• Journal of Korea Game Society
• /
• v.21 no.4
• /
• pp.73-84
• /
• 2021

In this paper, we propose an analysis method that categorizes the Core that essential behaviors in game, the Primary that solves the game problem, and the Secondary that helps the Core and the Primary. The proposed method can analyze the genre similarity and characteristics of the game, the richness of the content, and the proficiency level of the game. case study were conducted to confirm whether the analysis items were consistent with the objective game experience. The results of this study are expected to be helpful in improving game design ability.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.16 no.3
• /
• pp.15-20
• /
• 2008

At the choice of aviation company, safety appears as biggest variable than expenses, speed and comfort so these are concerned not only aviation companies but also countries and customers. Until now, ICAO has been making effort to reduce the flight accident through the safety advice of aviation part, establishment of standard, education, training and develop of navigation aids. Especially in 2008, they emphasize that the flight accident is reduced through researches and applications about SMS as safety regulation. Important primary factor to give influence about promotion of SMS is practice of organization and for this, to investigate recognition about safety management and culture of members. At point of this, this research analyze the recognition degree about how to manage safety and SMS for pilots an mechanics of Korea.

• Journal of the Korean association of regional geographers
• /
• v.7 no.4
• /
• pp.81-92
• /
• 2001

Main debates in the modern geographical thoughts had been developed around the regional geography. Because regional geography had been regarded as a raison d'etre of geography, it remains solid status in geography curriculum. But unscientific nature of regional geography was the main problem of modern geography. Modern geography has developed the logical legitimation of regional geography, instead of research procedures. We examine the logic of modern geographical thoughts from 3 worldview. Here we represented the part - the whole relationship as the primary category, and classify these into three type according to the implicit proposition about the relationship. One is the organic view, which assume that the whole is greater than the sum of the parts. This view was the primary proposition held by the modem geographers. This view regarded the region as organic complex, and presume the unit region which is irreducible to the elements. The other is mechanic view, which presuppose that the whole is the sum of the parts. This view comprehend region by means of spatial order, in order to simplify the complex reality. Then we compare real condition with assumption. These two view held static assumption. Now, the third view regarded the part- the whole relationship as being dynamic. Most geographers held the organic view, although someone suggests the idea of harmony, the others suggests the idea of complex. But these view presumes the pre-industrial society in which the genre de vie was main principle of social order. Therefore It could not comprehend the regional concept in the context of the urbanization and industrialization.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.10 no.1
• /
• pp.47-53
• /
• 2011

From recent research, it has revealed that Electroacitve polymer(EAP) has a physical limitation. Carbon nanotube(CNT) is known as the promising material which has excellent electro-mechanical characteristics and is mostly defect-free. It is expected that a successful synthesis of CNT and Nafion known as a primary material for IPMC would make a great improvement on its electro-mechanic feature. In this paper, we suggest the method of synthesis of CNT with Nafion which improves electro-mechanical characteristic. Using mechanical dispersion with Nafion and Isopropyl Alcohol(IPA), we disperse Single-walled carbon nanotubes(SWCNT). For a uniformly layer of CNT, we used a spray gun on a hot plate by a simplified method. In the result, we fabricated a disperse SWCNT/Nafion composite uniformly.

• Proceedings of the KIEE Conference
• /
• 2003.07c
• /
• pp.1529-1531
• /
• 2003

Thick film mechanical sensors can be categorized into four main areas piezoresistive, piezoelectric, piezocapastive and mechanic tube. In this areas, the thick film strain gage is the earliest example of a primary sensing element based on the substrates. The latest thick film sensor is used various pastes that have been specifically developed for pressure sensor application. The screen printing technique has been used to fabricate the pressure sensors on alumina substrate($Al_2O_3$). Thick film capacitive of strain sensing characteristics are reported and dielectric paste based on (Ti+Ba) materials. The electric property of dielectric paste has been studied and exhibit good properly with good gage factor comparable to piezoresistive strain gage. New piezocapacitive strain sensor was designed and tested. The output of capacitive value was good characteristics.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.350-351
• /
• 2006

Thick film mechanical sensors can be categorized into four main areas piezoresistive, piezoelectric, capacitive and mechanic tube. In this areas, the thick film strain gage is the earliest example of a primary sensing element based on the substrates. The latest thick film sensor is used various pastes that have been specifically developed for pressure sensor application. Some elastic materials exhibit a change in bulk resistivity when they are subjected to displacement by an applied pressure. This property is referred to as piezoresistivity and is a major factor influencing the sensitivity of a piezoresistive strain gage. The effect of thick film resistors was first noticed in the early 1970, as described by Holmes in his paper in 1973.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.10 no.5
• /
• pp.131-136
• /
• 2011

Many researchers are recently studying about Electroactive polymer(EAP). But it has a physical limitation, because of property of material. Carbon nanotube(CNT) is known as the promising material which has excellent electro-mechanical characteristics and is mostly defect-free. It is expected that a successful synthesis of CNT and Nafion known as a primary material for IPMC would make a great improvement on its electro-mechanic feature. This study focuses on the method of synthesis of CNT with Nafion which improves electro-mechanical characteristic. To come up with mechanical dispersion with Nafion and Isopropyl Alcohol(IPA), we dispersed Single-walled carbon nanotubes(SWCNTs). For a uniformly layer of CNT, we used a spray gun on a hot plate by a simplified method. We fabricated a disperse SWCNT/Nafion composite uniformly. Through the use of the E-beam evaporator to form an uniform electrode layer, we consummated the IPMC actuator. This result shows improving 1.5 times mechanical properties about driving force in IPMC.

• International Journal of Quality Innovation
• /
• v.8 no.1
• /
• pp.137-153
• /
• 2007

Failure mode and effects analysis (FMEA) is a preventive technique in reliability management field. The successful implementation of FMEA technique can avoid or reduce the probability of system failure and achieve good product quality. The FMEA technique had applied in vest scopes which include aerospace, automatic, electronic, mechanic and service industry. The marking process is one of the back ends testing process that is the final process in semiconductor process. The marking process failure can cause bad final product quality and return although is not a primary process. So, how to improve the quality of marking process is one of important production job for semiconductor testing factory. This research firstly implements FMEA technique in laser marking process improvement on semiconductor testing factory and finds out which subsystem has priority failure risk. Secondly, a CCD position solution for priority failure risk subsystem is provided and evaluated. According analysis result, FMEA and CCD position implementation solution for laser marking process improvement can increase yield rate and reduce production cost. Implementation method of this research can provide semiconductor testing factory for reference in laser marking process improvement.