• 한국산학기술학회논문지
• /
• 제2권2호
• /
• pp.7-10
• /
• 2001

보석이 포함된 장신구는 보석을 고정시키고 최대한 보석의 심미적 기능을 살리기 위해 후면부로부터 금속 난발(prongs)을 사용한다. 최근의 주얼리 산업은 빠른 유행주기 변화에 따른 신속한 개발을 위해 귀금속이 가능한한 적게 들어간 단발난집형의 목걸이 귀걸이류가 필요하다. 본 연구는 단발난집에 보석을 세팅하여 가볍고 안정적인 신개념의 목걸이를 개발하기 위하여 (주)아메스 개발부와 함께 단발난집 공정을 연구하였다. 보석의 측면부분에서 상측으로 중력방향에 대하여 직교하도록 트렌치를 가공하여 금속틀의 프롱을 접촉시키고 저융점을 갖는 소정의 Sn계솔더를 채용하여 트렌치부에 흡침된 솔더를 응고하여 접합을 완성하였다. 실시예로서 완성된 천연 자수정 스톤과 18K Au님의 단발난집에 적용한 결과 기존 제품에 비해 40% 이상의 Au 무게감소에 따른 비용절감과 우수한 착용감의 새로운 펜던트형 장신구의 개발이 가능하였다.

• Archives of Plastic Surgery
• /
• 제33권5호
• /
• pp.563-569
• /
• 2006

Purpose: In the correction of cleft lip, there have been various methods to minimize recurrence of the nasal deformity after primary nasal surgery. After cheiloplasty and primary nasal surgery, we tried to elongate the columella of the cleft side, to stretch the vestibular lining of cleft side, and to elevate the alar cartilage of the cleft side with a molding prong. Methods: We had fifteen cleft lip patients; 12 unilateral cases(6.3-8.2 months), and 3 bilateral cases(3 - 7.5 months). Immediately after primary repair of the cleft lip, the toboggan shaped molding prong was located to deep inside of vestibular web of the cleft side. It was persistently suspended by a silicone tube which was connected to the prong and the frontal scalp. The results were analyzed with $Photoshop^{(R)}$ photogrammetrically for 6 - 48 months with on average of 20.6 months. We measured the proportion index of columellar length-interalar distance for three times(preoperation, immediate postoperation, and postoperation) on the nasal base views. Results: In unilateral, the index had a significant increase statistically between preoperation(10.73) and immediate postoperation(23.96). It is supposed that columellar length was reconstructed to 105.80% of normal side. But, it was decreased to maintain 87.7% of normal side in postoperation(20.54). The results were similar in bilateral. The linear scars by suture penetrating nose skin were not discernable. Conclusion: In summary, placement of the molding prong could elongate the reconstructed columella with some relapse postoperatively.

• 한국환경과학회지
• /
• 제24권7호
• /
• pp.947-954
• /
• 2015

Dielectric barrier discharge plasma is a new technique in water pollutant degradation, which that is characterized by the production of chemically active species such as hydroxyl radicals, ozone, hydrogen peroxide, etc. If dissolving of plasma gas generated in the plasma reaction has increased, it is possible to increase the contaminant removal capacity. In this study, the improvement on the dissolving performance of plasma gas was evaluated by the indirect method measuring the overall oxygen transfer coefficient. Experiments were conducted to examine the effects of nozzle type, distance from water surface, air supply rate and liquid circulation rate. The experimental results showed that the $K_{La}$ value of the 3-prong nozzle is 2.67 times higher than the diffuser. The order of $K_{La}$ value with nozzle type ranked in the following order: 3-prong nozzle (inner diameter, less 1 mm) > circular nozzle (inner diameter, 1.5 mm) > ellipse nozzle (short diameter 1 mm, long diameter 2.5 mm) > circular nozzle (inner diameter, 3 mm). Optimal liquid circulation rate was appeared to be 1.7 L/min, the value of $K_{La}$ was 0.510 1/min. The value of $K_{La}$ with increasing air supply rate was revealed in the form of an exponential such as $K_{La}=0.3581e^{0.2919^*air\;flow\;rate}$.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2002년도 제13회 정기총회 및 2002년도 동계학술발표회
• /
• pp.260-261
• /
• 2002

For Near-field Scanning Optical Microscopy measurements, the fiber tip is glued on the side of one of the tuning fork prongs vertically to its extended direction. Higher Q-factor is attainable in this geometry than in the arrangement with the fiber tip parallel to the prong. A simple mechanical design is applied to hold the fiber tip above the gluing point. The overall tuning fork-fiber tip assembly gives another advantage of the flexible Q-factor enhancement. With this treatment, Q-factor higher than 3000 is easily achievable. As an operating instance, a grating is scanned for its one dimensional topographical image.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.1855-1860
• /
• 2010

Electric vehicles have reached a new level of development with introductions by Chrysler, Ford, Honda and Toyota. Today's charging technology includes conductive and inductive charging systems. There are three standardized charging levels: Level 1: charging can be done from a standard, grounded AC 120V, 3-prong outlet available in all homes; Level 2: charging is at AC 240V, 40 amp charging station with special consumer features to make it easy and convenient to plug in and charge EVs at home or at an EV charging station; Level 3: a high-powered charging "fast charge" technology currently under development that will provide a charge in less than 15 minutes. The incoming AC power is converted to DC and stored in the vehicle's batteries. In this paper, we investigated the application of urban railway DC electric power for electric car charging system.

• 대한수의학회지
• /
• 제44권2호
• /
• pp.317-322
• /
• 2004

This study was performed to evaluate echocardiographic parameters in dogs with experimental mitral regurgitation subjected to dobutamine stress testing. In 8 beagle dogs, a 4-prong grasping forceps was inserted into the left ventricle through the carotid artery with fluoroscopic guidance. The disruption of chordae or mitral valve leaflet was performed. Echocardiographic protocols included quantitative Doppler echocardiography and M-mode measurement for evaluating left ventricle function. After all measurement was obtained at rest, dobutamine was infused incrementally. In stress testing, all measurement also was performed at rest as the same method. In stress Doppler echocardiography, regurgitant fraction and aortic stroke volume was increased significantly (P<0.001). Effective regurgitant orifice and regurgitant volume was not changed. In M-mode examination, fractional shortening was increased significantly at stress test (P<0.001). From the results obtained in this study, it could be suggested that dobutamine stress echocardiography increase left ventricle performance in non-functional mitral regurgitation and quantitative Doppler echocardiography is non-invasive, accurate method in valvular regurgitation.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.559-559
• /
• 2012

We developed a new scheme for the highly sensitive near-field scanning optical microscope (NSOM) by using a dithering sample stage rather than a dithering probe. In the proposed scheme, the sample is directly loaded on one prong surface of a dithering bare tuning fork. Gap control between probe and sample is performed by detecting the shear force between an immobile fiber probe and the dithering sample. In a conventional NSOM, the Q factor drastically decreases from 7783 to 1000 or even to 100 by attaching a probe to the tuning fork. In our proposed NSOM, on the contrary, the Q factor does not change significantly, 7783 to 7480, when the sample is loaded directly to the tuning fork instead of attaching a probe. Consequently, the graphene sheets that cannot be observed by a conventional NSOM were clearly observed by the proposed method with sub-nanometer vertical resolution due to the extremely high Q factor.

• Tuberculosis and Respiratory Diseases
• /
• 제51권1호
• /
• pp.44-52
• /
• 2001

배 경 : 만성호흡부전증 환자에게 산소농축기는 간편하면서도 경제적인 의료장비이나 국내에서는 생산되지 않아 수입한 값 비싼 외국산산소농축기를 사용하고 있는 실정이다. 서강대학교에서 개발한 국산 산소농축기를 임상에 사용하기 전에 성능을 검증하고자, 외국산 산소농축기와 임상시험을 통하여 비교 분석함으로써 국산 산소농축기의 효능 및 안전성을 측정하였다. 대상 및 방법 : 임상시험은 1999년 4월부터 1999년 8월까지 36명의 다한증환자를 대상으로 시행되었다. 동일한 환자에게 국산 산소농축기와 외국산 산소농축기를 nasal prong을 사용하여 60분동안 분당 3리터의 양으로 교대 사용하였다 어떤 기계를 먼저 적용할 것인 지는 무작위배정방법을 이용하였다. 산소농축기 적용전후의 동맥혈 산소압, 동맥혈 COHb, 동맥혈 pH, 동맥혈 이산화탄소압, 맥박수, 혈압, 호흡수 등을 각각 측정하여 그 변화량을 비교 검증하였다. 결 과 : 효능면에서 볼 때 동맥혈 산소압의 변화량은 통계적으로 유의한 차이가 없었고, 안전성면에서도 동맥혈 pH, 동맥혈 이산화탄소압, 맥박수, 혈압, 호흡수, 혈중 COHb 등의 변화 차이를 발견할 수 없었다. 결 론 : 현재 개발중인 국산 산소 농축기의 시제품의 성능을 임상시험한 결과 외국산 산소 농축기와 비교하여 동등한 만족스러운 성능을 보였다.

• Journal of the Korean Wood Science and Technology
• /
• 제41권6호
• /
• pp.535-543
• /
• 2013

본 연구에서 국산 낙엽송재의 공학목재로의 이용가능성, 특히 교호집성재 라미나로서의 이용가능성을 확인하기 위하여 열기건조 중과 건조 후 판재 내 잔류응력을 분석하였다. 연구결과를 통해 이쿼라이징 처리에 의한 함수율 동일화 효과가 증명되었고, 컨디셔닝 처리에 의한 잔류응력의 감소효과가 정량화되었다. 건조 중 목재 내 잔류응력 분석을 위하여 프롱법과 슬라이스법을 실시하였다. 프롱 제작 후 표면경화율을 측정하였고, 슬라이스의 절단 후 탄성변형량을 기준으로 표면으로부터 약 10 mm 깊이까지의 건조응력을 정량적으로 분석하였다. T10-C4와 T12-D5 열기건조 스케줄 적용 시 열기건조 중 판재 표면의 인장응력과 압축응력은 모두 2.2 MPa을 넘지 않음을 확인하였다. 낙엽송의 횡단방향 인장강도와 압축강도가 평균 2.65 MPa, 4.60 MPa인 점을 고려하면, 더욱 강한 건조스케줄 적용이 추천된다. 건조 후처리에 의해 폭굽음과 비틀림을 약 40% 줄일 수 있었다.

• 한국환경교육학회지:환경교육
• /
• 제17권1호
• /
• pp.154-169
• /
• 2004

This research presents an analysis of some of the occupations associated with Korea‘s national strategic industries. Therefore, the objectives of this paper can be summarized as follows: By classifying existing occupations and identifying potential future ones, this paper will strive to present a systematic analysis of environmental related occupations. In order to achieve the objectives of this research, related literature was examined, a Delphi Survey was conducted. In order to select potential future occupations, this research used a qualitative method that involved interviews with specialists. More specifically, a Delphi Survey was used to collect the specialists' opinions. The potential occupations were selected using a three-prong procedure involving an analysis of related literature and materials, a Delphi Survey, as well the holding of conferences with specialists and visits to those in the actual field. Through this process, 33 different potential future occupations were selected.