• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 추계학술대회 초록집
• /
• pp.114.1-114.1
• /
• 2010

A highly performed Pd-based hydrogen membrane has prepared successfully on a modified porous nickel support. The porous nickel support modified by impregnation method of $Al(NO_3)_3{\cdot}9H_2O$ (Aldrich Co.) over the nickel powder showed a strong resistance to hydrogen embrittlement and thermal stability. Plasma surface modification treatment was introduced as a pre-treatment process instead of conventional HCl wet activation. Ceramic barrier was coated on the external surface of the prepared nickel supports to prevent intermetallic diffusion and to enhance the affinity between the support and membrane. Palladium and copper were deposited at thicknesses of $4\mu}m$ and $0.5{\mu}m$, respectively, on a barrier-coated support by DC sputtering process. The permeation measurement was performed in pure hydrogen at $400^{\circ}C$. The single gas permeation of our membrane was two times higher than that of the previous membrane which do not have ceramic barrier.

• 공업화학
• /
• 제24권4호
• /
• pp.433-437
• /
• 2013

다공질 세라믹 막을 사용하는 플라즈마-촉매 반응기에서 휘발성유기화합물의 분해가 수행되었다. 저압차 촉매 지지체로 사용된 세라믹 막에 광촉매인 산화아연을 담지하여 휘발성유기화합물의 산화 성능을 개선하고자 하였다. 교류 고전압에 의해 구동되는 플라즈마가 다공질 세라믹 막 내에서 전개되면서 휘발성유기화합물의 분해에 이용되는 라디칼, 오존, 이온, 여기상태 분자 등 다양한 활성성분을 생성하게 된다. 반응기에 공급되는 고전압이 증가함에 따라 플라즈마가 점차 방사방향으로 전개되어, 일정 전압을 넘어서면 세라믹지지체 전체적으로 균일한 플라즈마가 생성되었다. 휘발성유기화합물 분해 성능 평가에는 에틸렌이 이용되었다. 전기에너지밀도, 반응기 입구 에틸렌 농도, 촉매 담지 여부, 기체 조성에 따른 에틸렌 분해효율이 조사되었다. 같은 에너지 밀도에서 비교하면 산화아연이 담지된 촉매에서의 에틸렌 분해 효율이 담지되지 않은 경우보다 더 높은 것으로 나타났으며, 기체 조성 변화 실험을 통해 폐가스의 주요 구성성분인 산소와 질소 모두 에틸렌의 분해를 개시하는데 중요한 역할을 함을 알 수 있었다. 일반적인 기상반응과 달리, 플라즈마 반응기에서의 에틸렌 분해 반응은 활성 성분의 양에 의해 지배되므로, 방전 전력이 동일할 경우 에틸렌 농도가 높아질수록 분해효율이 저하되었다.

• 한국세라믹학회지
• /
• 제30권3호
• /
• pp.189-198
• /
• 1993

A new pressurized sol-gel coating technique forming membrane layers inside pores of the porous support by the simple operation has been developed. Crack-free and reproducible nanoparticulate silica membranes supported on the porous $\alpha$-alumina tube are synthesized by pressurized coating at 600kPa for 2hr. The pore radius and N2 gas permiability at the room temperature of silica membrane layers are 8$\AA$ and 7.0$\times$10-7mol/$m^2$.s.Pa, respectively. The mechanism of N2 gas transfer through synthesized membrane layers is the perfect Knudeen flow, and the thermal stability of the silica composite membranes is excellent upto 40$0^{\circ}C$.

• 한국세라믹학회:학술대회논문집
• /
• 한국세라믹학회 2003년도 춘계총회 및 연구발표회 초록집
• /
• pp.157.1-157
• /
• 2003

• 한국수소및신에너지학회논문집
• /
• 제25권4호
• /
• pp.419-424
• /
• 2014

Direct ethanol fuel cell has been fabricated with ceramic membrane. A porous silicon carbide (SiC) membrane having approximately 30% porosity has been applied for a direct ethanol proton exchange membrane (DE-PEM) fuel cell. A horizontal type cell having Pt ($18mg/cm^2$) catalyst layer on both side of the ceramic membrane was used for the demonstration test. The ethanol oxidation based-fuel cell stack showed very high voltage (1.289V) and measurable current level (68mA) even though at room temperature.

• 한국막학회:학술대회논문집
• /
• 한국막학회 2002년도 춘계 총회 및 학술발표회
• /
• pp.3-6
• /
• 2002

No Abstract, See Full-text

• Korean Membrane Journal
• /
• 제6권1호
• /
• pp.10-15
• /
• 2004

We developed a water-selective ceramic composite membrane for use as a dehydration membrane reactor for dimethylether (DME) synthesis from methanol. The membranes were modified on the porous stainless steel support by the sol-gel method accompanied by a suction process. The improved membrane modification process was effective in increasing the vapour permselectivity by removal of defects and pinholes. The optimized alumina/silica composite membrane exhibited a water permeance of 1.14${\times}$10$^{-7}$ mol/$m^2$.sec.Pa and a water/methanol selectivity of 8.4 at permeation temperature of 25$0^{\circ}C$. The catalytic reaction for DME synthesis from methanol using the membrane was performed at 23$0^{\circ}C$, and the reaction conversion was compared with that of the conventional fixed-bed reactor. The reaction conversion of the membrane reactor was much higher than that of the conventional fixed-bed reactor. The reaction conversion of the membrane reactor and the conventional fixed-bed reactor was 82.5 and 68.0%, respectively. This improvement of reaction efficiency can last if the water vapour produced in the reaction zone is removed continuously.

• 한국세라믹학회지
• /
• 제39권12호
• /
• pp.1153-1157
• /
• 2002

입도가 다른 두 가지 고순도 ${\alpha}-Al_2O_3$ 분말을 이용하여 slip casting법과 담금코팅(dip coating)법으로 다공질 알루미나 지지체와 중간층을 각각 제조하였으며, 그 위에 분리막인 산화티탄($Tio_2$)층을 Ti-naphthenate용액으로 screen printing한 후 열분해시켜 형성시킴으로써, 3층 구조의 비대칭성 세라믹 분리막을 제조하였다. 알루미나 지지체의 곡강도, 기공율 및 평균 기공크기는 각각 231 Kg/$cm^2$, 30.26%, 0.19 ${mu}m$였으며, 중간층은 두께가 약 30 ${mu}m$, 평균 기공크기가 0.063 ${mu}m$였다. 또한 최상층 $Tio_2$ 분리막은 그 두께가 약 0.5 ${mu}m$였으며 평균 약 20 nm 정도의 미세 기공들이 매우 균일하게 형성되어 있었다.

• 한국세라믹학회:학술대회논문집
• /
• 한국세라믹학회 2003년도 추계총회 및 연구발표회 초록집
• /
• pp.175.2-175
• /
• 2003

• 한국수소및신에너지학회논문집
• /
• 제21권2호
• /
• pp.117-122
• /
• 2010

BCY($Ba(Ce_{0.9}Y_{0.1})O_{3-\delta}$) oxide, shows high protonic conductivity at high temperatures, and are referred to as hydrogen separation membrane. For high efficiency of hydrogen separation ($H_2$ flux and selectivity) and low fabrication cost, ultimate thin and dense BCY-Ni layer have to be coated on a porous substrate such as $ZrO_2$. Aerosol depostion (AD) process is a novel technique to grow ceramic film with high density and nano-crystal structure at room-temperature, and would be applied to the fabrication process of AD integration ceramic layer effectively. XRD and SEM measurements were conducted in order to analyze the characteristics of BCY-Ni membrane fabricated by AD process.