• Journal of the Korean Solar Energy Society
• /
• v.32 no.6
• /
• pp.29-36
• /
• 2012

The existing solar tracking sensor for 2 axial control system to trace latitude and longitude is made of four phototransistor. The phototransistor-making is difficult and it's manufacturing is more high-priced than a wide use phototransistor because they have to the same characteristics of each phototransistor output signal. This paper described the algorithm for supplement these weakness. The algorithm applied to signal normalizing method and vector decomposition law. The deviations of each a wide use phototransistor output signal are resolved by signal normalizing method and it is able to make a solar tracking sensor using three phototransistor by vector decomposition law. Therefore, in this paper, it is reduced the number of phototransistor that is composed of solar tracking sensor and possible to use a wide use phototransistor by the proposed algorithm.

• Proceedings of the KIEE Conference
• /
• 2007.11a
• /
• pp.79-80
• /
• 2007

A high performance organic phototransistor with dynamic range of 120 dB is demonstrated by employing soluble pentacene as a photo-sensing layer. The organic phototransistor used suspended source/drain (SSD) electrode structure, which provides a dark current level of ${\sim}10^{-14}$ A at positive gate bias. Under a steady-state illumination, the organic phototransistor exhibited a current modulation of $10^6$ compared to dark to give a dynamic range of 120 dB. These results suggest that the organic phototransistor based on TIPS pentacene can be a new premising candidate for low-cost and high-performance photo-sensing element for digital imaging applications.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08b
• /
• pp.1745-1748
• /
• 2007

First, thin-film photodevices are evaluated, and a p/i/n thin-film phototransistor (TFPT) is recommended because the photo-induced current is relatively high and independent of the applied voltage. Next, an artificial retina is developed using the p/i/n TFPTs, and it is found that it can detect photo illuminance profile with sensitivity control.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.8 s.227
• /
• pp.1159-1165
• /
• 2004

This paper describes fabrication of a micro cell counter integrated with an oxygen micropump and counting experiment with Sephadex G-25 beads ($70{\sim}100\;{\mu}m$). The pumping part consisted of a microheater, catalyst (manganese dioxide) enveloped with paraffin, hydrogen peroxide, and microchannel, and the counting part consisted of collimated light, a microwindow, and a phototransistor including an external circuit. The micropump generated oxygen gas by decomposing hydrogen peroxide with manganese dioxide, which was initiated by melting the paraffin with the microheater, and pumped beads in the microchannel. When the beads passed the microwindow, they shaded the collimated light and changed the illumination on the phototransistor, which caused the current variation in the circuit. The signals, according to the bead size, reached up to 22 mV with noise level of 2 mV during 50 seconds and the numbers of peaks were analyzed by magnitude.

• Journal of IKEEE
• /
• v.22 no.4
• /
• pp.922-932
• /
• 2018

Radial distance sensors are widely used for surveying and autonomous navigation. It is necessary to train the operation principle of these sensors and how to apply them. Although commercialization of radial distance sensor continues to be cost-effective through lower performance, but it is still expensive for educational purposes. In this paper, we propose a distance sensor module with object tracking using radial array of low cost phototransistor which can be used for educational robot. The proposed method is able to detect the position of a fast moving object immediately by arranging the phototransistor in the range of 180 degrees and improve the sensing angle range and track the object by the sensor rotation using the servo motor. The scan speed of the proposed sensor is 50~200 times faster than the commercial distance sensor, thus it can be applied to a high performance educational mobile robot with 1ms control loop.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.9
• /
• pp.1290-1296
• /
• 2013

The light intensity which represents the relative amount of brightness and darkness is very important feature to discern the color hue and its relevant information. With this aim, we devise a new optical system and method to analyze the light intensity. Our suggested system including a phototransistor and white-high-brightness chip light-emitting diode intend estimate the contrast value utilizing Image Research Institute(I.R.I.) Hue & Tone samples which includes 120 color sheets arranged by the color hue and tone. As a result, we confirmed that the brightness of the color checker can be accurately estimated by a high-brightness light-emitting-diode optical system.

• Korean Journal of Optics and Photonics
• /
• v.4 no.3
• /
• pp.294-300
• /
• 1993

Monolithic NOR and INVERTER active optical logic devices inte- grated with surface-emitting microlasers, heterojunction photo- transistors(HPT) in parallel and resistors in series are characterized. The differential quantum efficiency of the typical AlGaAs superlattice microlaser integrated in the active optical logic devices is 15%. Current gain of the HPT is 57, when emitter-collector voltage and input optical power are 4 V and $50{\mu}W$, respectively. $57{\mu}W$ of output power from the active optical logic device decreases to zero when $47{\mu}W$ of input optical power is incident on the HPT part of the active logic device.

• Journal of Korean Association for Spatial Structures
• /
• v.10 no.4
• /
• pp.85-92
• /
• 2010

Use of concrete has undoubtedly become widespread in construction and civil engineering. Sensors are used to add functional characteristics to concrete. Self-diagnosis concrete is also being developed. The thermal protector used in the study is a sensor using the linear expansion and cubical expansion of metal. The LED(Light Emitting Diode) is a phototransistor type, and to secure high-sensitivity light, the prices of these sensors are low. Rising temperatures of concrete elements can be predicted from LED of the external virtual beam due to operation of thermal protector sensors of concrete beam caused by fire load on the concrete specimen. In this study, the development of fire-diagnosis concrete using composite sensors are the fundamental study for damage detection using simply measurements.

• 한국정보교육학회:학술대회논문집
• /
• 2004.08a
• /
• pp.206-215
• /
• 2004

본 연구는 포토트랜지스터를 중심으로 로보틱스를 활용하여 데이터를 보다 면밀하게 측정 분석할 수 있는 시스템을 구축함과 동시에 학생들로 하여금 프로그래밍의 기초를 이해할 수 있도록 하는 것을 목적으로 한다. 본 연구에서는 빛의 양을 측정하여 명령을 수행할 수 있는 로보틱스를 개발하여 측정한 정량화 된 데이터가 가지게 되는 규칙을 학생들이 발견할 수 있는 방안을 모색해 보게 될 것이다. 본 연구의 수행을 위해 basic stamp 2 칩과 포토트랜지스터 센서를 활용하고, PBASIC으로 프로그래밍을 수행할 것이며 이러한 것들로 이루어진 로봇을 활용한 코스웨어를 개발하여 학생들이 변경 가능한 Open Contents system을 고안하여 프로그래밍 교육이 가능하도록 하였다

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.26 no.9
• /
• pp.434-440
• /
• 2014

Experiments were performed to verify if performance and characteristic curves obtained from the temperature differential defrosting method, where surface temperature is measured to judge defrosting condition, can be reproduced by the photoelectric technology where defrosting condition is judged by photoelectric sensors. The output voltage of a phototransistor and heating capacity, power consumption, and surface temperature of the outdoor heat exchanger are compared. The results showed that the photoelectric sensors can be used as a defrost control device. On-off control timings in temperature differential defrosting method are in good agreement with those predicted by the high and low threshold output voltages of the photoelectric sensor.