• Journal of Ocean Engineering and Technology
• /
• v.16 no.1
• /
• pp.22-26
• /
• 2002

In this paper, a finite element method is applied to the numerical calculation of the harbor calmness. The mild stop equation as the basic equation is used. The key of this model is that the bottom friction and boundary absorption are imposed. A numerical result is presented and compared with the results obtained from the other numerical analysis. These results are in very well agreement. This method calculating the calmness can be broadly utilized making the new design of harbor and fishing port in the future.

• Journal of Navigation and Port Research
• /
• v.38 no.6
• /
• pp.673-681
• /
• 2014

Due to the increased demand for safety and security requirements on the port infrastructure, the harbor tranquility is one of the important parameter in the mooring basin of harbor. It relates keenly to berthing/unberthing and cargo handling works but also it is an important indicator to get the minimum water area as the safe refuge. Hupo harbor is a national coastal harbor located in east coast of Korea and a development plan for a new marina near the entrance is being carried out including berth layouts, breakwater extensions, 300m marina berths, dredging and land reclamation works. The new plan will impact on calmness of the existing port. Therefore, it is necessary to analyze in complex the variation of wave height and direction caused by wave refraction, diffraction, shoaling and reflection from the incident waves from outside the harbor. In order to check the calmness inside a harbor, the numerical models are being used currently need fundamental reviews according to the difference of results which depend on their respective features. In this study, hence, it was introduced the validity of numerical models by comparing the computational results with the hydraulic model experiment. The current investigations contribute to the existing development recommendations and provide further solutions for port planning.

• Journal of Navigation and Port Research
• /
• v.34 no.9
• /
• pp.711-718
• /
• 2010

Redevelopment of the domestic small fishing ports is being started in earnest by applying the environmentally friendly technology in order to attract tourists. For the purpose of improving water quality in the harbor, selection of breakwater type might have the priority to secure calmness and stability. Therefore, this study is to determine the hydraulic characteristics of reflective ratio, installation efficiency and stability of the special type of blocks through the hydraulic model experiment. The results were introduced to analyze for the effect of infield construction work through numerical analysis. Gujora, a small fishing port in southern Korea, is affected by the waves of SSE, S, SSW direction and strong tidal currents. The results of applying cylindrical slit block show that stability of the blocks and harbor calmness were secured. Considering that the pass rate of a long period wave is still excellent, the primary objective of wave control and the secondary objective of improving water exchange are satisfied simultaneously.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2014.06a
• /
• pp.255-257
• /
• 2014

The harbor tranquility is indicating the level of calmness in the mooring basin of harbor. It relates keenly to berthing/unberthing and cargo handling works but also it is an important indicator to get the minimum water area as the safe refuge. Therefore, it is necessary to analyze in complex the variation of wave height and direction caused by wave refraction, diffraction, shoaling and reflection from the incident waves from outside the harbor. In order to check the calmness inside a harbor, the numerical models are being used currently need fundamental reviews according to the difference of results which depend on their respective features. In this study, hence, it was introduced the validity of numerical models by comparing the computational results for Hupo harbor.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.18 no.5
• /
• pp.423-430
• /
• 2012

The purpose of Speed limit at sea is to keep harbor calmness, to maintain efficient traffic flow and to prevent maritime accidents. The Korean Regional Maritime Affairs and Port Office(KRMAPO) specified and enforced the ship's speed limits at the 19 harbors around the Korean coasts. However, problems have been raised to the adequacy of speed limits. This paper made a research on the speed limit set standards, analyzed vessel traffic survey and the dilemma on the specified speed limits imposed by KRMAPO. The result of this study has shown an overall average of 48 % violation rate on speed limit with passenger ships and large vessels of more than 5,000 tons having higher violation rate. Average speed was higher than the limit speed in some harbors and deviation of 4.2 to 5.2 knots was investigated. Further, harbors having higher average speed also have higher deviation accident incidence. Therefore, this paper had confirmed that there is a need for institutional review and improvement of Korea's port and fairways speed traffic management.

• Journal of Navigation and Port Research
• /
• v.33 no.10
• /
• pp.703-707
• /
• 2009

In order to evaluate applicability of cylindrical slit type block breakwater to the field water, which was designed from the previous physical model study, it is analyzed the calmness of harbor area by the numerical model experiment. For a small fishery port in southern coast of Korea a SWAN model using the wave action balance equation was formulated. The reflection and transmission coefficients induced by the physical model test were introduced to the numerical model. The model response with cylindrical slit type breakwater was compared with the impermeable breakwater case and the possibility of water quality improvement through the water circulation by the new structure was investigated. For numerical simulation, parameters of deepwater design wave from the prediction report II for overall deepwater design wave by KORDI were used and wind parameters from the 50years return period observed for 37years(1970~2006) were adopted in the numerical model. The response of west breakwater in Mijo port applying the NE and NNE waves, which were dominant in this area, was analyzed. It was found that the transmission characteristic of designed cylindrical slit breakwater was well presented in the numerical model.

• Journal of Navigation and Port Research
• /
• v.34 no.1
• /
• pp.51-57
• /
• 2010

When estimating the calmness in a harbor, it is important that diffraction and reflection of irregular waves should be exactly calculated. The basic equation of the numerical model in this study was used Mild-slope equation, which has the advantage of which non-linearity with great influence for the wave behavior can be considered, and a triangular mesh was generated by using finite element method. So as to verify the nonlinear effects, the results of the numerical model developed in this study are compared with the experimental and numerical results by other researchers. As a result, it is shown that the results in case of considering nonlinear wave are more exact for wave analysis than in case of not considering nonlinear wave. In order to apply this model, wave height distributions in Jumunjin fishery port installed a seawater-exchange breakwater are computed. From the results of this numerical analysis, when abnormal waves are intruded through the seawater-exchange breakwater, the results of the wave height distributions in the harbor are highly presented. Therefore, in order to get wave height low in the harbor, it is considered that the facility with the ability to protect the inflow of abnormal waves is needed.

• Journal of the Korean Geotechnical Society
• /
• v.27 no.12
• /
• pp.85-96
• /
• 2011

A breakwater is a important structure for both calmness of harbor and protection of the port facilities from waves generated from typhoons or wind. This study adopted the rubble mound breakwater, which is one of the most popular type of breakwaters in Korea. Rubble mound breakwater had been designed by considering only static condition previously. Recently, a dynamic wave-load due to waves has been also considered in designing breakwater. In design, the wave-load is assumed as an uniform load which only acts in the front slope of the breakwater. However, the assumption is not applicable in reality. In this study, therefore, a real-time wave-load acting on the breakwater instead of the uniform load is considered, and it is assumed to be acting on the seabed too. Based on the numerical analysis, it is found that there is a significant difference in the maximum settlement compared with the result predicted by the existing design method.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.31 no.6
• /
• pp.468-477
• /
• 2019

The numerical model of Boussinesq approximation, which is mainly used for evaluating the port calmness due to the irregular waves, has a limit of applicability of lattice size in ports such as marinas with narrow port openings of around 30m. The SWASH model controls the partial reflection according to the depth, porosity coefficient and structure size when applying the reflected wave incident on the structure and terrain. In this study, the partial reflection evaluation at the front of the structure according to the bottom shape and the shape of the structure are examined. In order to evaluate the reproducibility of the model due to the diffraction waves entering the term, the area of incidence at right angles and inclination of the structure is constructed and compared with the diffraction theory suggested by Goda et al. (1978). The experimental results of the sectional structure reflectances calculated as the depth mean show reflectances similar to the approximate values of the reflectances presented by Stelling and Ahrens (1981). It is considered that the reflected wave is well reproduced according to the control of the reflected wave at the boundary and the shape and topography of the structure. Compared with previous studies to examine the diffraction of the wave incident from the breakwater opening, the wave incidence angle and the shape of the diffraction wave are very similar to the theoretical values, but both oblique and rectangular incidence In the case where the direction concentration is small, the diffraction degree is underestimated in some sections with the crest ratio of 0.5 to 0.6.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.26 no.6
• /
• pp.397-404
• /
• 2014

In Korea, harbor tranquility is generally estimated by using both methods of investigating harbor calmness under abnormal wave condition and evaluating the harbor serviceability. The efficiency of the former method is questionable as the tranquility of a harbor is judged by a wave height criterion that is arbitrarily determined without rational basis. In case of the latter method, the utilization rate of a harbor is estimated by using the exceedance probability of wave height or the distribution of wave heights and periods that is obtained from longterm measured or hindcasted wave data. Use of long-term data is desirable in order to guarantee the accuracy of the exceedance probability. Meanwhile, the criterion for determining maximum allowable wave height for cargo handling works is too simple and has limitations for being used in an actual field condition. Problems of existing method for estimating harbor tranquility were verified by the wave observation data in Busan New Port. And the importance of the field observation data was emphasized. It is necessary to perform long-term wave monitoring inside and outside of major ports in Korea in order to establish more advanced standard for evaluating harbor tranquility based on such observed wave data.