• 제목/요약/키워드: Polyhydroxybutyrate

검색결과 25건 처리시간 0.022초

폴리하드록시부틸레이트 회수를 위한 물리적 세포 파쇄용 돌기형 탄소나노튜브 분리막 제작 (Development of Physical Cell Lysis Using a Spiked CNT Membrane for Polyhydroxybutyrate Recovery)

  • 문지원;백영빈
    • 멤브레인
    • /
    • 제33권6호
    • /
    • pp.390-397
    • /
    • 2023
  • 석유기반 플라스틱의 대체제인 폴리하드록시부틸레이트(polyhydroxybutyrate, PHB)의 기존 추출방법은 분자량 감소 및 물성 변형을 일으킨다. 본 연구에서는 기능화 된 탄소나노튜브(carbon nanotube, CNT)를 부착한 돌기형 탄소나노튜브 분리막의 여과를 통해 물리적 파쇄를 발생시켜 미생물 내 축적된 PHB를 추출하고자 하였다. 돌기형 탄소나노튜브 분리막의 물리적 파쇄를 확인하기 위해 대장균 용액으로 여과 실험을 수행하여 불활성화를 관찰하였다. 또한 PHB를 축적한 미생물 용액의 여과를 수행하여 PHB가 추출되었는지 확인하였더니 가장 대표적인 추출방법인 chloroform과 비교하여도 여과로 인한 추출이 4% 높은 성능을 가진 것을 관찰하였다. 본 결과를 통해 친환경적 바이오 플라스틱 회수를 위한 돌기형 탄소나노튜브 분리막의 적용 가능성을 확인하였다.

재조합 대장균에서의 Polyhydroxybutyrate (PHB)의 분자량 조절 (Molecular weight Control of Polyhydroxybutyrate (PHB) in Recombinant Escherichia coli)

  • 심상준;안토니신스키
    • KSBB Journal
    • /
    • 제13권1호
    • /
    • pp.96-100
    • /
    • 1998
  • 두 개의 프로모터 (trc와 Pp)를 Alcaligenes eutrophus에서 유래된 PHA 오페론에 삽입하여 재조합 대장균에서 분자량이 큰 polyhydroxybutyrate (PHB)를 얻고자 하였다. 두 개의 프로모터는 hydroxybutyric CoA와 PHA 중합반응의 유전자 발현을 각각 독립적으로 제어하기 위해 설계된 것이다 새로운 합성오페론을 포함한 플라즈미드는 E. coli DH5 $\alpha$ 에 transformation 되어 PHB 생산에 이용되었다. 본 실험의 가설로서 PHA 합성오페론의 IPTG에 의한 유도가 없을 경우 낮은 pHA synthase의 활성이 고분자 중합반응의 개시제 농도를 줄여주어 결과적으로 높은 연결수의 고분자를 생성할 것이라는 모델을 세웠다. 실제로 IPTG의 공급이 없는 발효실험을 통해 평균분자량이 $2.5{\times}10^7$ 인 거대 고분자를 얻을 수 있었다. PHA 생합성에 관여는 효소의 활성 분석으로 3-hydroxybutyric CoA의 중합을 촉매하는 효소인 PHA synthase의 활성을 가지고 In vivo에서 분자량이 제어됨을 확인하였다.

  • PDF

Antimicrobial polyhydroxybutyrate submicron fiber mat loaded with extract of Hypericum perforatum

  • Beran, Milos;Horna, Ales;Vorisek, Viktor;Berkova, Eliska;Korinkova, Radka;Trousil, Vojtech;Hrubanova, Marketa
    • Journal of Plant Biotechnology
    • /
    • 제49권3호
    • /
    • pp.257-270
    • /
    • 2022
  • The aim of this work was to prepare a new biodegradable polyhydroxybutyrate (PHB) submicron fiber mat loaded with hypericin-rich Hypericum perforatum raw extract by centrifugal spinning technology, an alternative approach to the traditional method of electrospinning to fabricate nanofibers or microfibers from solutions at high speed and low cost. Hypericins in methanol/acetone extract of H. perforatum were determined by UHPLC-MS/MS and HPLC/PDA. Submicron fiber mats composed of pure PHB or PHB enriched with H. perforatum extract were prepared using a pilot plant demonstrator for the centrifugal spinning technology and characterized by SEM. Singlet oxygen production was quantified by the 1,3-diphenylisobenzofuran (DPIBF) method in hexane. The results proved a significant production of singlet oxygen by the prepared submicron fiber mat. We also found a significant antibacterial activity against the bacterial strain Escherichia coli CCM 5417 by a method in accordance with JIS Z 2801/ISO 22196 standards. The H. perforatum extract-enriched PHB submicron fiber mats showed potential for the development of self-cleaning and antimicrobial air filters.

열적-알칼리성 전처리 유무에 따른 폴리하이드록시부티레이트의 고온 혐기성 소화 영향 연구 (Thermophilic Anaerobic Digestion of Polyhydroxybutyrate with and without Thermo-alkaline Pretreatment)

  • 이지현;이준엽
    • 한국환경과학회지
    • /
    • 제33권2호
    • /
    • pp.121-129
    • /
    • 2024
  • The study investigated the effect of thermo-alkaline pretreatment on the solubilization of polyhydroxybutyrate (PHB) and its potential to enhance of thermophilic anaerobic digestion, focusing on biochemical methane potential (BMP) and methane production rate, using two different particle sizes of PHB (1500 ㎛ and 400 ㎛). Thermo-alkaline pretreatment tests were conducted at 90 ℃ for 24 hours with varying NaOH dosages from 0-80% (w/w). BMP tests with untreated PHB exhibited methane production ranging from 150.4~225.4 mL CH4/g COD and 21.5~24.2 mL CH4/g VSS/d, indicating higher methane production for smaller particle sizes of PHB, 400 ㎛. Thermo-alkaline pretreatment tests achieved a 95.3% PHB solubilization efficiency when 400 ㎛ PHB particles were treated with 80% NaOH dosage at 90 ℃ for 24 hours. BMP tests with pretreated PHB showed substantial improvement in thermophilic anaerobic digestion, with an increase of up to 112% in BMP and up to 168% in methane production rate. The results suggest that a combined pretreatment process, including physical (400 ㎛ PHB particles) and thermo-alkaline (90 ℃, 40-80% NaOH dosage, and 24 hours reaction time), is required for high-rate thermophilic anaerobic digestion of PHB with enhanced methane production.

Increased Tolerance to Furfural by Introduction of Polyhydroxybutyrate Synthetic Genes to Escherichia coli

  • Jung, Hye-Rim;Lee, Ju-Hee;Moon, Yu-Mi;Choi, Tae-Rim;Yang, Soo-Yeon;Song, Hun-Suk;Park, Jun Young;Park, Ye Lim;Bhatia, Shashi Kant;Gurav, Ranjit;Ko, Byoung Joon;Yang, Yung-Hun
    • Journal of Microbiology and Biotechnology
    • /
    • 제29권5호
    • /
    • pp.776-784
    • /
    • 2019
  • Polyhydroxybutyrate (PHB), the most well-known polyhydroxyalkanoate, is a bio-based, biodegradable polymer that has the potential to replace petroleum-based plastics. Lignocellulose hydrolysate, a non-edible resource, is a promising substrate for the sustainable, fermentative production of PHB. However, its application is limited by the generation of inhibitors during the pretreatment processes. In this study, we investigated the feasibility of PHB production in E. coli in the presence of inhibitors found in lignocellulose hydrolysates. Our results show that the introduction of PHB synthetic genes (bktB, phaB, and phaC from Ralstonia eutropha H16) improved cell growth in the presence of the inhibitors such as furfural, 4-hydroxybenzaldehyde, and vanillin, suggesting that PHB synthetic genes confer resistance to these inhibitors. In addition, increased PHB production was observed in the presence of furfural as opposed to the absence of furfural, suggesting that this compound could be used to stimulate PHB production. Our findings indicate that PHB production using lignocellulose hydrolysates in recombinant E. coli could be an innovative strategy for cost-effective PHB production, and PHB could be a good target product from lignocellulose hydrolysates, especially glucose.

열-알칼리성 전처리에 따른 폴리하이드록시부티레이트의 혐기성 소화 개선 효과 조사 (Improving Anaerobic Digestion of Polyhydroxybutyrate by Thermal-Alkaline Pretreatment)

  • ;이준엽
    • 한국환경과학회지
    • /
    • 제31권7호
    • /
    • pp.609-616
    • /
    • 2022
  • In this study, the effect of different reaction times for thermal-alkaline pretreatment on the solubilization and biogasification of polyhydroxybutyrate (PHB) were evaluated. Thermal-alkaline pretreatment tests were performed at 73 ℃ and pH 13 at 0-120 h reaction times. The mesophilic anaerobic batch tests were performed with untreated and pretreated PHB samples. The increase in the pretreatment reaction time results in a 52.8-98.8% increase of the abiotic solubilization efficiency of the PHB samples. The reaction time required to achieve solubilization efficiencies of 50%, 90%, and 95% were 10.5, 52.0, and 89.6 h, respectively. The biogasification of the untreated PHB samples achieved a specific methane production rate of 3.6 mL CH4/g VSS/d and require 101.3 d for complete biogasification. The thermal-alkaline pretreatment significantly improved specific methane production rate (10.2-16.0 time increase), lag time (shortened by 76-81%), and time for complete biogasification (shortened by 21-83%) for the biogasification of the PHB samples when compared to those of the untreated PHB samples. The improvement was higher as the reaction time of the thermal-alkaline pretreatment increased. The findings of this study could be used as a valuable reference for the optimization of the biogasification process in the treatment of PHB wastes.

Biosynthesis of polyhydroxybutyrate and poly(3-hydroxybutyrate-co-3-hydroxyvalerate) by bacillus thuringiensis R-510

  • Park, Sang-Kyu;Lee, Kang-Tae;Kim, Young-Baek;Rhee, Young-Ha
    • Journal of Microbiology
    • /
    • 제35권2호
    • /
    • pp.127-133
    • /
    • 1997
  • Biosynthesis of polyhydroxybutyrate and copolymer consisting of 3-hydroxybutyrate and 3-hydroxyvalerate [poly(3HB-co-3HV)] by Bacillus thuringiensis R-510 grown with glucose or with mixtures of glucose and propionate was investigated. n-Alkanoic acids other than propionate were not precursors of 3HV units. The fraction of 3HV unit in the copolymer increased from 0 to 84 mol% of 3HV. Polymer yield decreased as the fraction of propionate was increased but the molecular weight distribution was not affected by the composition of carbon substrate. The minimum melting temperature (around 65.deg.C) of poly (3HB-co-3HV) copolymers was observed for the polymer bearing approximately 35 mol% of 3HV. Polyhydroxyalkanoates production by this organism was not dependent on nutritional limitation, but remarkably influenced by dissolved oxygen concentration in the culture medium. Low level of dissolved oxygen concentration prevented spore formation in the cells and stimulated the synthesis of polyhydroxyalkanoate. The composition of poly (3HB-co-3HV) produced by B. thuringiensis R-510 lyhydroxyalkanoate. The composition of poly(3HB-co-3HV) propduced by B. thuringiensis R-510 varied according to the growth time. However, there was no evidence that polymers isolated from cells were mixtures of immiscible polymers.

  • PDF