• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.3
• /
• pp.712-717
• /
• 2013

In this paper, we propose a performance-enhanced object recognition by using nonlinear 3D correlator based on pixel restoration. In the proposed method, elemental images of the 3D target that are partially occluded by a foreground object are picked up and transformed into sub-images. By using the block-matching algorithm, the occluded target regions of each sub-image are estimated and removed. After that, the missing pixels in each sub-image are reestablished by using the pixel-restoration method. Finally, through the nonlinear cross-correlations between the reconstructed reference and the target plane images, the improved object recognition can be performed. To show the feasibility of the proposed method, some preliminary experiments are carried out and results are presented by comparing the conventional method.

• Korean Journal of Digital Imaging in Medicine
• /
• v.10 no.1
• /
• pp.41-44
• /
• 2008

This paper will improve the quality of medical imaging to restore defective pixels on how to present the information you want to increase the efficiency, Using the filter is damaged pixel approximation of the same value to get value, but it is difficult to obtaion. How to get value for the restoration of the original imaged as a way to fill a sweater pattern of missing and how to restore the delta using the filter, compared to the extsting method of excellence.

• ETRI Journal
• /
• v.28 no.1
• /
• pp.51-58
• /
• 2006

In this paper, we propose a method of applying a lifting-based wavelet domain e-median filter (LBWDEMF) for image restoration. LBWDEMF helps in reducing the number of computations. An e-median filter is a type of modified median filter that processes each pixel of the output of a standard median filter in a binary manner, keeping the output of the median filter unchanged or replacing it with the original pixel value. Binary decision-making is controlled by comparing the absolute difference of the median filter output and the original image to a preset threshold. In addition, the advantage of LBWDEMF is that probabilities of encountering root images are spread over sub-band images, and therefore the e-median filter is unlikely to encounter root images at an early stage of iterations and generates a better result as iteration increases. The proposed method transforms an image into the wavelet domain using lifting-based wavelet filters, then applies an e-median filter in the wavelet domain, transforms the result into the spatial domain, and finally goes through one spatial domain e-median filter to produce the final restored image. Moreover, in order to validate the effectiveness of the proposed method we compare the result obtained using the proposed method to those using a spatial domain median filter (SDMF), spatial domain e-median filter (SDEMF), and wavelet thresholding method. Experimental results show that the proposed method is superior to SDMF, SDEMF, and wavelet thresholding in terms of image restoration.

• Korean Journal of Remote Sensing
• /
• v.38 no.1
• /
• pp.33-43
• /
• 2022

This study presents a method to restore an optical satellite image with distortion and occlusion due to fog, haze, and clouds to one that minimizes degradation factors by referring to the same type of peripheral image. Specifically, the time and cost of re-photographing were reduced by partially occluding a region. To maintain the original image's pixel value as much as possible and to maintain restored and unrestored area continuity, a simulation restoration technique modified with the Cycle Generative Adversarial Network (CycleGAN) method was developed. The accuracy of the simulated image was analyzed by comparing CycleGAN and histogram matching, as well as the pixel value distribution, with the original image. The results show that for Site 1 (out of three sites), the root mean square error and R² of CycleGAN were 169.36 and 0.9917, respectively, showing lower errors than those for histogram matching (170.43 and 0.9896, respectively). Further, comparison of the mean and standard deviation values of images simulated by CycleGAN and histogram matching with the ground truth pixel values confirmed the CycleGAN methodology as being closer to the ground truth value. Even for the histogram distribution of the simulated images, CycleGAN was closer to the ground truth than histogram matching.

• Journal of information and communication convergence engineering
• /
• v.9 no.3
• /
• pp.331-335
• /
• 2011

Digital images are often corrupted by impulse noise, and it is very important to remove random-valued impulse noise. Cleaning such noise is far more difficult than cleaning salt and pepper impulse noise. In this paper, we proposed an efficient way to remove random-valued impulse noise from digital images. This novel method comprises two stages. The first stage is to detect the random-valued impulse noise in the image and the pixels are roughly divided into two classes, which are "noise-free pixel" and "noise pixel". Then, the second stage is to eliminate the random-valued impulse noise from the image. In this stage, only the "noise pixels" are processed. The "noise-free pixels" are copied directly to the output image. Simulation results indicated that our method provides a significant improvement over many other existing algorithms.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 1999.06a
• /
• pp.29-34
• /
• 1999

We present a practical method for removing biotches and restoring their mission data. To detect blotches, we employ a robust approach of local analysis of spatiotemporal anisotropic brightness continuity Our approach uses first-order spatiotemporal directional derivatives to select the smoothest direction for each examined pixel, and puts out the incorruption probability that he examined pixel may not be corrupted by blotches. As the restoration filter, were employ a spatiotemporal fuzzy filter whose response is adaptively controlled according to a fuzzy rule defined by the incorruption probability. The fuzzy filter is composed of the two different filter of the identity filter and the spatiotemporal directional-weighted-mean filter, and will put out an intermediate value between the original input brightness and the directional-weighted-mean brightness. We design the fuzzy rule in advance by a standard supervised learning fuzzy rule in advance by a standard supervised learning method. The computer simulations are presented.

• Korean Journal of Remote Sensing
• /
• v.33 no.6_1
• /
• pp.1003-1017
• /
• 2017

Multispectral image data of high spatial resolution is required to obtain correct information on the ground surface. The multispectral image data has lower resolution compared to panchromatic data. PAN-sharpening fusion technique produces the multispectral data with higher resolution of panchromatic image. Recently the object-based approach is more applied to the high spatial resolution data than the conventional pixel-based one. For the object-based image analysis, it is necessary to perform image segmentation that produces the objects of pixel group. Image segmentation can be effectively achieved by the process merging step-by-step two neighboring regions in RAG (Regional Adjacency Graph). In the satellite remote sensing, the operational environment of the satellite sensor causes image degradation during the image acquisition. This degradation increases variation of pixel values in same area, and results in deteriorating the accuracy of image segmentation. An iterative approach that reduces the difference of pixel values in two neighboring pixels of same area is employed to alleviate variation of pixel values in same area. The size of segmented regions is associated with the quality of image segmentation and is decided by a stopping rue in the merging process. In this study, the image restoration and segmentation was quantitatively evaluated using simulation data and was also applied to the three PAN-sharpened multispectral images of high resolution: Dubaisat-2 data of 1m panchromatic resolution from LA, USA and KOMPSAT3 data of 0.7m panchromatic resolution from Daejeon and Chungcheongnam-do in the Korean peninsula. The experimental results imply that the proposed method can improve analytical accuracy in the application of remote sensing high resolution PAN-sharpened multispectral imagery.

• Journal of Information Technology Services
• /
• v.22 no.5
• /
• pp.87-98
• /
• 2023

Traditionally, tooth restoration has been carried out by replicating teeth using plaster-based materials. However, recent technological advances have simplified the production process through the introduction of computer-aided design(CAD) systems. Nevertheless, dental restoration varies among individuals, and the skill level of dental technicians significantly influences the accuracy of the manufacturing process. To address this challenge, this paper proposes an approach to designing personalized tooth restorations using Generative Adversarial Network(GAN), a widely adopted technique in computer vision. The primary objective of this model is to create customized dental prosthesis for each patient by utilizing 3D data of the specific teeth to be treated and their corresponding opposite tooth. To achieve this, the 3D dental data is converted into a depth map format and used as input data for the GAN model. The proposed model leverages the network architecture of Pixel2Style2Pixel, which has demonstrated superior performance compared to existing models for image conversion and dental prosthesis generation. Furthermore, this approach holds promising potential for future advancements in dental and implant production.

• The Journal of the Convergence on Culture Technology
• /
• v.4 no.3
• /
• pp.241-246
• /
• 2018

Because of the mechanical problems of input camera equipment, image restoration process is performed in order to minimize recognition errors due to the noise problem generated in test data image. The image restoration method resolves the noise problem by examining the numbers and positions of the Direct neighbors and the Indirect neighbors for each pixel constituting the test data. As a result, satisfactory recognition result can be obtained by eliminating the noise problem generated in the test data through the image restoration process as much as possible and also by calculating the differences between the learning data and the test data in the area unit, thereby reducing the possibility of recognition error by the noise problem.

• Journal of information and communication convergence engineering
• /
• v.9 no.3
• /
• pp.336-340
• /
• 2011

Many approaches to image restoration are aimed at removing either gauss or impulse noise. This is because both types of degradation processes are distinct in nature, and hence they are easier to manage when considered separately. Nevertheless, it is possible to find them operating on the same image, which produces a hard damage. This happens when an image, already contaminated by Gaussian noise in the image acquisition procedure, undergoes impulsive corruption during its digital transmission. Here we proposed an algorithm first judge the type of the noise according to the difference values of pixel's neighborhood region and impulse noise's characteristic. Then removes the gauss noise by modified weighted mean filter and removes the impulse noise by modified nonlinear filter. The result of computer simulation on test images indicates that the proposed method is superior to traditional filtering algorithms. The proposed method can not only remove mixed noise effectively, but also preserve image details.