• 한국정보통신학회논문지
• /
• 제11권11호
• /
• pp.2179-2184
• /
• 2007

본 논문에서는 인간과 환경사이의 물리적 또는 심리적 인터액션을 통한 인간중심의 적절한 서비스를 제공하는 공간지능화(iSpace: Intelligent Space) 구현하고자 네트웍 센서 인식공간을 소개하고 있다. 영상 데이터 처리 및 정보 네트웍 기능을 갖는 다수의 컬러 CCD 카메라를 iSpace 공간에 분산 배치하였다. iSpace내의 정보획득을 위한 네트웍 센서를 분산 지능형 네트웍 디바이스(DIND: Distributed Intelligent Network Devices)라고 명명하고 있으며, 각 DIND는 일종의 클라이언트 역할을 수행하도록 하였으며, DIND는 카메라 센서를 이용하는 이른바 카메라 네트워크를 구성한 것으로 이를 통해 실내 환경을 인식하고 모델링 하며 공간 내 거주자의 의도를 인식하기 위한 시스템을 구축하였다.

• 한국가스학회지
• /
• 제25권5호
• /
• pp.57-62
• /
• 2021

가스는 일반 가정 및 산업현장에서 폭 넓게 사용되는 에너지원이기도 하고, 석유화학 및 반도체 공정에서 넓게 사용되는 공정 물질이기도 하다. 그러나 사용이 쉬운 반면에 누출 시, 폭발 및 인체흡입 등으로 대규모 인명피해를 발생시키기도 한다. 따라서 가정 및 산업현장에서 안심하고 사용할 수 있는 가스 시설물 안전관리 솔루션은 필수적이다. 특히 가스시설의 노후화에 따라 고도화된 가스안전 솔루션의 개발 필요성이 대두되고 있는 실정이다. 본 논문은 가스 시설물에 더 이상 나눌 수 없는 최소 에너지 단위인 광자를 조사하고, 반사된 광자의 수를 분석해 원거리에서 가스 누출 여부 및 농도를 측정하는 기술을 개발하였다. 이는 기존의 전기/화학식 가스 센서나 적외선 기반의 가스 누출 감지기의 한계인 짧은 탐지 거리, 미세 누출 감지 불가 등의 기술적 한계를 극복하였다.

• 품질경영학회지
• /
• 제49권3호
• /
• pp.299-312
• /
• 2021

Purpose: We provide a condition-based maintenance policy where a surrogate variable is used for monitoring system performance. We constructed a risk function by taking into account the risk and losses accompanied with erroneous decisions. Methods: Assuming a unique degradation process for the performance variable and its specific relationship with the surrogate variable, the maintenance policy is determined. A risk function is developed on the basis of producer's and consumer's risks accompanied with each decision. With a strategic safety factor considered, the optimal threshold value for the surrogate variable is determined based on the risk function. Results: The condition-based maintenance is analyzed from the point of risk. With an assumed safety consideration, the optimal threshold value of the surrogate variable is provided for taking a maintenance action. The optimal solution cannot be obtained in a closed form. An illustrative numerical example and solution is provided with a source code of R program. Conclusion: The study can be applied to situation where a sensor signal is issued if the system performance begins to degrade gradually and reaches eventually its functional failure. The study can be extended to the case where two or more performance variables are connected to a same surrogate variable. Also estimation of the distribution parameters and risk coefficients should be further studied.

• 항공우주시스템공학회지
• /
• 제12권6호
• /
• pp.32-40
• /
• 2018

본 연구에서는 error-outlier 기반의 충격위치탐지 알고리즘과 다중화된 FBG 센서를 이용하여 탄소섬유 강화 플라스틱 복합재 평판 구조물에 대한 충격위치탐지를 수행하였다. 알고리즘의 주요 변수인 오차 임계값(ET)이 0.3 nm, 상수 수준(CL)이 110일 때 최적의 충격위치탐지 결과(최대 오차= 31.82 mm, 평균 오차= 6.31 mm)가 도출되었다. 또한 주어진 최적의 변수 조건에서의 충격위치탐지 과정과 결과를 상세히 분석하였다. 본 연구에서 제시된 다중화된 FBG 센서와 error-outlier 기반의 충격탐지 알고리즘은 복합재 구조물에 대한 충격탐지에 적합한 것으로 판단되며, 향후 다양한 구조 건전성 감시에 활용될 것으로 기대된다.

• 한국프랜차이즈경영연구
• /
• 제10권4호
• /
• pp.7-18
• /
• 2019

Purpose: This study identifies the relative importance of the sub - factors of initial services and continuous services using AHP (Analytic Hierarchy Process) method, and calculates the competitive index for the detailed factors. The purpose of this paper is to propose the establishment of long - term and short - term management strategy for expansion of business of food service franchise, franchisors, long - term and win - win relationship with franchisees, and rationalization of operating system. Research design, data, and methodology: The population for the survey is 92 franchisees in 46 foreign brands and 46 domestic brands in the Seoul metropolitan area (Seoul / Gyeonggi / Incheon). The survey was conducted from July 1 to August 31, 2018 through the survey agency with a telephone interview and a surveyor's direct visit. A total of 100 questionnaires were collected, but a total of 92 parts were used for analysis except 8 parts that were considered to contain false information. Using the AHP method, relative importance and competitiveness index were calculated for the details of initial services and continuous services. Results: The results shows continuous services were significantly higher for both foreign brand franchises, domestic brand franchises, and overall than initial services, This suggests that the continuous services of the affiliated franchisors has a higher relative importance than the initial services. Among the continuous services, brand reinforcement and promotion were significantly higher for both foreign brand merchants and domestic brand franchises. This can be regarded as the most important factor in brand reinforcement and promotion when selecting a food service franchisors. Conclusions: In the Standard Terms and Conditions governed by the Fair Trade Commission, the franchisors should increase the fairness by creating manuals for supporting services, especially after opening, and regularly checking whether the supporting services have been carried out like manuals since the establishment of franchisees. In addition, the Brand Strengthening and Public Relations Committee (tentative name) jointly participated by the franchisors and franchisees for the purpose of strengthening and promoting the brand, suggesting a system for transparent and efficient execution of the brand reinforcement and promotion budget and monitoring afterwards.

• 한국컴퓨터정보학회논문지
• /
• 제26권3호
• /
• pp.9-17
• /
• 2021

동적 시스템 환경에서 지능형 협업 자율 시스템을 위한 기계학습 기반의 다양한 방법들이 연구 및 개발되고 있다. 본 연구에서는 분산 노드 기반 컴퓨팅 방식의 자율형 다중 에이전트 경로 탐색 방법을 제안하고 있으며, 지능형 학습을 통한 시스템 최적화를 위해 강화학습 방법을 적용하여 다양한 실험을 진행하였다. 강화학습 기반의 다중 에이전트 시스템은 에이전트의 연속된 행동에 따른 누적 보상을 평가하고 이를 학습하여 정책을 개선하는 지능형 최적화 기계학습 방법이다. 본 연구에서 제안한 방법은 강화학습 기반 다중 에이전트 최적화 경로 탐색 성능을 높이기 위해 학습 초기 경로 탐색 방법을 개선한 최적화 방법을 제안하고 있다. 또한, 분산된 다중 목표를 구성하여 에이전트간 정보 공유를 이용한 학습 최적화를 시도하였으며, 비동기식 에이전트 경로 탐색 기능을 추가하여 실제 분산 환경 시스템에서 일어날 수 있는 다양한 문제점 및 한계점에 대한 솔루션을 제안하고자 한다.

• 대한토목학회논문집
• /
• 제42권4호
• /
• pp.549-557
• /
• 2022

건설 현장, 특히 토목 분야 시공 프로젝트의 경우 다양한 요인에 따라 프로젝트 진척상황을 파악하고 공사/공정을 모니터링 하는데 어려움이 따른다. 본 연구에서는 건설 프로젝트, 특히 토목 시공 프로젝트의 생애주기 중 주요 과정 중 하나인 공사/공정관리 모니터링 단계에서의 무인비행장치의 활용가능성에 대하여 분석하고 그 방법에 대하여 고찰하고자 한다. 먼저, 본 연구에서 도출한 건설 현장의 특징을 극복하기 위하여 공사/공정관리 모니터링 과정에 대하여 먼저 분석을 수행하고, 현재 드론 기기의 특성에 맞는 활용 방법에 대하여 분석을 수행하였다. 이를 바탕으로 하여 토목 현장 관리를 위한 필수 데이터인 정사영상 및 포인트 클라우드 데이터를 취득하기 위한 시스템을 개발하였으며 시스템 적용가능성에 대한 분석을 수행하였다. 대표적인 토목 현장인 도로 프로젝트를 대상으로 테스트베드를 수행하여 무인비행장치의 현장 활용가능성에 대한 검토 역시 진행하였다. 테스트 베드 수행 결과 개발된 시스템의 건설 현장 관리 적용 가능성 및 실용성을 확인할 수 있었다. 향후 연구에서는 무인비행장치를 활용하여 취득하고 분석한 데이터가 실질적으로 시공/공정 관리 정보로서 활용될 수 있도록 기반을 마련될 수 있도록 제도적, 기술적 보완을 위한 연구가 요구된다.

• 인간식물환경학회지
• /
• 제23권3호
• /
• pp.347-362
• /
• 2020

Background and objective: It is difficult to conclusively determine the exact cause of tree defects since multiple causes are involved such as climate change, plantation, tree quality and planting time, construction, planting base, drainage, sunshine conditions, maintenance, and microclimate. The data related to landscaping construction defects are scattered or fragmented by companies and years, but not managed systematically by the defect information management system. Most of the earlier studies associated with tree defects in apartment complexes suggested defect rates after examining tree defects in the completed construction site and proposed fragmentary and subjective conclusions about the causes of defects observed in trees with high defect rates. It is proposed to continue to conduct studies on the establishment and analysis of systematic databases to identify the exact causes of tree defects and measures to improve, and the need to accumulate systematic data in the construction process where many defects arises. This study was conducted to reduce the defects of trees planted in apartment complexes. Methods: Main factors related to tree defects were subdivided based on the results of literature review and a defect investigation at the completion site, and tree history management items were selected and subdivided during the construction stage. Results: The criteria for the preparation of subdivided items were obtained, and the tree history management checklist was written for the site under actual construction and a systematic database was established. Items that are categorized based to the causes of defects include the location of nurseries, date, tree quality, site conditions, planting techniques, microclimates, and maintenance. Conclusion: This study suggested tree history management items based on the tree defects that can be identified at the construction stage and applied them to the selected study site, which differentiates this study from earlier studies. It will be necessary to conduct a comprehensive and objective time series analysis on tree defects that occur over time by continuously monitoring and collecting data after construction.

• Asia Marketing Journal
• /
• 제15권2호
• /
• pp.175-194
• /
• 2013

The purpose of this study is to investigate the effects of the locomotion orientation on salespeople' sales performance with the mediating effect of selling behavior(adaptive selling behavior, SOCO). And we figure out the relationship between customer-oriented selling behavior and adaptive selling behavior because those relationships are not clear. The authors infer research hypotheses based on literature review. We have confirmed the reliability and validity test and those results can be acceptable. Hypotheses test were conducted with structural equation modeling, AMOS. All paths in the research model reasoned by authors have been supported statistically at the significant level. This study with the theoretical implications is as follows. First, this study is the first attempt to investigate the path between locomotion orientation and adaptive selling behavior and SOCO. Secondly, there is an empirical conflict between our study and Franke and Park(2006)'s study. Our study was contradictory to Franke and Park(2006)'s consequences. And so, figuring out clearly those causal paths remains. This study with practical implications are as follows. First of all, the salespeople' selling performance was affected by adaptive selling behavior, customer-oriented selling behavior, and sales-oriented activities, such as the importance of selling behavior once again proven. It is necessary to enhance the capabilities that can be transformed into action appropriate to the needs of customers each sales step-by-step in the process of salespeople for various system through education and incentives, and to interact with customers and understand their customers relative to salespeople will. In order to enhance adaptive selling behavior, the company needs to do educational program and monitoring system with the positional promotion when salespeople get the high adaptive selling behavior. Secondly, the locomotion orientation of the salespeople is to cause this selling behavior. Management style to increase locomotion orientation is needed, which means, salespeople' superior about something should be conducted. In order to stimulate the selling behavior of the salespeople, most supervisors should use some managerial tools such as feedback, engagement, and rewards.

• 한국산업보건학회지
• /
• 제29권3호
• /
• pp.322-335
• /
• 2019

Objectives: The goal of this study is to standardize industry, process, and job within work environment measurement information. Methods: We selected 180 work environment measurement reports on 30 industries from a database monitored from 2014 to 2016 by the Korea Industrial Health Association. Ten industrial hygienists, each with over five years of experience in measurement, conducted a primary standardization of 180 reports. Two professional industrial hygienists with more than 20 years of experience each reviewed and revised the results of the primary standardization. We also examined the validity on the usefulness of the standardized database by the two industrial hygienists. Results: The final standardization results were classified into eight major categories, 23 sub-major categories, 39 minor categories, 53 unit categories and 70 sub-unit categories in the Korean Standard Industrial Classification (KSIC) 10th revision. A total of 161 processes were standardized, and there were 148 processes with K2B codes. Standard job was coded into 13 job groups including operator, automobile maintenance, nurse, maintenance, manager, excavating machine operator, forklift driver, radiologist, clinical pathologist, signer, researcher, kitchen assistant, and concrete reinforcement ironworker. Conclusions: Although the standardized information in this study may be only a part of the total information, it can be useful for improvement of the K2B system. Additional research is needed for an ongoing clean-up of data in the K2B and re-calibration and reclassification of standard processes until the future national exposure monitoring system is fully established.