• 제목/요약/키워드: Proton adsorption density

검색결과 4건 처리시간 0.018초

수소이온 흡착밀도의 고찰을 통한 고농도 알루미나 현탁액의 제조 (Preparation of Highly Concentrated Alumina Suspension through Investigstion of Proton Adsorption Density)

  • 김덕준;김환
    • 한국세라믹학회지
    • /
    • 제33권2호
    • /
    • pp.163-168
    • /
    • 1996
  • Measurements of proton adsorption density have been conducted in preparing alumina suspensions with aqueous solutions of HCL, HNO3, H2SO4 and H3PO4 And effects of anion acid concentration proton adsorption density and solid loading on the viscosity of the alumina suspensions have been investigated. Aqueous solutions of HCl. or HNO3 were suitable for the preparation of highly concentrated suspensions as the generation of surface charge on alumina particles was depressed by the specific adsorption of {{{{ {SO }`_{4 } ^{2- } }} and {{{{ { PO}`_{4 } ^{3- } }} Optimum conditions for maximizing solid loading were dependent upon proton adsorption density and acid concentration.

  • PDF

Analytical polarization curve of DMFC anode

  • Kulikovsky, A.A.
    • Advances in Energy Research
    • /
    • 제1권1호
    • /
    • pp.35-52
    • /
    • 2013
  • A model for DMFC anode performance is developed. The model takes into account potential--independent methanol adsorption on the catalyst surface, finite rate of proton transport through the anode catalyst layer (ACL), and a potential loss due to methanol transport in the anode backing layer. An approximate analytical half--cell polarization curve is derived and equations for the anode limiting current density are obtained. The polarization curve is fitted to the curves measured by Nordlund and Lindbergh and parameters resulted from the fitting are discussed.

산화피막전극을 이용한 디이소부틸니트로소아민의 전극반응 (Reactivities of Di-iso-butylnitrosoamine by Anodic Film Formed on Metals)

  • 황금소
    • 한국수산과학회지
    • /
    • 제14권2호
    • /
    • pp.94-102
    • /
    • 1981
  • 해수에서 전기 전도성이 있는 산화 피막전극을 사용하여 금속 산화피막 전극들의 특성과 발암성 원인물질인 DBNA의 전극 반응성을 규명하는데 필요한 기초자료를 potential drop방법과 galvanostatic방법으로 얻어서 다음과 같은 결론을 내렸다. 1) $9\%_{\circ}$해수에 음극반응 억제제 DBNA를 첨가한 경우 알루미늄 산화피막 전극과 아연 산하피막 전극은potential drop현상을 나타내지 못 했으나 납 산화피막 전극과 구리 신화피막 전극은 피막전극으로서 적합한 기능을 가졌음을 알았다. 2) 제1단계 음극반응의 transition time이 $0.22\sim1.40sec$범위의 1분이내 값이므로 산화피막을 통과한 양성자는 확산$\rightarrow$흡착과정의 음극반응을 했다. 3) 0.5M NaCl수용액과 $9\%_{\circ}$해수에서 얻어진 transition time 값들이 대체로 일치한 것은 금속의 종류에 관계없이 산화피막을 통과한 양성자의 확산속도가 인정전류밀도 범위에서 인정하였기 때문이다. 4) $1.9\times10^{-4}\sim5.0\times10^{-6}\;amp/cm^2$의 전류밀도 범위에서 해수와 해수에 억제제 DBNA를 첨가했을때 얻어진 $\tau_{1}/4$값들의 $E_{1}/4$값들의 차가 각각 0.06sec와 0.53v있으므로, 억제 DBNA의 음극반응은 주로 흡착$\rightarrow$확산과정 이었다. 5) 알루미늄 산화피막과 아연 산화피막의 표면에 흡착된 전재질의 흡착량이 납 산화피막과 구리 산화피막보다 많은 것은 피막표면에 생성된 불규칙한 기공 생성 수가 증가하였기 때문이다.

  • PDF

수용액 내 캐올리나이트와 할로이사이트의 표면화학 특성: 표면복합반응 모델링 (Surface Chemical Properties of Aqueous Kaolinite and Halloysite: Surface Complexation Modeling)

  • 장세정;김수진
    • 한국광물학회지
    • /
    • 제17권2호
    • /
    • pp.157-168
    • /
    • 2004
  • 수용액 내 캐올리나이트와 할로이사이트의 표면화학 특성을 전위차 적정 실험과 FITEQL3.2 프로그램을 이용하여 연구하였다. 표면복합반응 모델 중 일정용량 모델을 적용하였으며, 표면을 사면체 자리와 팔면체 자리로 나누어 설정한 2 sites - 3 $pK_{a/s}$ 모델은 캐올리나이트와 할로이사이트의 표면화학 특성을 설명하는데 적합하였다. 두 점토광물 표면은 pH 4 이상에서 음전하를 띄며 pH가 높아질수록 양성자 표면 전하 밀도는 낮아진다. 산성 및 중성 영역에선 Si 사리(≡$SiO^{-}$ )가, 염기성 영역에선 Al 자리(≡$AlO^{-}$)가 양이온을 흡착하는데 중요한 역할을 할 것으로 예상된다. 모델링 결과 캐올리나이트의 경우 $pK_{a2(si)}$ /$^{int}$, p $K_{al(Al) }$ /$^{int}$ /, $pK_{a2}$ $(Al)^{int}$ /는 각각 4.436. 4.564, 및 8.461이며, 할로이사이트의 경우는 각각 7.852, 3.885, 7.084이다. 캐올리나이트의 총 Si 표면자리 농도와 총 Al 표면자리 농도는 0.215와 0.148 mM이며, 할로이사이트의 경우는 0.357과 0.246 mM이다 두 광물 모두 Si 표면자리 밀도 : Al 표면자리 밀도가 1 : 0.69로 비슷하다. 캐올리나이트의 총 표면자리 밀도는 3.774 sites/$nm^2$로 할로이사이트의 2.292 sites/n $m^2$ 값보다 약 1.6배정도 높다.다.