• Journal of the Korean Statistical Society
• /
• 제7권2호
• /
• pp.109-119
• /
• 1978

When a response surface by a seconde order polynomial regression model, the stationary point is obtained by solving simultaneous linear equations. But the point is a function of random variables. We can find a confidence region for this point as Box and Hunter provided. However, the confidence region is often too large to be useful for the experiments, and it is necessary to augment additional design points in order to obtain a satisfactory confidence region for the stationary point. In this note, the author suggests a method how to augment design points "eficiently", and shows the change of the confidence region of the estimated stationary point in a response surface.e surface.

• 한국의학물리학회지:의학물리
• /
• 제28권3호
• /
• pp.111-121
• /
• 2017

Verification of dose distribution is an essential part of ensuring the treatment planning system's (TPS) calculated dose will achieve the desired outcome in radiation therapy. Each measurement have uncertainty associated with it. It is desirable to reduce the measurement uncertainty. A best approach is to reduce the uncertainty associated with each step of the process to keep the total uncertainty under acceptable limits. Point dose patient specific quality assurance (QA) is recommended by American Association of Medical Physicists (AAPM) and European Society for Radiotherapy and Oncology (ESTRO) for all the complex radiation therapy treatment techniques. Relative and absolute point dose measurement methods are used to verify the TPS computed dose. Relative and absolute point dose measurement techniques have a number of steps to measure the point dose which includes chamber cross calibration, electrometer reading, chamber calibration coefficient, beam quality correction factor, reference conditions, influences quantities, machine stability, nominal calibration factor (for relative method) and absolute dose calibration of machine. Keeping these parameters in mind, the estimated relative percentage uncertainty associated with the absolute point dose measurement is 2.1% (k=1). On the other hand, the relative percentage uncertainty associated with the relative point dose verification method is estimated to 1.0% (k=1). To compare both point dose measurement methods, 13 head and neck (H&N) IMRT patients were selected. A point dose for each patient was measured with both methods. The average percentage difference between TPS computed dose and measured absolute relative point dose was 1.4% and 1% respectively. The results of this comparative study show that while choosing the relative or absolute point dose measurement technique, both techniques can produce similar results for H&N IMRT treatment plans. There is no statistically significant difference between both point dose verification methods based upon the t-test for comparing two means.

• 한국의류산업학회지
• /
• 제4권2호
• /
• pp.145-155
• /
• 2002

In order to investigate how upper limb motion gives influence on clothing, this study measured tests by following standards: Front Vertical motion, Side-Vertical motion, and Horizontal motion. For this study, the procedures in the order of alphabet are applied. A. Eeach of testee's pattern was copied by the motion with a method of tight fitting technique. B. Analyzing each of the size-change on measuring item. C. Studying the moving aspects at each datum points. The results shows that the biggest change can be found in the following items. 1) In vertical motion of F4 (the length to shoulder point from A-point) 2) In horizontal motion of F5 (the length to front-width point from A-point), the check-result gained by checking the notice between motions shows that the most noticeable items are F4 (the length to shoulder point from A-point), F5 (the length to front-width point from A-point), F6 (the length to armpit point from A-point), B7 (the length to side-waist point from B-point). In result of the study of datum point's movement by motion, the items which were measured with the longest on straight-distance in vertical motion are the front and rear-shoulder, and the rear-shoulder, front-armpit in horizontal motion each. In the movement of each datum points by length, the check-result gained by checking the notice between motions shows that the most remarkable item is the front-shoulder.

• 대한조선학회논문집
• /
• 제59권5호
• /
• pp.330-337
• /
• 2022

Research on object detection algorithms using 2D data has already progressed to the level of commercialization and is being applied to various manufacturing industries. Object detection technology using 2D data has an effective advantage, there are technical limitations to accurate data generation and analysis. Since 2D data is two-axis data without a sense of depth, ambiguity arises when approached from a practical point of view. Advanced countries such as the United States are leading 3D data collection and research using 3D laser scanners. Existing processing and detection algorithms such as ICP and RANSAC show high accuracy, but are used as a processing speed problem in the processing of large-scale point cloud data. In this study, PointNet a representative technique for detecting objects using widely used 3D point cloud data is analyzed and described. And RandLA-Net, which overcomes the limitations of PointNet's performance and object prediction accuracy, is described a review of detection technology using point cloud data was conducted.

• 대한치과보철학회지
• /
• 제35권2호
• /
• pp.277-295
• /
• 1997

After clinical adjustment of dental casting restoration, re-polishing procedure is recommanded because the smooth gold sureface is lost. But there is the possibility to get more loose contact than that intended by loss of gold alloy according to the kinds of polishing materials and polishing time. Therefore in this study I polished type II gold alloy with 390gm force, 20,000rpm speed, and 8 kinds of gold alloy polishing materials, fabricated by 4 companies and then measured the amount of loss of gold alloy with Surfcorder SEF-30D and observed alloy surfaces polished by 3 brown rubber points with SEM. The amount of loss of gold alloys polished with 8 kinds of polishing materials and the degree of smoothness of gold alloys according to polishing time and polishing materials were compared. The following results were obtained : 1. When the amount of loss of gold alloys polished with 3 kinds of brown rubber point was compared, Alphalex brown point had the most amount of alloy loss, followed in decreasing order by Shofu brown point and Eveflex brown point. There was statistically significant difference in the amount of alloy loss according to polishing materials. 2. When the amount of loss of gold alloys polished with 5 kinds of green rubber point was compared, Shofu green point had the most amount of alloy loss, followed in decreasing order by Alphaflex green point, Dedeco green clasp polisher, and Eveflex green point. There was statistically significant difference in the amount of alloy loss according to polishing materials except Alphaflex green point and Dedeco green clasp polisher. 3. When the amount of loss of gold alloys polished with all kinds of rubber point was compared, there was no significant difference in Eveflex brown point, Alphaflex green point, and Dedeco green clasp polisher. 4. When average amount of alloy loss per 1 revolution by polishing materials was compared, Alphalex brown point had the greatest value as $0.329{\mu}m$ and Shofu supergreen point had the lowest value as $0.022{\mu}m$. 5. When the degree of sureface smoothness of gold alloy polished with 3 kinds of brown rubber point was compared, In Alphalex brown point surface roughness was completely lost after 20 seconds polishing time, in Shofu brown point 30 seconds, in Eveflex brown point 40 seconds. But in every gold alloys fine scratch formed by rubber points was observed. Based on the results of this study, as rubber polishing materials used in polishing of dental casting restoration after clinical adjustment influenced on the tightness of occlusal or proximal contact, we should make dental casting restoration with minimum error through careful laboratory procedure and form very smooth surface of restoration with tripoli and rouge after use of silicone polishing materials.

• 조명전기설비학회논문지
• /
• 제27권1호
• /
• pp.61-67
• /
• 2013

The turnout point system is installed to separate the main rail track from other tracks in rail load stations. It is also important to set up the switch point system to change the direction of the turnout point, to lead and change the direction of tracks. The switch point system can be negatively affected by heavy snow during winter seasons which can cause critical safety problems. Furthermore, the maintenance and repair of the conventional system is prohibitively expensive due to its complexity and high probability of failure. In this paper, an efficient switch point system is proposed which simplifies the equipment structure and lowers the cost for maintenance and repair, while improving safety and performance of the rail road system.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2005년도 춘계종합학술대회
• /
• pp.705-708
• /
• 2005

본 연구에서는 점대점(point-to-point) 링크상에서 각 스테이션 간의 안테나 빔의 스위트 스폿을 찾고 유지하는 방법을 제안 한다. 제안한 방식은 송수신 데이터에 안테나의 정보를 같이 실어 보내고 그 정보를 이용하여 신경회로망 중에서 간단한 두개의 ADALINE으로 스위트 스폿을 찾고 유지 한다. 통신방식은 시분할 이중화 방식으로 하고, 두개의 ADALINE을 병렬로 연결하여 원하는 목표값에 수렴하고 유지한다. 제안한 방식의 유용성을 점대점(Point-to-Point) 링크상에서 잡음이 없는 경우와 잡음이 첨가된 경우에 대하여 시뮬레이션을 통하여 확인하였다

• 대한수학교육학회지:수학교육학연구
• /
• 제26권4호
• /
• pp.731-754
• /
• 2016

본 연구는 앎의 시점을 밝혀내기 위한 것이다. 앎의 시점이란 '모름'에서 '앎'으로 변화하는 인식의 과정에서 앎이 일어나는 시점을 의미한다. 인식의 과정을 파악하기 위해 초등학교 수학 교과서를 한 차시 단위로 하여 제시되는 질문을 분석하였다. 그 결과 교과서 속에서 앎의 시점을 판단할 수 있는 근거를 찾을 수 있었다. 첫째, 앎의 시점은 학습자가 '모를 것이다'라는 예상에서 '알 것이다'라는 기대로 바뀌게 되는 시점이다. 둘째, 교과서에서 학습자의 실질적 수행을 요구하는 질문에서 파악할 수 있다. 셋째, 차시의 수업 목표와 밀접하게 연결되어 있다. 넷째, 보조인식과 초점인식의 관계에서 초점인식에 해당된다. 다섯째, 개인화/배경화에서 탈개인화/탈배경화로 변곡 되는 시점에 해당된다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 C
• /
• pp.1378-1381
• /
• 1995

Some interesting electrochemical characteristics of waterpen point-to-plate airgaps for dc and ac powers have been investigated at room atmosphere in a metal chamber. It is found that the ac discharge on the Pt point generated much ozone, while the negative do discharge on the waterpen point generated the highest ozone. And, the ac discharges of the waterpen point and the Pt point produced a little $NO_x$. But the dc discharge of the Pt point and waterpen point did not generated $NO_x$ anyway. As a result, it could be said that the water on the pen point acts something to generate ozone and $NO_x$ in room atmosphere.

• 한국정밀공학회지
• /
• 제29권1호
• /
• pp.72-78
• /
• 2012

In this research an equilibrium point of a Wheeled Inverted Pendulum (WIP) running on an inclined road is derived and validated by some experiments. Generally, The WIP has stable and unstable equilibrium point. Only unstable equilibrium point is interested in the research. To keep the WIP on the unstable equilibrium point, the WIP is consistently controlled. A controller for the WIP needs a reference state for the equilibrium point. The reference state can be obtained by studying an equilibrium point of the WIP. This research is deriving dynamic equations of the WIP running on the inclined road and equilibrium of it based on statics. Several experiments are carried out to show the validation of the equilibrium point.