• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.11a
• /
• pp.346-350
• /
• 1996

In optical disk drives, one of commonly used pickup actuator is a Sliding and rotary type of pickup actuator which is cheaper than other pickup actuators and has simple assembly. However, it reported that non-linearity due to friction between a shaft and a sleeve had to be considerably analyzed in design and servo system in employing this type of pickup actuator. In this paper, this friction is modeled as a Coulomb's friction and the effect of friction is examined in the simulation. A digital servo system is applied to pickup actuator with friction in order to have good focusing servo. To enhance focusing servo performance using digital servo merit, frist PD-controller is applied to have fast response performance, second lead-lag compensator is applied to have stable focusing performance.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.11b
• /
• pp.967-971
• /
• 2001

The frequency characteristics of the optical pickup are investigated indirectly from the bode diagram of the open loop system and the actuator. However, there is necessity of acquiring the optical pickup bode diagram in a view of the differences in the frequency characteristics. One of the differences is that bode diagrams of the optical pickup are differ to that of the actuator and the other is that bode diagrams of the open loop system include controller, gains and filters. So this paper presents the method acquiring the optical pickup bode diagram. In addition, usefulness of the optical pickup bode diagram was demonstrated by being applied to the optical pickup design. The reason of reducing the development period and acquiring the frequency characteristics of the optical system, the optical pickup bode diagram has many merits in the optical pickup design before acquiring the stable bode diagram of the open loop system.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.9
• /
• pp.41-50
• /
• 2002

Optical disk system aiming at fast data transfer rate and high-density recording requires the improvement in performance of the pickup head. Especially, the pickup actuator needs better linearity and stability. So, a lever actuator for optical disk is proposed. In this paper, the role of lever and its structure are discussed and the flexure hinge is introduced to enhance the precise movement. Using the Newoton's method, the motion of equation for the lever actuator is obtained. The results are compared with the analysis results by the FEM (Finite Element Method) for the vibration and the magnetic field. Consequently, the lever actuator has the 2"d system characteristics in 3-axis moving directions and superior stability for the external vibration.tion.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.12
• /
• pp.109-119
• /
• 2002

In this paper, mechanism design of optical pickup actuator for fast access is proposed. This actuator is composed of moving magnet type actuator and moving coil type actuator for tracking and fine motion, respectively. Moving magnet type tracking actuator is configurated by two permanent magnets and four air-core solenoids. Additional damper by induced current in tracking actuator can reduce the transient vibration between the coarse seeking servo and fine seeking servo. Variable stiffness can be acquired by applying current to air-core solenoid simply. This actuator can achieve fast access by these additional damper and stiffness. Performance of this actuator is predicted through the FEM, simulation and simple experiment. Settling time for transient vibration is reduced to 14.7% according to simulation result.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.51 no.5
• /
• pp.234-241
• /
• 2002

An optical pickup actuator is an objective-lens-moving mechanism that provides a means to follow the disk displacement accurately(1). In this paper, a slim type optical pickup actuator for Notebook PCs is analyzed and designed to improve the driving sensitivity A three dimensional equivalent magnetic circuit network method (3D-EMCN method) is proposed for an analysis method which provides better characteristics in both precision and computation time of analysis comparing with a commercial three-dimensional finite element (3D-FEM) codes. To verify the validity of proposed method, we made a comparison between the analysis results and the experimental ones. We also compared this analysis results with 3D-FEM results. Among the several optimal algorithm, we adopt a niching genetic algorithm, which renders a set of the multiple optimal solutions. RCS (Restricted Competition Selection) niching genetic algorithm is used for optimal design of the actuator's performance. Recently, the pickup actuator needs additional driving structure for radial and tangential tilting motion to obtain better pick-up performance. So we applied the proposed method to the model containing tilting coils.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11a
• /
• pp.358.2-358
• /
• 2002

To improve the driving sensitivity of an optical pickup actuator for high density and high speed drive, we present a new actuator design using multipolar flux-density distribution by magnetic materials and Nd-Fe-B sintered magnets. We expect this actuator to use in 3-axis actuator fur tilt compensation as well as conventional 2-axis actuator. The electromagnetic field analysis applying 3-D FEM was performed and several samples were actually tested. From comparing simulated data with experimental results, we verified theaccuracy of the simulation and the superiority of the presented method.

• Journal of Mechanical Science and Technology
• /
• v.17 no.11
• /
• pp.1616-1627
• /
• 2003

This paper describes a mini linear optical pickup actuator. To reduce the size, inner yokes are designed to guide the mover and outer yokes of permanent magnets are removed. Magnetic circuit method is used to determine the thrust force. Virtual path method is proposed to analyze the open magnetic circuit analysis. The magnetic circuit of the proposed actuator can be a closed circuit due to the virtual path model of the outer magnetic flux. The validity of virtual path method is evaluated by comparing to the FEM analysis. Structural vibration is investigated using FEM and the design of the mover is modified to improve the vibration characteristic. Dynamic characteristic experiments shows that the performance of the proposed actuator is enough to be used as a coarse and fine seeking actuator simultaneously and the thrust force margin for loading a focusing actuator is guaranteed.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11b
• /
• pp.565-569
• /
• 2002

To improve the driving sensitivity of an optical pickup actuator for high density and high speed drive, we present a new actuator design using multipolar flux-density distribution by magnetic materials and Nd-Fe-B sintered magnets. We expect this actuator to use in 3-axis actuator for tilt compensation as well as conventional 2-axis actuator. The electromagnetic field analysis applying 3-D FEM was performed and several samples were actually tested. From comparing simulated data with experimental results, we verified the accuracy of the simulation and the superiority of the presented method.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.04a
• /
• pp.635-639
• /
• 1997

In order to design a system a process or plant must be put into a mathematical form for analysis and evaluation, and an appropriate controller must be designed to attain the desired system response. In this paper, the mathematical model for an optical pickup actuator is proposed and an H .inf. controller is employed to obtain the optimal focusing/tracking servo system behavior. Simulation and experiments are carried out to verify the performance of the proposed model.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.05a
• /
• pp.368-372
• /
• 2002

Since rolling (Radial AC Tilt) motion in Optical Pickup Actuator causes RF signal degradation, many researches have been done to find out how to reduce rolling degree. This paper aims to introduce two methods of reducing rolling degree with their theoretical concepts and experimental results. First method rearranges magnetic circuit and the other one adjusts the proportion of the distances among mass center, actuating center and supporting center.