• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.9 no.1
• /
• pp.84-88
• /
• 1999

The behavior of oxygen precipitation was investigated in radial direction using Si wafers with different vacancy-related defects generation area. The behavior of oxygen precipitation in radial direction is strongly dependent on the size of vacancy rich area which is related with crystal growth condition. Oxygen precipitation rate is more enhanced in vacancy rich area than that of interstitial rich area. And anomalous oxygen precipitation is generated in the marginal bands of vacancy and interstial area. In V/I boundary, however, oxygen precipitation is suppressed to nearly perfect.

• Journal of Power System Engineering
• /
• v.5 no.1
• /
• pp.97-103
• /
• 2001

The present study was investigated changes of precipitation behaviour of laves phase in ferrite single phase and ferrite-martensite dual phase and the mechanical properties of 10%Cr ferritic alloys. In the ferrite phase, laves phase was mainly precipitated, whereas in the martensite phase, carbide was preferentially formed during the initial stage of aging and with increasing aging time. Laves phase and carbide were simultaneously precipitated by precipitation of laves phase at around carbide. Strength and toughness were lowered by the disk-type precipitator in the initial stage of aging and toughness was recovered with increasing of aging time and then, decreasing by precipitation of laves phase.

• Journal of Korea Foundry Society
• /
• v.15 no.2
• /
• pp.194-200
• /
• 1995

Rapidly Solidified (RS) Al-Zr base splats with various alloy contents were prepared by atomization-splat quenching method to understand the continuous and discontinuous precipitation in the aged alloys. And the RS alloys were consolidated by hot extrusion and swaging to analyze the effect of plastic deformation on the precipitation behavior. Discontinuous precipitation dominated at relatively low temperature in the Al-Zr alloy, whereas both V additions to Al-Zr alloys and hot metal working appeared to suppress the discontinuous precipitation. As continuous precipitation is favored in the grain interiors, the driving force for discontinuous precipitation become to disappear with a further process.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.54 no.5
• /
• pp.141-153
• /
• 2012

In this study, we estimated probable precipitation amounts at the target year (2020, 2030, 2040) of 55 weather stations in Korea using the 24 hour annual maximum precipitation data from 1973 through 2009 which should be useful for management of agricultural reservoirs. Not only trend tests but also non-stationary tests were performed and non-stationary frequency analysis were conducted to all of 55 sites. Gumbel distribution was chosen and probability weighted moment method was used to estimate model parameters. The behavior of the mean of extreme precipitation data, scale parameter, and location parameter were analyzed. The probable precipitation amount at the target year was estimated by a non-stationary frequency analysis using the linear regression analysis for the mean of extreme precipitation data, scale parameter, and location parameter. Overall results demonstrated that the probable precipitation amounts using the non-stationary frequency analysis were overestimated. There were large increase of the probable precipitation amounts of middle part of Korea and decrease at several sites in Southern part. The non-stationary frequency analysis using a linear model should be applicable to relatively short projection periods.

• Atmosphere
• /
• v.22 no.1
• /
• pp.57-71
• /
• 2012

Influences of orographic and ocean effect, which depend on the detailed geographic characteristics, upon winter time (December-February) precipitation in the Yeongdong region are investigated. Most of precipitation events in the Yeongdong region during the wintertime are associated with moist northeasterly (coming from the northeast direction) winds and also the spatial distribution of precipitation shows a great difference between Mountain area (Daegwallyeong) and Coastal area (Gangneung). The linear correlation coefficient between the meteorological variables obtained from NCEP/NCAR Reanalysis Data and precipitation amount for each precipitation type is calculated. Mountain type precipitation is dominated by northeasterly wind speed of the low level (1000 hPa and 925 hPa) and characterized with more precipitation in mountain area than coastal area. However, Coastal type precipitation is affected by temperature difference between ocean and atmosphere, and characterized with more precipitation in coastal area than mountain area. The results are summarized as follows; In the case of mountain type precipitation, the correlation coefficient between wind speed at 1000 hPa (925 hPa) and precipitation amount at Daegwallyeong is 0.60 (0.61). The correlation is statistical significant at 1% level. In the case of coastal type precipitation, the correlation coefficient of temperature difference between ocean and 925 hPa (850 hPa) over the East sea area and precipitation amount at Gangneung is 0.33 (0.34). As for the mountain type precipitation, a detailed analysis was conducted in order to verify the relationship between precipitation amount at Daegwallyeong and low level wind speed data from wind profiler in Gangneung and Buoy in the East Sea. The results also show the similar behavior. This result indicates that mountain type precipitation in the Yeongdong region is closely related with easterly wind speed. Thus, the statistical analysis of the few selected meteorological variables can be a good indicator to estimate the precipitation totals in the Yeongdong region in winter time.

• Journal of the Korean Society for Heat Treatment
• /
• v.12 no.1
• /
• pp.21-30
• /
• 1999

The present study were investigated changes of precipitation behaviour of laves phase in ferrite single phase and ferrite-martensite dual phase and precipitation of laves phase under stress. Hardness changes in ferrite phase appeared two hardness peaks by precipitation of initial fine precipitator and laves phase in 3Mo-0.3Si and 3Mo-0.3Si-C specimens, respectively. Hardness changes in martensite phase of 3Mo-0.3Si-C specimen was lower in the initial stage of aging by carbide precipitation and after this, increased by re-hardening due to precipitation of laves phase. In the ferrite phase, laves phase was mainly precipitated, whereas in the martensite phase, carbide was preferentially formed during the initial stage of aging and with increasing aging time, laves phase and carbide were simultaneously precipitated by precipitation of laves phase at around carbide. In the ferrite-martensite interface, laves phase was mainly precipitated and carbide was mainly formed at boundary of lath martensite than grain boundary. Adding the stress in aging, fine precipitator of inital precipitation of laves phase precipitated in (100) of perpendicular to tensile direction and has grown to only followed<010>direction and also, volume fraction of laves phase increased. Consequently, the stress added was accelerated initial precipitation of laves phase.

• Journal of Welding and Joining
• /
• v.26 no.1
• /
• pp.76-82
• /
• 2008

The effect of Nb addition on the precipitation and precipitate coarsening behavior was investigated in Ti and Ti + Nb steel weld HAZ. A dilatometer equipped with a He-quenching system was used to simulate the weld thermal cycle. Compared to $TiC_yN_{1-y}$ precipitate in a Ti containing steel, $Ti_xNb_{1-x}C_yN_{1-y}$ complex particle with addition of Nb is precipitated in a Ti + Nb containing steel. Meanwhile, precipitate coarsening occurred more easily in Ti + Nb steel, which may be because the high temperature stability of $Ti_xNb_{1-x}C_yN_{1-y}$ complex particle is deteriorated by the Nb addition.

• Journal of the Korean Society for Heat Treatment
• /
• v.19 no.5
• /
• pp.257-261
• /
• 2006

Scandium(Sc) in Al-Zn-Mg-Cu based Al alloy on precipitation phenomenon was compared to a 7001(Al-7.2%Zn-3.2%Mg-1.8%Cu) Al alloy. GP zone and ${\eta}^{\prime}$ phases were the main strengthening phases at low aging temperature under $100^{\circ}C$, but ${\eta}^{\prime}$ and $Al_3Sc$ phases were the main strengthening phases at high aging temperature above $1600^{\circ}C$ in Sc added 7000(Al-7.7%Zn-2.0%Mg-1.9%Cu-0.1%Zr) Al alloy. With the addition of 0.1%Sc in 7000 Al alloy, the activation energy for the GP zone, ${\eta}^{\prime}$ and ${\eta}$ phase decreased compared to the 7001 Al alloy. This result indicates that the Sc accelerated the precipitation for the GP zone, ${\eta}^{\prime}$ and ${\eta}$ phases in 7000 Al alloy. Al-7.7%Zn-2.0%Mg-1.9%Cu-0.1%Zr-0.1 Sc alloy has higher strength than 7001 Al alloy, which has high strength.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.8 no.5
• /
• pp.103-109
• /
• 2008

Precipitation on slope is separated into infiltration and outflow according to physical properties of soil and slope. However, the slope analysis is assumed that all precipitation are percolated. So, groundwater level is excessive tend to be calculated. In this paper, NRCS model and Horton models that have a suitability were used for agro-type analysis of Seoul station after precipitation was separated into infiltration and outflow. Also, gradient of slope was analyzed about seepage behavior and underground water level aspect through numerical analysis. After inclination correction, the estimated infiltration was compose of slopes much applied by domestic design standard. The change of groundwater level is appeared greatly as agro-type goes from D type to A type in the analysis results.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2002.05a
• /
• pp.69-72
• /
• 2002

The high temperature deformation behavior of SiCp/2124Al composite and 2124Al alloy was investigated by hot compression test in a temperature ranged $400~475^{\circ}C$ over a strain rate ranged $10^{-3}~1s^{-1}$. The billets of 2124Al alloy and SiCp/2124Al composite were fabricated by vacuum hot pressing process. The stress-strain curve during high temperature deformation exhibited a peak stress, and then the flow stress decreased gradually into a steady state stress with increasing the strain. It was found that the flow-softening behavior was attributed to the dynamic recovery, local dynamic recrystallization and dynamic precipitation during the deformation. The precipitation phases were identified as S' and S by TEM diffraction pattern. Base on the TEM inspection, the relationship between the Z-H parameter and subgrain size was found based on the experiment data. The dependence of flow stress on temperature and strain rate could be formulated well by a hyperbolic-sinusoidal relationship using the Zener-Hollomon parameter.