick photoresist on the wavelength and proximity gap was investigated. PMER P-LA900PM, DNQ (DiazoNaphthoQuinone) novolac type photoresist, is used for experiments. The calculated results agreed well with the experimental results.

  • PDF

Very Fine Photoresist Pattern Formation using Double Exposure of Optical Wafer Stepper (Optical Stepper의 이중노광에 의한 미세한 포토레지스트 패턴의 형성)

  • 양전욱;김봉렬;박철순;박형무
    • Journal of the Korean Institute of Telematics and Electronics A
    • /
    • v.31A no.7
    • /
    • pp.69-75
    • /
    • 1994
  • A very fine pattern formation process using double exposure is investigated, which can overcome the resolution limit of optical wafer stepper. The very fine pattern can be obtained by moving the edge profile of large pattern by means of moving the stepper stage. The simulation results show that the light transmittance decrease bellow 9%, and the contrast increase to 16.6% for the 0.3$\mu$m photoresist pattern exposeed by the double exposure using i-line wafer stepper. And the experimental results show that fine photoresist pattern as short as 0.2$\mu$m can be obtained without a loss of photoresist thickness. Also, it proves that the depth of focus for 0.3$\mu$m pattern is longer than $1.5\mu$m. And, the very fine negative photoresist pattern was formmed by using the double exposure technique and the image reversal process.

  • PDF

Modeling and Simulation of Electron-beam Lithography Process for Nano-pattern Designs using ZEP520 Photoresist (ZEP520 포토리지스트를 이용한 나노 패턴 형성을 위한 전자빔 리소그래피 공정 모델링 및 시뮬레이션)

  • Son, Myung-Sik
    • Journal of the Semiconductor & Display Technology
    • /
    • v.6 no.3
    • /
    • pp.25-33
    • /
    • 2007
  • A computationally efficient and accurate Monte Carlo (MC) simulator of electron beam lithography process, which is named SCNU-EBL, has been developed for semiconductor nanometer pattern design and fabrication. The simulator is composed of a MC simulation model of electron trajectory into solid targets, an Gaussian-beam exposure simulation model, and a development simulation model of photoresist using a string model. Especially for the trajectories of incident electrons into the solid targets, the inner-shell electron scattering of an target atom and its discrete energy loss with an incident electron is efficiently modeled for multi-layer resists and heterogeneous multi-layer targets. The simulator was newly applied to the development profile simulation of ZEP520 positive photoresist for NGL(Next-Generation Lithography). The simulation of ZEP520 for electron-beam nanolithography gave a reasonable agreement with the SEM experiments of ZEP520 photoresist.

  • PDF

A Study on thin relief phase holographic grating using photoresist. (Photoresist을 이용한 Thin relief 위상형 홀로그램 격자에 관한 연구.)

  • Shin, K.Y.;Choi, D.H.;Kim, N.;Park, H.K.
    • Proceedings of the KIEE Conference
    • /
    • 1987.07a
    • /
    • pp.47-50
    • /
    • 1987
  • There are various holographic recording materials, such as Dichromated Gelatin, Silver Halide, Thermoplastic, Photoresist. In this paper especially, we used Photoresist to make the phase holographic grating. Deep-groove diffractive grating formed in relatively thin holographic recording material is to express high diffraction efficiency. Phase holographic grating recorded In photoresist can be used very practical because it has the high diffraction efficiency, and it is possible to make a replication easily. So, it has the merit in recording the optical holographic grating than any other materials.

  • PDF

Technology Trends for Photoresist and Research on Photo Acid Generator for Chemical Amplified Photoresist (포토 레지스트의 기술 동향과 화학 증폭형 포토레지스트에서의 광산 발생제의 연구)

  • Kim, Sung-Hoon;Kim, Sang-Tae
    • Journal of the Chosun Natural Science
    • /
    • v.2 no.4
    • /
    • pp.252-264
    • /
    • 2009
  • Lithographic data obtained from PHS(polyhydroxy styrene) having various functionalities were investigated by using a photoacid generator based on diazo and onium type. Chemically amplified photoresist based on the KrF type photoresist was developed by using a photoacid generator and multi-functional resin. Thermal stability for the photoacid generator showed that the increase of loading amount of photoacid generator resulted in the decrease of glass transintion temperature (Tg). The photoacid generators having methyl, ethyl, or propyl group in their cationic structure produced T-top structure in pattern profile due to the effect of acid diffusion during the generation of acid in the resist. The increase of carbon chain length in the anionic structure of photoacid generators resulted in lower pattern resolution due to the interruption of acid diffusion.

  • PDF